DS8200v2-MIB Table View

The Management Ports table.

mgmtPortsTableEntry row .1.3.6.1.4.1.321.100.2.1.1.1

An entry in the Management Ports table.

Indexes

mgmtPortsTableIndex

Column	Syntax	OID
mgmtPortsTableIndex The index into the Management Ports table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.1.1.1.1
mgmtPortsDescription Contains a textual description of the port.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.1.1.1.2
mgmtPortsElementID This object signifies the name of the device.	OctetStringr/w Constraints: range: 0-27	.1.3.6.1.4.1.321.100.2.1.1.1.3
mgmtPortsMode This object signifies the method used by the port to report alarms.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 coadial 4 coadirect 5 extAlarmOnOpen 6 extAlarmOnClosed 7 slipdial 8 slipdirect	.1.3.6.1.4.1.321.100.2.1.1.1.4
mgmtPortsDialPrefix This object contains the dial string prefix for a modem connected to the port.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.321.100.2.1.1.1.5
mgmtPortsPrimaryDialString This object contains the primary dial string for a modem connected to the port.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.321.100.2.1.1.1.6
mgmtPortsSecondaryDialString This object contains the secondary dial string for a modem connected to the port.	OctetStringr/w Constraints: range: 0-30	.1.3.6.1.4.1.321.100.2.1.1.1.7
mgmtPortsExtInitString This object contains the init string for a modem connected to the port.	OctetStringr/w Constraints: range: 0-38	.1.3.6.1.4.1.321.100.2.1.1.1.8
mgmtPortsCompressedSlip This object specifies if SLIP compression is to be used.	Enumerationr/w Enumerated Values: 1 other 2 enabled 3 disabled 4 auto	.1.3.6.1.4.1.321.100.2.1.1.1.9
mgmtPortsInternalModem This object signifies if the internal modem (when present) is enabled.	Enumerationr/w Enumerated Values: 1 other 2 notPresent 3 enabled 4 disabled	.1.3.6.1.4.1.321.100.2.1.1.1.10

The Dial Backup Configuration Table.

dbuConfigTableEntry row .1.3.6.1.4.1.321.100.2.2.1.1

An entry in the Dial Backup Configuration table.

