dvmIfDownChannelId
ELECTROLINE-DVM-STATUS-MIB ·
.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.1
Object
column
Integer32
The Cable Modem Termination System identification of the downstream channel within this particular MAC interface. if the interface is down, the object returns the most current value. If the downstream channel ID is unknown, this object returns a value of 0.
Context
- MIB
- ELECTROLINE-DVM-STATUS-MIB
- OID
.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dvmIfDownstreamChannelEntry
- Table
- dvmIfDownstreamChannelTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dvmIfDownChannelFrequency The center of the downstream frequency associated with
this channel. This object will return the current tuner
frequency. | column | hertz Integer32 | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.2 |
| dvmIfDownChannelWidth The bandwidth of this downstream channel. Most
implementations are expected to support a channel width
of 6 MHz (North America) and/or 8 MHz (Europe). See the
associated complia… | column | hertz Integer32 | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.3 |
| dvmIfDownChannelModulation The modulation type associated with this downstream
channel. If the interface is down, this object either
returns the configured value (CMTS), the most current
value (CM), or the… | column | Enumeration | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.4 |
| dvmIfDownChannelInterleave The Forward Error Correction (FEC) interleaving used
for this downstream channel.
Values are defined as follows:
taps8Increment16(3): protection 5.9/4.1 usec,
… | column | Enumeration | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.5 |
| dvmIfDownChannelPower At the DVM, the received power level at the RF front-end.
If the interface is down, the value of 0. | column | dBmV TenthdBmV | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.6 |
| dvmIfDownChannelAnnex The value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-T J.83 is used.
(equivalent to E… | column | Enumeration | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.7 |
| dvmIfDownChannelSymbolRate This value indicates the channel rate in Symbol per second | column | Integer32 | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.8 |
| dvmIfDownChannelTunerModule The value of this object indicates the tuner module number
on which the hardware channel is mapped.
1 and 2 are wideband tuners internal to the BCM3380;
3 to 6 are external narro… | column | Integer32 | .1.3.6.1.4.1.5802.1.3.1.3.3.3.1.9 |