ECS4810-28TS-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
14
Rows
14
Columns
89

switchInfoTable

table
.1.3.6.1.4.1.259.10.1.18.1.1.3 · 1 row entry · 11 columns
Open in standard view 
Table of descriptive and status information about
switches in this system.
switchInfoEntry entry .1.3.6.1.4.1.259.10.1.18.1.1.3.1
An entry in the table, containing information
about a single switch in this system. The value
is always equal 1 in ECS4810-28TS product.
Indexes
swUnitIndex
Column Syntax OID
swUnitIndex
This object identifies the switch within the system
for which this entry contains information. This
value can never be greater than switchNumber.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.1
swHardwareVer
Hardware version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.2
swMicrocodeVer
Microcode version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.3
swLoaderVer
Loader version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.4
swBootRomVer
Boot ROM code version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.5
swOpCodeVer
Operation code version of the main board.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.6
swPortNumber
The total port number of this switch
(including expansion slot).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.7
swPowerStatus
Indicates the switch using internalPower(1),
redundantPower(2) or both(3)
Enumeration
Enumerated Values:
1internalPower
2redundantPower
3internalAndRedundantPower
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.8
swRoleInSystem
Indicates the switch is master(1), backupMaster(2)
or slave(3) in this system.
Enumeration
Enumerated Values:
1master
2backupMaster
3slave
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.9
swSerialNumber
Serial number of the switch.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.10
swServiceTag
Service tag serial-number of the switch.
OctetString
Constraints:
range: 0-80
 .1.3.6.1.4.1.259.10.1.18.1.1.3.1.13

portTable

table
.1.3.6.1.4.1.259.10.1.18.1.2.1 · 1 row entry · 10 columns
Open in standard view 
Table of descriptive and status information about
configuration of each switch port (including expansion slot)
in this system. This table also contains information
about each trunk (similar to Cisco's EtherChannel).
portEntry entry .1.3.6.1.4.1.259.10.1.18.1.2.1.1
An entry in the table, containing information
about configuration in one switch port of the switch.
Indexes
portIndex
Column Syntax OID
portIndex
This is defined as ifIndex in the IF-MIB.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.1
portName
Indicates the port name. This is same as
ifAlias in the IF-MIB (RFC2863 or later).
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.2
portType
Indicates the port type.
Enumeration
Enumerated Values:
1other
2hundredBaseTX
3hundredBaseFX
4thousandBaseSX
5thousandBaseLX
6thousandBaseT
7thousandBaseGBIC
8thousandBaseSfp
9hundredBaseFxScSingleMode
10hundredBaseFxScMultiMode
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.3
portSpeedDpxCfg
Set the port speed and duplex mode as follows:
halfDuplex10(2) - 10Mbps and half duplex mode
fullDuplex10(3) - 10Mbps and full duplex mode
halfDuplex100(4) - 100Mbps and half duplex mode
fullDuplex100(5) - 100…
Enumerationr/w
Enumerated Values:
1reserved
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.4
portFlowCtrlCfg
(1) Flow control mechanism is enabled.
If the port type is hundredBaseTX or thousandBaseSX:
When the port is operating in halfDuplex mode, the
port uses backPressure flow control mechanism. When
the port is operating in…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3backPressure
4dot3xFlowControl
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.5
portCapabilities
Port capabilities.
Bits
Enumerated Values:
0portCap10half
1portCap10full
2portCap100half
3portCap100full
4portCap1000half
5portCap1000full
6reserved6
7reserved7
8reserved8
9reserved9
10reserved10
11reserved11
12reserved12
13reserved13
14portCapSym
15portCapFlowCtrl
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.6
portAutonegotiation
Whether autonegotiation is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.7
portSpeedDpxStatus
The operating speed and duplex mode of the
switched port. If this index is a trunk,
the speed is the speed of its individual members.
If this index is a trunk and the result
is inconsistent among its member ports, this …
Enumeration
Enumerated Values:
1error
2halfDuplex10
3fullDuplex10
4halfDuplex100
5fullDuplex100
6halfDuplex1000
7fullDuplex1000
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.8
portFlowCtrlStatus
(2) BackPressure flow control machanism is used.
(3) IEEE 802.3 flow control machanism is used.
(4) Flow control mechanism is disabled.
If this index is a trunk and the result
is inconsistent among its member ports, thi…
Enumeration
Enumerated Values:
1error
2backPressure
3dot3xFlowControl
4none
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.9
portTrunkIndex
The trunk to which this port belongs. A value of 0
means that this port does not belong to any trunk.
A value greater than zero means that this port
belongs to trunk at trunkIndex, defined by the
corresponding trunkPort…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.2.1.1.10