Indexes

dbuNearIndex dbuFarIndex dbuConfigTableIndex

Column	Syntax	OID
dbuNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.1.1.1
dbuFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.1.1.2
dbuConfigTableIndex The index into the Dial Backup table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.1.1.3
dbuDescription Contains a textual description of the dbu.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.2.1.1.4
dbuRate This object is the identifier of the current DDS DBU rate. The values mean: dbuRate2400 the DBU interface is operating at 2400bps dbuRate4800 the DBU interface is operating at 4800bps dbuRate9600 the DBU interface is op…	Enumerationr/w Enumerated Values: 1 dbuRateOther 2 dbuRate2400 3 dbuRate4800 4 dbuRate9600 5 dbuRate19200 6 dbuRate38400 7 dbuRate56000 8 dbuRate57600 9 dbuRate64000	.1.3.6.1.4.1.321.100.2.2.1.1.5
dbuMode This object is the identifier of the current mode that the Dial Backup Unit is operating in. The values mean: dbuModeOrig The dial backup unit is operating in the originate mode dbuModeAnsw The dial backup unit is opera…	Enumerationr/w Enumerated Values: 1 dbuModeOther 2 dbuModeOrig 3 dbuModeAnsw 4 dbuModeNotAvail 5 dbuModeCallbackOrig 6 dbuModeCallbackAnsw 7 dbuModeMaster 8 dbuModeSlave	.1.3.6.1.4.1.321.100.2.2.1.1.6
dbuFormat This object is the identifier of the current format that the Dial Backup Unit is operating in. The values mean: dbuFormatSync The dial backup unit is operating in the synchronous format dbuFormatAsync The dial backup un…	Enumerationr/w Enumerated Values: 1 dbuFormatOther 2 dbuFormatSync 3 dbuFormatAsync 4 dbuFormatNotAvail	.1.3.6.1.4.1.321.100.2.2.1.1.7
dbuNumber This string is the currently programmed number for the dial backup unit to call	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.321.100.2.2.1.1.8
dbuStatus This object is the identifier of the current Dial Backup Unit operating status. The values mean: dbuStatusDisabled The dial backup unit is either not installed or disabled dbuStatusEnabled The dial backup unit is instal…	Enumeration Enumerated Values: 1 dbuStatusOther 2 dbuStatusDisabled 3 dbuStatusEnabled 4 dbuStatusActive 5 dbuStatusLocked 6 dbuStatusConnecting 7 dbuStatusDisallowed 8 dbuStatusAwaitingCall 9 dbuStatusDialing 10 dbuStatusDisconnecting 11 dbuStatusTesting 12 dbuStatusTestPassed 13 dbuStatusTestFailed	.1.3.6.1.4.1.321.100.2.2.1.1.9
dbuCommand This object is the identifier of the current setting that the Dial Backup Unit is operating in. The values mean: dbuCommandDisable The dial backup unit is not to operate dbuCommandEnable The dial backup unit is to opera…	Enumerationr/w Enumerated Values: 1 dbuCommandOther 2 dbuCommandDisable 3 dbuCommandEnable 4 dbuCommandActivate 5 dbuCommandLock 6 dbuCommandEnableDaily 7 dbuCommandTest	.1.3.6.1.4.1.321.100.2.2.1.1.10
dbuActivator1 This object is the identifier of the current trigger that will activate the Dial Backup Unit. The values mean: dbuActivatorLOS The dial backup unit is activated by a LOS alarm condition dbuActivatorOOS The dial backup u…	Enumerationr/w Enumerated Values: 1 dbuActivatorOther 2 dbuActivatorLOS 3 dbuActivatorOOS 4 dbuActivatorOOF 5 dbuActivatorAny 6 dbuActivatorES 7 dbuActivatorSES 8 dbuActivatorUAS 9 dbuActivatorLOF 10 dbuActivatorRAS 11 dbuActivatorAIS 12 dbuActivatorBPV	.1.3.6.1.4.1.321.100.2.2.1.1.11
