dellLanFileActionSourceFile

Dell-LAN-SYSMNG-MIB · .1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.2
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
The source file may be specified using a URL addressing scheme.
The format of this address are as follows:
- flash://filename        => indicate a file on the flash 
                             file system.
- filename                => indicates a file on the flash 
                             file system.
- tftp://IPaddr/filename  => indicates a file on a remote tftp
                             server at the host given by 'IPaddr'.
                             The filename in this case may be
                             specified with a full path.
- startup-config          => a special file name indicating the
                             startup configuration.  NOTE that
                             this file CANNOT be renamed.
- running-config          => a special file name indicating the
                             running configuration.  NOTE that
                             this file CANNOT be renamed or 
                             deleted. 
- image                   => a special file name indicating the
                             current active image.  This allows
                             you to copy the current active image
                             without having to know the actual
                             file name of the active image.

Context

MIB
Dell-LAN-SYSMNG-MIB
OID
.1.3.6.1.4.1.674.10895.5000.1.2.2.4.1.2
Type
column
Access
readwrite
Status
current
Parent
dellLanFileActionEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'Dell-LAN-SYSMNG-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Dell-LAN-SYSMNG-MIB::dellLanFileActionSourceFile'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'Dell-LAN-SYSMNG-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'Dell-LAN-SYSMNG-MIB::dellLanFileActionSourceFile.<dellLanFileActionIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'Dell-LAN-SYSMNG-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'Dell-LAN-SYSMNG-MIB::dellLanFileActionSourceFile'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255