trunkTable

table
.1.3.6.1.4.1.259.10.1.18.1.3.3 · 1 row entry · 4 columns
Open in standard view 
Table of descriptive and status information about
configuration of each trunk,
similar to Cisco EtherChannel.
trunkEntry entry .1.3.6.1.4.1.259.10.1.18.1.3.3.1
An entry in the table, containing information
about configuration in one trunk of the switch.
Indexes
trunkIndex
Column Syntax OID
trunkIndex
This object identifies the trunk within the switch
for which this entry contains information.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.259.10.1.18.1.3.3.1.1
trunkPorts
The complete set of ports currently associated with
this trunk.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.259.10.1.18.1.3.3.1.2
trunkCreation
A value of static(1) means a statically configured trunk.
A value of lacp(2) means an LACP-configured trunk.
Enumeration
Enumerated Values:
1static
2lacp
 .1.3.6.1.4.1.259.10.1.18.1.3.3.1.3
trunkStatus
Writing this to valid(1) creates an entry.
Writing this to invalid(2) destroys an entry.
A trunk created by LACP cannot be manually destroyed
or (re)configured.
ValidStatusr/w
Textual Convention: ValidStatus Enumeration
Type Values:
1valid
2invalid
 .1.3.6.1.4.1.259.10.1.18.1.3.3.1.4

lacpPortTable

table
.1.3.6.1.4.1.259.10.1.18.1.4.1 · 1 row entry · 2 columns
Open in standard view 
Table for LACP port configuration.
lacpPortEntry entry .1.3.6.1.4.1.259.10.1.18.1.4.1.1
Entry for LACP port configuration.
Indexes
lacpPortIndex
Column Syntax OID
lacpPortIndex
This is defined as ifIndex in the IF-MIB.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.4.1.1.1
lacpPortStatus
Whether 802.3ad LACP is enabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.259.10.1.18.1.4.1.1.2

staPortTable

table
.1.3.6.1.4.1.259.10.1.18.1.5.2 · 1 row entry · 9 columns
Open in standard view 
The table manages port settings for Spanning Tree 
Protocol 802.1d, 802.1w or 802.1s depending on the 
value specified by staProtocolType.
staPortEntry entry .1.3.6.1.4.1.259.10.1.18.1.5.2.1
The conceptual entry of staPortTable.
Indexes
staPortIndex
Column Syntax OID
staPortIndex
The port and the trunk (excluding trunk member ports)
interface of the staPortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dStpPort i…
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.1
staPortFastForward
Whether fast forwarding is enabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.2
staPortProtocolMigration
When operating in RSTP (version 2) mode, writing true(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns false(2) when read.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.3
staPortAdminEdgePort
The administrative value of the edge port parameter. A
value of true(1) indicates that this port should be
assumed as an edge-port and a value of false(2) indicates
that this port should be assumed as a non-edge-port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.4
staPortOperEdgePort
The operational value of the edge port parameter. The object is
initialized to the value of staPortAdminEdgePort and is set false
when a BPDU is received.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.5
staPortAdminPointToPoint
The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of for…
Enumerationr/w
Enumerated Values:
0forceTrue
1forceFalse
2auto
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.6
staPortOperPointToPoint
The operational point-to-point status of the LAN segment
attached to this port. This indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-de…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.7
staPortLongPathCost
The contribution of this port to the path cost (in 32
bits value) of paths towards the spanning tree root which
include this port.

This object is used to configure the spanning tree port
path cost in the …
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.8
staPortSystemStatus
Per-port spanning tree status.
(1) Spanning tree protocol is enabled.
(2) Spanning tree protocol is disabled.
P-BRIDGE-MIBEnabledStatusr/w
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.259.10.1.18.1.5.2.1.9