dbuActivator2 This object is the identifier of the current trigger that will activate the Dial Backup Unit. The values mean: dbuActivatorLOS The dial backup unit is activated by a LOS alarm condition dbuActivatorOOS The dial backup u…	Enumerationr/w Enumerated Values: 1 dbuActivatorOther 2 dbuActivatorLOS 3 dbuActivatorOOS 4 dbuActivatorOOF 5 dbuActivatorAny 6 dbuActivatorES 7 dbuActivatorSES 8 dbuActivatorUAS 9 dbuActivatorLOF 10 dbuActivatorRAS 11 dbuActivatorAIS 12 dbuActivatorBPV	.1.3.6.1.4.1.321.100.2.2.1.1.12
dbuDialStr This string is the dial string sent to the dial backup unit during every connection attempt	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.321.100.2.2.1.1.13
dbuInitStr This string is the initialization string sent to the dial backup unit before every connection attempt	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.321.100.2.2.1.1.14
dbuHangupStr This string is the hangup command string sent to the dial backup unit after every successful call	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.321.100.2.2.1.1.15
dbuPasswordStr This string is the prompt character and password string for the dial backup unit in Callback DBU	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.321.100.2.2.1.1.16
dbuSecurity Enables security on dial backup unit.	Enumerationr/w Enumerated Values: 1 dbuSecurityOther 2 dbuSecurityDisable 3 dbuSecurityEnable	.1.3.6.1.4.1.321.100.2.2.1.1.17
dbuDtrDial Enables DTR dial feature on dial backup unit.	Enumerationr/w Enumerated Values: 1 dbuDtrDialOther 2 dbuDtrDialDisable 3 dbuDtrDialEnable	.1.3.6.1.4.1.321.100.2.2.1.1.18
dbuISDNSwitchType Specifies the switch type for the ISDN DBU.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.1.1.19
dbuISDNSwitchVersion Specifies the switch version for the ISDN DBU.	Enumerationr/w Enumerated Values: 1 dbuISDNSwitchVersionOther 2 dbuISDNSwitchVersionNational1 3 dbuISDNSwitchVersionATTP2P 4 dbuISDNSwitchVersionATTMP 5 dbuISDNSwitchVersionDMS100PVCIC0 6 dbuISDNSwitchVersionDMS100PVCIC1	.1.3.6.1.4.1.321.100.2.2.1.1.20
dbuISDNTEI Specifies the ISDN DBU TEI.	Enumerationr/w Enumerated Values: 1 dbuISDNTEIOther 2 dbuISDNTEIDisable 3 dbuISDNTEIAuto 4 dbuISDNTEI0 5 dbuISDNTEI1 6 dbuISDNTEI2 7 dbuISDNTEI3 8 dbuISDNTEI4 9 dbuISDNTEI5 10 dbuISDNTEI6 11 dbuISDNTEI7 12 dbuISDNTEI8 13 dbuISDNTEI9 14 dbuISDNTEI10 15 dbuISDNTEI11 16 dbuISDNTEI12 17 dbuISDNTEI13 18 dbuISDNTEI14 19 dbuISDNTEI15 20 dbuISDNTEI16 21 dbuISDNTEI17 22 dbuISDNTEI18 23 dbuISDNTEI19 24 dbuISDNTEI20 25 dbuISDNTEI21 26 dbuISDNTEI22 27 dbuISDNTEI23 28 dbuISDNTEI24 29 dbuISDNTEI25 30 dbuISDNTEI26 31 dbuISDNTEI27 32 dbuISDNTEI28 33 dbuISDNTEI29 34 dbuISDNTEI30 35 dbuISDNTEI31 36 dbuISDNTEI32 37 dbuISDNTEI33 38 dbuISDNTEI34 39 dbuISDNTEI35 40 dbuISDNTEI36 41 dbuISDNTEI37 42 dbuISDNTEI38 43 dbuISDNTEI39 44 dbuISDNTEI40 45 dbuISDNTEI41 46 dbuISDNTEI42 47 dbuISDNTEI43 48 dbuISDNTEI44 49 dbuISDNTEI45 50 dbuISDNTEI46 51 dbuISDNTEI47 52 dbuISDNTEI48 53 dbuISDNTEI49 54 dbuISDNTEI50 55 dbuISDNTEI51 56 dbuISDNTEI52 57 dbuISDNTEI53 58 dbuISDNTEI54 59 dbuISDNTEI55 60 dbuISDNTEI56 61 dbuISDNTEI57 62 dbuISDNTEI58 63 dbuISDNTEI59 64 dbuISDNTEI60 65 dbuISDNTEI61 66 dbuISDNTEI62 67 dbuISDNTEI63	.1.3.6.1.4.1.321.100.2.2.1.1.21
dbuISDNSPID Specifies the SPID for the ISDN DBU.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.321.100.2.2.1.1.22
dbuISDNDDNUM Specifies the Data Directory Number for the ISDN DBU.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.321.100.2.2.1.1.23

