etsysDot11ExtMulticastTxRate
ENTERASYS-IEEE802DOT11EXT-MIB ·
.1.3.6.1.4.1.5624.1.2.9.1.2.1.1.7
Object
column
r/w
Enumeration
This value specifies the Multicast data transmission
rate of the AP. It is implemented when cards that operate
faster than the 2Mbit 802.11 standard are inserted.
This object must be saved across a system reset and/or a
power cycle.
Context
- MIB
- ENTERASYS-IEEE802DOT11EXT-MIB
- OID
.1.3.6.1.4.1.5624.1.2.9.1.2.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- etsysDot11ExtGeneralEntry
- Table
- etsysDot11ExtGeneralTable
- Siblings
- 8
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| etsysDot11ExtPCCardType The type of PC card inserted in the Access Point. | column | Enumeration | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.1 |
| etsysDot11ExtPCCardVersions Specifies the version identifiers for the PC card.
This will indicate both the Hardware and the Firmware
versions. | column | OctetString | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.2 |
| etsysDot11ExtBridgeMode CURRENT Access Point bridge mode state.
In workgroup mode all communications between clients
passes through the Access Point.
LAN-to-LAN mode is t… | column | Enumeration | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.3 |
| etsysDot11ExtResetOptions noReset (0)
No reset is performed. A 'get' on this object always returns
this value.
resetRadioCardIfNecessary (1)
Some parameters can only be given to the card at… | column | Enumeration | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.4 |
| etsysDot11ExtSystemScale Specifies the CURRENT Access Point density in the
Extended Service Set (ESS).
This object must be saved across a system reset and/or a
power cycle. | column | Enumeration | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.5 |
| etsysDot11ExtSecureAccess When this mode is set to enabled, the AP will only associate
with stations that have the same network name as the AP.
When this mode is set to disabled, a station with the
network… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.6 |
| etsysDot11ExtIntraBSSRelay When this mode is enabled the AP entity within the PC Card will
relay frames to destined for stations associated with it and will NOT
forward them to the bridging entity within th… | column | P-BRIDGE-MIBEnabledStatus | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.8 |
| etsysDot11ExtStationName DURABLE:
The wireless station name sent out as part of
the beacon messages. Valid only when a DS card
is inserted in the Access Point. | column | OctetString | .1.3.6.1.4.1.5624.1.2.9.1.2.1.1.9 |