xstInstanceCfgTable

table
.1.3.6.1.4.1.259.10.1.18.1.5.6.4 · 1 row entry · 16 columns
Open in standard view 
This table is used to configure the property of a specific
instance in Multiple Spanning Tree or Rapid Spanning Tree.
If Rapid Spanning Tree protocol is in use, the
mstInstanceEditIndex is always 0.
xstInstanceCfgEntry entry .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1
A conceptual row containing the property of the RST or MST instance.
Indexes
xstInstanceCfgIndex
Column Syntax OID
xstInstanceCfgIndex
An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.1
xstInstanceCfgPriority
The priority of a specific spanning tree instance.
The value assigned should be in the range 0-61440
in steps of 4096.
Integer32r/w
Constraints:
range: 0-61440
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.2
xstInstanceCfgTimeSinceTopologyChange
The time (in hundredths of a second) since the last topology
change detected by the bridge entity in RST or MST.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.3
xstInstanceCfgTopChanges
The total number of topology changes detected by
this bridge in RST or MST since the management entity
was last reset or initialized.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.4
xstInstanceCfgDesignatedRoot
The bridge identifier of the root of the spanning
tree as determined by the Multiple Spanning Tree Protocol. (802.1s)
or Rapid Spanning Tree Protocol (802.1w) executed by this node.
This value is used as the root identi…
BRIDGE-MIBBridgeId
Textual Convention: BRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.5
xstInstanceCfgRootCost
The cost of the path to the root as seen from
this bridge of the RST or MST.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.6
xstInstanceCfgRootPort
The number of the port which offers the
lowest cost path from this bridge to the root
bridge of the RST or MST.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.7
xstInstanceCfgMaxAge
The maximum age of Multiple Spanning Tree Protocol (802.1s)
or Rapid Spanning Tree Protocol (802.1w) information learned
from the network on any port before it is discarded,
in units of hundredths of a second. This is t…
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.8
xstInstanceCfgHelloTime
The amount of time between the transmission of
configuration bridge PDUs by this node on any port
when it is the root of the specific spanning tree or trying
to become so, in units of hundredths of a second.
This is the…
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.9
xstInstanceCfgHoldTime
This time value determines the interval length
during which no more than two configuration bridge
PDUs shall be transmitted by this node, in units
of hundredths of a second.
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.10
xstInstanceCfgForwardDelay
For RST or MST protocol, this time value, measured in units of
hundredths of a second, controls how fast a port changes
its spanning state when moving towards the forwarding
state. The value determines how long the por…
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.11
xstInstanceCfgBridgeMaxAge
For RST or MST protocol, the time (in hundredths of second)
that all bridges use for MaxAge when this bridge is acting
as the root. Note that 802.1D-1990 specifies that the range
for this parameter is related to the val…
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.12
xstInstanceCfgBridgeHelloTime
For RST or MST protocol,the time (in hundredths of a second) that
all bridges use for HelloTime when this bridge is acting
as the root. The granularity of this timer is specified
by 802.1D-1990 to be 1 second.
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.13
xstInstanceCfgBridgeForwardDelay
For RST or MST protocol, the time (in hundredths of a second)
that all bridges use for ForwardDelay when this bridge
is acting as the root.
Note that 802.1D-1990 specifies that the range for this
parameter is related to…
BRIDGE-MIBTimeout
Textual Convention: BRIDGE-MIBTimeout Integer32
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.14
xstInstanceCfgTxHoldCount
For RST or MST protocol, the value used by the port transmit
state machine to limit the maximum transmission rate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.15
xstInstanceCfgPathCostMethod
For RST or MST protocol, this indicates the type of spanning tree path
cost mode used by the switch. The mode applies to all instances of the
Spanning Tree protocol running on the switch.

When the value o…
StaPathCostMode
Textual Convention: StaPathCostMode Enumeration
Type Values:
1short
2long
 .1.3.6.1.4.1.259.10.1.18.1.5.6.4.1.16