A table of COLD START reprogramming strings for the dial backup unit.

dbuResetStringsEntry row .1.3.6.1.4.1.321.100.2.2.2.1

An entry in the dbuResetStringsTable.

Indexes

dbuResetNearIndex dbuResetFarIndex dbuResetConfigEntryIndex dbuResetStringsIndex

Column	Syntax	OID
dbuResetNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.2.1.1
dbuResetFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.2.1.2
dbuResetConfigEntryIndex The index into the Dial Backup table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.2.1.3
dbuResetStringsIndex The index into the dbuResetStringsTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.2.1.4
dbuResetString This string is one of the dial backup unit's COLD START reprogramming strings	OctetStringr/w Constraints: range: 0-50	.1.3.6.1.4.1.321.100.2.2.2.1.5

The Dial Backup StartStop Table.

dbuStartStopTableEntry row .1.3.6.1.4.1.321.100.2.2.3.1

An entry in the Dial Backup Start Stop table.

Indexes

dbuStartStopNearIndex dbuStartStopFarIndex dbuStartStopConfigEntryIndex dbuStartStopDayOfWeek

Column	Syntax	OID
dbuStartStopNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.3.1.1
dbuStartStopFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.3.1.2
dbuStartStopConfigEntryIndex The index into the Dial Backup table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.2.3.1.3
dbuStartStopDayOfWeek The index into the Dial Backup Start Stop times table.	Enumeration Enumerated Values: 1 dbuStartStopSunday 2 dbuStartStopMonday 3 dbuStartStopTuesday 4 dbuStartStopWednesday 5 dbuStartStopThursday 6 dbuStartStopFriday 7 dbuStartStopSaturday	.1.3.6.1.4.1.321.100.2.2.3.1.4
dbuStart This object is the beginning of an allowable window for Dial Backup Activation.	Enumerationr/w Enumerated Values: 1 dbuStartHour00 2 dbuStartHour01 3 dbuStartHour02 4 dbuStartHour03 5 dbuStartHour04 6 dbuStartHour05 7 dbuStartHour06 8 dbuStartHour07 9 dbuStartHour08 10 dbuStartHour09 11 dbuStartHour10 12 dbuStartHour11 13 dbuStartHour12 14 dbuStartHour13 15 dbuStartHour14 16 dbuStartHour15 17 dbuStartHour16 18 dbuStartHour17 19 dbuStartHour18 20 dbuStartHour19 21 dbuStartHour20 22 dbuStartHour21 23 dbuStartHour22 24 dbuStartHour23	.1.3.6.1.4.1.321.100.2.2.3.1.5
dbuStop This object is the end of an allowable window for Dial Backup Activation.	Enumerationr/w Enumerated Values: 1 dbuStopHour00 2 dbuStopHour01 3 dbuStopHour02 4 dbuStopHour03 5 dbuStopHour04 6 dbuStopHour05 7 dbuStopHour06 8 dbuStopHour07 9 dbuStopHour08 10 dbuStopHour09 11 dbuStopHour10 12 dbuStopHour11 13 dbuStopHour12 14 dbuStopHour13 15 dbuStopHour14 16 dbuStopHour15 17 dbuStopHour16 18 dbuStopHour17 19 dbuStopHour18 20 dbuStopHour19 21 dbuStopHour20 22 dbuStopHour21 23 dbuStopHour22 24 dbuStopHour23	.1.3.6.1.4.1.321.100.2.2.3.1.6

The T1 and E1 Configuration Table.

t1e1ConfigTableEntry row .1.3.6.1.4.1.321.100.2.3.1.1

An entry in the t1e1Table.

