xstInstanceCfgPathCostMethod
ECS4810-28TS-MIB ·
.1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.16
Object
column
StaPathCostMode
For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.
When the value of this MIB object is changed, the path cost
of all ports will be reassigned to the default path cost
values based on the new spanning tree path cost mode and the
ports' speed.
When the value of this MIB object is set to long(2),
the xstInstancePortPathCost MIB object must be used in order
to retrieve/configure the spanning tree port path cost as a
32-bit value. The set operation on dot1dStpPortPathCost in
BRIDGE-MIB will be rejected. While retrieving the value of
dot1dStpPortPathCost, the maximum value of 65535 will be
returned if the value of xstInstancePortPathCost for the same
instance exceeds 65535.
When the value of this MIB object is set to short(1),
the dot1dStpPortPathCost in BRIDGE-MIB must be used.
Context
- MIB
- ECS4810-28TS-MIB
- OID
.1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- xstInstanceCfgEntry
- Table
- xstInstanceCfgTable
- Siblings
- 15
Syntax
StaPathCostMode
- Source
- StaPathCostMode
- Base type
Enumeration
Values & Constraints
Type Values
1 | short |
2 | long |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xstInstanceCfgIndex An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance. | column | Integer32 | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.1 |
| xstInstanceCfgHoldTime This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second. | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.10 |
| xstInstanceCfgForwardDelay For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.11 |
| xstInstanceCfgBridgeMaxAge For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.12 |
| xstInstanceCfgBridgeHelloTime For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.13 |
| xstInstanceCfgBridgeForwardDelay For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that th… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.14 |
| xstInstanceCfgTxHoldCount For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.15 |
| xstInstanceCfgPriority The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096. | column | Integer32 | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.2 |
| xstInstanceCfgTimeSinceTopologyChange The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST. | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.3 |
| xstInstanceCfgTopChanges The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.4 |
| xstInstanceCfgDesignatedRoot The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this nod… | column | BRIDGE-MIBBridgeId | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.5 |
| xstInstanceCfgRootCost The cost of the path to the root as seen from
this bridge of the RST or MST. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.6 |
| xstInstanceCfgRootPort The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.7 |
| xstInstanceCfgMaxAge The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in un… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.8 |
| xstInstanceCfgHelloTime The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in unit… | column | BRIDGE-MIBTimeout | .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.9 |