xstInstancePortTable

table
.1.3.6.1.4.1.259.10.1.18.1.5.6.5 · 1 row entry · 12 columns
Open in standard view 
The extension table for dot1dStpPortEntry to provide
additional Spanning Tree information and configuration.
xstInstancePortEntry entry .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1
The conceptual row for xstInstancePortTable.
Indexes
xstInstancePortInstance xstInstancePortPort
Column Syntax OID
xstInstancePortInstance
The instance of the MSTP.
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.1
xstInstancePortPort
The port and the trunk (excluding trunk member ports)
interface of the mstInstancePortTable. The interface identified
by a particular value of this index is the same interface
as identified by the same value of dot1dStp…
Integer32
Constraints:
range: 1-100
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.2
xstInstancePortPriority
Defines the priority used for this port in the Spanning
Tree Algorithm. If the path cost for all ports on a
switch is the same, the port with the highest priority
(i.e., lowest value) will be configured as an active lin…
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.3
xstInstancePortState
The port's current state as defined by application of
the Spanning Tree Protocol. This state controls what
action a port takes on reception of a frame:
discarding(1): Port receives configuration messages,
…
Enumeration
Enumerated Values:
1discarding
2learning
3forwarding
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.4
xstInstancePortEnable
The enabled/disabled status of the port.
P-BRIDGE-MIBEnabledStatus
Textual Convention: P-BRIDGE-MIBEnabledStatus Enumeration
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.5
xstInstancePortPathCost
The pathcost of the RST or MST in the range 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher val…
Integer32r/w
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.6
xstInstancePortDesignatedRoot
The unique bridge identifier of the bridge
recorded as the root in the configuration BPDUs
transmitted by the designated bridge for the
segment to which the port is attached.
BRIDGE-MIBBridgeId
Textual Convention: BRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.7
xstInstancePortDesignatedCost
The path cost of the designated port of the
segment connected to this port. This value is
compared to the root path cost field in received
bridge PDUs.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.8
xstInstancePortDesignatedBridge
The bridge identifier of the bridge which this
port considers to be the designated bridge for
this port's segment.
BRIDGE-MIBBridgeId
Textual Convention: BRIDGE-MIBBridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.9
xstInstancePortDesignatedPort
The port identifier of the port on the designated
bridge for this port's segment.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.10
xstInstancePortForwardTransitions
The number of times this port has transitioned
from the learning state to the forwarding state.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.11
xstInstancePortPortRole
The role of the port in the RST or MST protocol:
(1) The port has no role within the spanning tree
(2) The port is part of the active topology connecting
the bridge to the root bridge (i.e., root port)
(3) The port …
Enumeration
Enumerated Values:
1disabled
2root
3designated
4alternate
5backup
6master
 .1.3.6.1.4.1.259.10.1.18.1.5.6.5.1.12

mstInstanceEditTable

table
.1.3.6.1.4.1.259.10.1.18.1.5.6.6 · 1 row entry · 6 columns
Open in standard view 
The Multiple Spanning Tree region instance vlan configuration table.
Please read the actual instance vlan mapped in the mstInstanceOperTable.
mstInstanceEditEntry entry .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1
A conceptual row containing the status of the MSTP instance.
Indexes
mstInstanceEditIndex
Column Syntax OID
mstInstanceEditIndex
An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1.1
mstInstanceEditVlansMap
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1.2
mstInstanceEditVlansMap2k
A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
throug…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1.3
mstInstanceEditVlansMap3k
A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
throug…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1.4
mstInstanceEditVlansMap4k
A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
throug…
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1.5
mstInstanceEditRemainingHops
The remaining hop count for this MST instance.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.259.10.1.18.1.5.6.6.1.6

mstInstanceOperTable

table
.1.3.6.1.4.1.259.10.1.18.1.5.6.7 · 1 row entry · 5 columns
Open in standard view 
The Multiple Spanning Tree region instance vlan mapped table.
mstInstanceOperEntry entry .1.3.6.1.4.1.259.10.1.18.1.5.6.7.1
A conceptual row containing the status of the MSTP instance.
Indexes
mstInstanceOperIndex
Column Syntax OID
mstInstanceOperIndex
An arbitrary integer within the range from 1 to the value of
the maximum instance that uniquely identifies a spanning
tree instance.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.259.10.1.18.1.5.6.7.1.1
mstInstanceOperVlansMap
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with vlanIndex values
of 0 through 7; the second octet to VLANs 8 through
15; etc., The most significant bit of each octet
corresponds…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.7.1.2
mstInstanceOperVlansMap2k
A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 1024 through 2047. The
first octet corresponds to VLANs with vlanIndex values
of 1024 through 1031; the second octet to VLANs 1032
throug…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.7.1.3
mstInstanceOperVlansMap3k
A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 2048 through 3071. The
first octet corresponds to VLANs with vlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
throug…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.7.1.4
mstInstanceOperVlansMap4k
A string of octets containing one bit per VLAN for
VLANS with vlanIndex values of 3072 through 4095. The
first octet corresponds to VLANs with vlanIndex values
of 3072 through 3079; the second octet to VLANs 3080
throug…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.259.10.1.18.1.5.6.7.1.5