Indexes

t1e1ConfigNearIndex t1e1ConfigFarIndex t1e1ConfigIndex

Column	Syntax	OID
t1e1ConfigNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.1.1.1
t1e1ConfigFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.1.1.2
t1e1ConfigIndex This object is the index into the t1e1Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.1.1.3
t1e1Description Contains a textual description of the port.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.3.1.1.4
t1e1Mode This object identifies the port as either a Network (long-haul) or DTE (short-haul) port.	Enumerationr/w Enumerated Values: 1 t1e1ModeOther 2 t1e1ModeDTE 3 t1e1ModeNetwork	.1.3.6.1.4.1.321.100.2.3.1.1.5
t1e1FrameType Selects the framing for the network side of the DSU/CSU.	Enumerationr/w Enumerated Values: 1 t1e1FrameTypeOther 2 t1e1FrameTypeESF 3 t1e1FrameTypeD4 4 t1e1FrameTypeCCSCRC 5 t1e1FrameTypeCCS 6 t1e1FrameTypeCAS 7 t1e1FrameTypeCASCRC 8 t1e1FrameTypeUnframed 9 t1e1FrameTypeV3 10 t1e1FrameTypeT1Unframed	.1.3.6.1.4.1.321.100.2.3.1.1.6
t1e1LineCode Selects the network side line coding.	Enumerationr/w Enumerated Values: 1 t1e1LineCodeOther 2 t1e1LineCodeAMI 3 t1e1LineCodeB8ZS 4 t1e1LineCodeHDB3	.1.3.6.1.4.1.321.100.2.3.1.1.7
t1e1LineBuildOut Selects the line build out for the network interface. The options are: t1e1LineBuildOut0db indicates a line build out of 0db t1e1LineBuildOut75db indicates a line build out of -7.5db t1e1LineBuildOut15db indic…	Enumerationr/w Enumerated Values: 1 t1e1LineBuildOutOther 2 t1e1LineBuildOut0db 3 t1e1LineBuildOut75db 4 t1e1LineBuildOut15db 5 t1e1LineBuildOut225db	.1.3.6.1.4.1.321.100.2.3.1.1.8
t1e1Timing Sets the timing source to synchronize the unit's internal timing generators.	Enumerationr/w Enumerated Values: 1 t1e1TimingOther 2 t1e1TimingInternal 3 t1e1TimingNetwork 4 t1e1TimingT1DTE 5 t1e1TimingStation 6 t1e1TimingStaClock 7 t1e1TimingPort1 8 t1e1TimingPort2 9 t1e1TimingPort3 10 t1e1TimingPort4 11 t1e1TimingPort5 12 t1e1TimingPort6 13 t1e1TimingPort7 14 t1e1TimingPort8 15 t1e1TimingPort9 16 t1e1TimingPort10 17 t1e1TimingPort11 18 t1e1TimingPort12 19 t1e1TimingPort13 20 t1e1TimingPort14 21 t1e1TimingPort15 22 t1e1TimingPort16 23 t1e1TimingPort17 24 t1e1TimingPort18 25 t1e1TimingPort19 26 t1e1TimingPort20 27 t1e1TimingPort21 28 t1e1TimingPort22 29 t1e1TimingPort23 30 t1e1TimingPort24 31 t1e1TimingPort25 32 t1e1TimingPort26 33 t1e1TimingPort27 34 t1e1TimingPort28 35 t1e1TimingPort29 36 t1e1TimingPort30 37 t1e1TimingPort31 38 t1e1TimingPort32 39 t1e1TimingSlot2PortA 40 t1e1TimingSlot2PortB 41 t1e1TimingSlot3PortA 42 t1e1TimingSlot3PortB 43 t1e1TimingSlot4PortA 44 t1e1TimingSlot4PortB 45 t1e1TimingSlot5PortA 46 t1e1TimingSlot5PortB 47 t1e1TimingSlot6PortA 48 t1e1TimingSlot6PortB 49 t1e1TimingSlot2Dsu1PortA 50 t1e1TimingSlot2Dsu1PortB 