ELECTROLINE-DVM-STATUS-MIB Table View

This table describes the attributes of downstream
channels (frequency bands) at Dvm's input.

dvmIfDownstreamChannelEntry row .1.3.6.1.4.1.5802.1.3.1.3.3.3.1

An entry provides a list of attributes for a single
downstream channel.

Indexes

IF-MIBifIndex

Column	Syntax	OID
dvmIfDownChannelId The Cable Modem Termination System identification of the downstream channel within this particular MAC interface. if the interface is down, the object returns the most current value. If the downstream channel ID is unk…	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.1
dvmIfDownChannelFrequency The center of the downstream frequency associated with this channel. This object will return the current tuner frequency.	hertzInteger32 Constraints: range: 0-1000000000	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.2
dvmIfDownChannelWidth The bandwidth of this downstream channel. Most implementations are expected to support a channel width of 6 MHz (North America) and/or 8 MHz (Europe). See the associated compliance object for a description of the vali…	hertzInteger32 Constraints: range: 0-16000000	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.3
dvmIfDownChannelModulation The modulation type associated with this downstream channel. If the interface is down, this object either returns the configured value (CMTS), the most current value (CM), or the value of unknown(1). See the associate…	Enumeration Enumerated Values: 1 unknown 2 other 3 qam64 4 qam256	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.4
dvmIfDownChannelInterleave The Forward Error Correction (FEC) interleaving used for this downstream channel. Values are defined as follows: taps8Increment16(3): protection 5.9/4.1 usec, latency .22/.15 msec taps16Incremen…	Enumeration Enumerated Values: 1 unknown 2 other 3 taps8Increment16 4 taps16Increment8 5 taps32Increment4 6 taps64Increment2 7 taps128Increment1 8 taps12increment17	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.5
dvmIfDownChannelPower At the DVM, the received power level at the RF front-end. If the interface is down, the value of 0.	dBmVTenthdBmV	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.6
dvmIfDownChannelAnnex The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-T J.83 is used. (equivalent to EN 300 429) annexB : Annex B from ITU-T J…	Enumeration Enumerated Values: 1 unknown 2 other 3 annexA 4 annexB 5 annexC	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.7
dvmIfDownChannelSymbolRate This value indicates the channel rate in Symbol per second	Integer32 Constraints: range: 0-1000000000	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.8
dvmIfDownChannelTunerModule The value of this object indicates the tuner module number on which the hardware channel is mapped. 1 and 2 are wideband tuners internal to the BCM3380; 3 to 6 are external narrowband tuners -1 unmapped	Integer32 Constraints: range: -1-6	.1.3.6.1.4.1.5802.1.3.1.3.3.3.1.9

This table describes the attributes of attached upstream
channels.

dvmIfUpstreamChannelEntry row .1.3.6.1.4.1.5802.1.3.1.3.3.4.1

List of attributes for a single upstream channel.

Indexes

IF-MIBifIndex

Column	Syntax	OID
dvmIfUpChannelId The CMTS identification of the upstream channel.	Integer32 Constraints: range: 0-255	.1.3.6.1.4.1.5802.1.3.1.3.3.4.1.1
dvmIfUpChannelFrequency The center of the frequency band associated with this upstream interface. This object returns 0 if the frequency is undefined or unknown. Minimum permitted upstream frequency is 5,000,000 Hz for current technology. S…	hertzInteger32 Constraints: range: 0-1000000000	.1.3.6.1.4.1.5802.1.3.1.3.3.4.1.2
dvmIfUpChannelWidth The bandwidth of this upstream interface. This object returns 0 if the interface width is undefined or unknown. Minimum permitted interface width is currently 200,000 Hz. See the associated conformance object for write…	hertzInteger32 Constraints: range: 0-64000000	.1.3.6.1.4.1.5802.1.3.1.3.3.4.1.3
dvmIfUpChannelTxPower The operational transmit power for the attached upstream channel at the output of the DVM.E	dBmVTenthdBmV	.1.3.6.1.4.1.5802.1.3.1.3.3.4.1.4
dvmIfUpChannelSymbolRate This value indicates the channel rate in kSymbol per second	Integer32 Constraints: range: 0-1000000000	.1.3.6.1.4.1.5802.1.3.1.3.3.4.1.5

At the CM, describes the PHY signal quality of downstream
channels.

dvmIfSignalQualityEntry row .1.3.6.1.4.1.5802.1.3.1.3.3.5.1

At the CM, this object describes the PHY characteristics of
a downstream channel.

Indexes

IF-MIBifIndex

Column	Syntax	OID
dvmIfSigQUnerroreds Codewords received on this channel without error. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuities in the value of this counter can occur at reinitialization…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5802.1.3.1.3.3.5.1.1
dvmIfSigQCorrecteds Codewords received on this channel with correctable errors. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuities in the value of this counter can occur at reini…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5802.1.3.1.3.3.5.1.2
dvmIfSigQUncorrectables Codewords received on this channel with uncorrectable errors. This includes all codewords, whether or not they were part of frames destined for this device. Discontinuities in the value of this counter can occur at rei…	codewordsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.5802.1.3.1.3.3.5.1.3
dvmIfSigQSignalNoise Signal/Noise ratio as perceived for this channel. At the CM, this object describes the Signal/Noise of the downstream channel.	TenthdBTenthdB	.1.3.6.1.4.1.5802.1.3.1.3.3.5.1.4
dvmIfSigQMicroreflections Microreflections, including in-channel response as perceived on this interface, measured in dBc below the signal level. This object is not assumed to return an absolutely accurate value, but it gives a rough indication …	-dBcInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.5802.1.3.1.3.3.5.1.5

A table containing information about the Regulated Power.

dvmDCPowerEntry row .1.3.6.1.4.1.5802.1.3.1.3.3.11.1

A list of information about the Regulated Power.

Indexes

dvmDCPowerIndex

Column	Syntax	OID
dvmDCPowerIndex Index into the dvmDCPowerTable.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.5802.1.3.1.3.3.11.1.1
dvmDCPowerVoltage Returns the regulated power voltage. Units in 0.01 Volts.	0.01VdcHundredthsVolts Type Constraints: range: 0..65535	.1.3.6.1.4.1.5802.1.3.1.3.3.11.1.2
dvmDCPowerName Identifies the Physical name of the Power Supply. For example: 3.3V Supply	RFC1213-MIBDisplayString	.1.3.6.1.4.1.5802.1.3.1.3.3.11.1.3