vlanTable

table
.1.3.6.1.4.1.259.10.1.18.1.12.1 · 1 row entry · 2 columns
Open in standard view 
Table for VLAN configuration.
vlanEntry entry .1.3.6.1.4.1.259.10.1.18.1.12.1.1
Entry for VLAN configuration.
Indexes
vlanIndex
Column Syntax OID
vlanIndex
Same is dot1qVlanIndex in the Q-BRIDGE-MIB.
This table has only one entry - the entry for
the VLAN of the management interface.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.259.10.1.18.1.12.1.1.1
vlanAddressMethod
Method to get the IP address.
Enumerationr/w
Enumerated Values:
1user
2dhcp
 .1.3.6.1.4.1.259.10.1.18.1.12.1.1.2

vlanPortTable

table
.1.3.6.1.4.1.259.10.1.18.1.12.2 · 1 row entry · 3 columns
Open in standard view 
Table for port configuration in VLAN.
vlanPortEntry entry .1.3.6.1.4.1.259.10.1.18.1.12.2.1
Entry for port configuration in VLAN.
Indexes
vlanPortIndex
Column Syntax OID
vlanPortIndex
This is defined as ifIndex in the IF-MIB.
Integer32
Constraints:
range: 1-44
 .1.3.6.1.4.1.259.10.1.18.1.12.2.1.1
vlanPortMode
This variable sets the 802.1Q VLAN mode.
Setting it to hybrid(1) sets a hybrid link.
Setting it to dot1qTrunk(2) sets a trunk link.
Setting it to access(3) sets an access link, but
it is not supported in ECS4810-28TS pr…
Enumerationr/w
Enumerated Values:
1hybrid
2dot1qTrunk
3access
4vlanUnaware
 .1.3.6.1.4.1.259.10.1.18.1.12.2.1.2
vlanPortPrivateVlanType
The port type defined for Private vlan. In a private VLAN,
communication between isolated ports in that private VLAN is not permitted.
Enumerationr/w
Enumerated Values:
1non-isolated
2isolated
 .1.3.6.1.4.1.259.10.1.18.1.12.2.1.3

sntpServerTable

table
.1.3.6.1.4.1.259.10.1.18.1.23.1.4 · 1 row entry · 2 columns
Open in standard view 
Table for SNTP servers
sntpServerEntry entry .1.3.6.1.4.1.259.10.1.18.1.23.1.4.1
Entry for SNTP servers.
Indexes
sntpServerIndex
Column Syntax OID
sntpServerIndex
The index of a server. This table has fixed size.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.259.10.1.18.1.23.1.4.1.1
sntpServerIpAddress
The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.18.1.23.1.4.1.2

ntpServerTable

table
.1.3.6.1.4.1.259.10.1.18.1.23.5.5 · 1 row entry · 4 columns
Open in standard view 
Table for NTP servers
ntpServerEntry entry .1.3.6.1.4.1.259.10.1.18.1.23.5.5.1
Entry for NTP servers.
Indexes
ntpServerIpAddress
Column Syntax OID
ntpServerIpAddress
The IP address of a server. Valid IP addresses
must occupy contiguous indexes.
All IP addresses after the last valid index is 0.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.259.10.1.18.1.23.5.5.1.1
ntpServerVersion
NTP version.
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.259.10.1.18.1.23.5.5.1.2
ntpServerKeyId
Key for a NTP server. This variable can only be written.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.259.10.1.18.1.23.5.5.1.3
ntpServerStatus
The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…
Enumerationr/w
Enumerated Values:
1create
2active
3destroy
 .1.3.6.1.4.1.259.10.1.18.1.23.5.5.1.4

ntpAuthKeyTable

table
.1.3.6.1.4.1.259.10.1.18.1.23.5.6 · 1 row entry · 3 columns
Open in standard view 
Table for NTP Authentication keys
ntpAuthKeyEntry entry .1.3.6.1.4.1.259.10.1.18.1.23.5.6.1
Entry for NTP Authentication keys.
Indexes
ntpAuthKeyId
Column Syntax OID
ntpAuthKeyId
The index of a Authentication key. This table has fixed size.
Integer32
Constraints:
range: 1-65536
 .1.3.6.1.4.1.259.10.1.18.1.23.5.6.1.1
ntpAuthKeyWord
The Authentication key word is used to created a key by the MD5
And the max length is 32.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.259.10.1.18.1.23.5.6.1.2
ntpAuthKeyStatus
The status of this conceptual row entry. This object isused to manage the
creation and deletion of conceptual rows.

The status column has six defined values:

- 'active', which indicate…
Enumerationr/w
Enumerated Values:
1create
2active
3destroy
 .1.3.6.1.4.1.259.10.1.18.1.23.5.6.1.3