t1e1RASStatus
DS8200v2-MIB ·
.1.3.6.1.4.1.321.100.2.3.2.1.38
Object
column
Enumeration
Reports if a Remote (Yellow) Alarm condition exists.
Context
- MIB
- DS8200v2-MIB
- OID
.1.3.6.1.4.1.321.100.2.3.2.1.38- Type
- column
- Access
- readonly
- Status
- current
- Parent
- t1e1AlarmTableEntry
- Table
- t1e1AlarmTable
- Siblings
- 42
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | t1e1RASStatusOther |
2 | t1e1RASStatusNoRAS |
3 | t1e1RASStatusRAS |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| t1e1AlarmNearIndex Selects the near device. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.1 |
| t1e1SESStatus Reports if a Severely Errored condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.10 |
| t1e1SESCount This count contains the number of consecutive seconds a Severely Errored condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.11 |
| t1e1SESThreshold Sets the Severely Errored seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.12 |
| t1e1SESAlarm This status indicates if the Severely Errors Seconds threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.13 |
| t1e1LOSSStatus Reports if a Loss of Signal condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.14 |
| t1e1LOSSCount This count contains the number of consecutive seconds a Loss of Signal condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.15 |
| t1e1LOSSThreshold Sets the Loss of Signal seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.16 |
| t1e1LOSSAlarm This status indicates if the Loss of Signal Seconds threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.17 |
| t1e1UASStatus Reports if an Unavailable condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.18 |
| t1e1UASCount This count contains the number of consecutive seconds an Unavailable condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.19 |
| t1e1AlarmFarIndex Selects the far device. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.2 |
| t1e1UASThreshold Sets the unavailable seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.20 |
| t1e1UASAlarm This status indicates if the Unavailable Seconds threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.21 |
| t1e1CSSStatus Reports if a Controlled Slip condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.22 |
| t1e1CSSCount This count contains the number of consecutive seconds in which at least one Controlled Slip occurred. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.23 |
| t1e1CSSThreshold Sets the Controlled Slip seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.24 |
| t1e1CSSAlarm This status indicates if the Controlled Slip seconds threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.25 |
| t1e1BPVSStatus Reports if a Bipolar Violation Error condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.26 |
| t1e1BPVSCount This count contains the number of consecutive seconds a Bipolar Violation Error condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.27 |
| t1e1BPVSThreshold Sets the Bipolar Violation Error seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.28 |
| t1e1BPVSAlarm This status indicates if the Bipolar Violation Error seconds threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.29 |
| t1e1AlarmIndex This object is the index into the t1e1Table. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.3 |
| t1e1OOFSStatus Indicates that the unit is unable to synchronize on the incoming framing pattern. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.30 |
| t1e1OOFSCount This count contains the number of consecutive seconds an OOF condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.31 |
| t1e1OOFSThreshold Sets the OOF seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.32 |
| t1e1OOFSAlarm Indicates if an OOF seconds alarm condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.33 |
| t1e1AISStatus Indicates that the unit is receiving an unframed all ones pattern. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.34 |
| t1e1AISCount This count contains the number of consecutive seconds an Unframed All Ones condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.35 |
| t1e1AISThreshold Sets the AIS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.36 |
| t1e1AISAlarm Indicates if an Unframed All Ones alarm condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.37 |
| t1e1RASCount This count contains the number of consecutive seconds a Remote (Yellow) Alarm condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.39 |
| t1e1StatusSummary This object provides a summary of the port status. | column | OctetString | .1.3.6.1.4.1.321.100.2.3.2.1.4 |
| t1e1RASThreshold Sets the RAS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.40 |
| t1e1RASAlarm This status indicates if a Remote (Yellow) Alarm exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.41 |
| t1e1AlarmResetTimer Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.42 |
| t1e1AlarmReset This is used to clear the current alarm counts. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.43 |
| t1e1AlarmSummary This object provides a summary of the port alarms. | column | OctetString | .1.3.6.1.4.1.321.100.2.3.2.1.5 |
| t1e1ESStatus Reports if an Errored Second condition exists. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.6 |
| t1e1ESCount This count contains the number of consecutive seconds an Errored Second condition has existed. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.7 |
| t1e1ESThreshold Sets the Errored Seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.2.1.8 |
| t1e1ESAlarm This status indicates if the Errors Seconds threshold is exceeded. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.2.1.9 |