51 t1e1TimingSlot2Dsu2PortA 52 t1e1TimingSlot2Dsu2PortB 53 t1e1TimingSlot2Dsu3PortA 54 t1e1TimingSlot2Dsu3PortB 55 t1e1TimingSlot2Dsu4PortA 56 t1e1TimingSlot2Dsu4PortB 57 t1e1TimingSlot2Dsu5PortA 58 t1e1TimingSlot2Dsu5PortB 59 t1e1TimingSlot2Dsu6PortA 60 t1e1TimingSlot2Dsu6PortB 61 t1e1TimingSlot3Dsu1PortA 62 t1e1TimingSlot3Dsu1PortB 63 t1e1TimingSlot3Dsu2PortA 64 t1e1TimingSlot3Dsu2PortB 65 t1e1TimingSlot3Dsu3PortA 66 t1e1TimingSlot3Dsu3PortB 67 t1e1TimingSlot3Dsu4PortA 68 t1e1TimingSlot3Dsu4PortB 69 t1e1TimingSlot3Dsu5PortA 70 t1e1TimingSlot3Dsu5PortB 71 t1e1TimingSlot3Dsu6PortA 72 t1e1TimingSlot3Dsu6PortB 73 t1e1TimingSlot4Dsu1PortA 74 t1e1TimingSlot4Dsu1PortB 75 t1e1TimingSlot4Dsu2PortA 76 t1e1TimingSlot4Dsu2PortB 77 t1e1TimingSlot4Dsu3PortA 78 t1e1TimingSlot4Dsu3PortB 79 t1e1TimingSlot4Dsu4PortA 80 t1e1TimingSlot4Dsu4PortB 81 t1e1TimingSlot4Dsu5PortA 82 t1e1TimingSlot4Dsu5PortB 83 t1e1TimingSlot4Dsu6PortA 84 t1e1TimingSlot4Dsu6PortB 85 t1e1TimingSlot5Dsu1PortA 86 t1e1TimingSlot5Dsu1PortB 87 t1e1TimingSlot5Dsu2PortA 88 t1e1TimingSlot5Dsu2PortB 89 t1e1TimingSlot5Dsu3PortA 90 t1e1TimingSlot5Dsu3PortB 91 t1e1TimingSlot5Dsu4PortA 92 t1e1TimingSlot5Dsu4PortB 93 t1e1TimingSlot5Dsu5PortA 94 t1e1TimingSlot5Dsu5PortB 95 t1e1TimingSlot5Dsu6PortA 96 t1e1TimingSlot5Dsu6PortB 97 t1e1TimingSlot6Dsu1PortA 98 t1e1TimingSlot6Dsu1PortB 99 t1e1TimingSlot6Dsu2PortA 100 t1e1TimingSlot6Dsu2PortB 101 t1e1TimingSlot6Dsu3PortA 102 t1e1TimingSlot6Dsu3PortB 103 t1e1TimingSlot6Dsu4PortA 104 t1e1TimingSlot6Dsu4PortB 105 t1e1TimingSlot6Dsu5PortA 106 t1e1TimingSlot6Dsu5PortB 107 t1e1TimingSlot6Dsu6PortA 108 t1e1TimingSlot6Dsu6PortB	.1.3.6.1.4.1.321.100.2.3.1.1.9
t1e1StationInTiming Selects the input timing if t1e1Timing is set to Station.	Enumerationr/w Enumerated Values: 1 t1e1StationInTimingOther 2 t1e1StationInTimingNX56 3 t1e1StationInTimingNX64 4 t1e1StationInTiming1544 5 t1e1StationInTiming2048	.1.3.6.1.4.1.321.100.2.3.1.1.10
t1e1StationTiming Selects the N-multiple when Station Input Timing is set to either NX56 or NX65. The N range is 1..24	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.1.1.11
t1e1PRM Enables the ANSI T1.403 Performance Report Message functions.	Enumerationr/w Enumerated Values: 1 t1e1PRMOther 2 t1e1PRMDisable 3 t1e1PRMEnable	.1.3.6.1.4.1.321.100.2.3.1.1.12
t1e1ZeroSuppress Determines whether ones density insertion is activated after 15 zeros . To ensure compliance with TR54016, this field must be enabled.	Enumerationr/w Enumerated Values: 1 t1e1ZeroOther 2 t1e1ZeroDisable 3 t1e1ZeroEnable	.1.3.6.1.4.1.321.100.2.3.1.1.13
t1e1NationalBit Selects a national bit to create a 4-kbps datalink between the endpoint units.	Enumerationr/w Enumerated Values: 1 t1e1NationalOther 2 t1e1NationalNone 3 t1e1NationalSA4 4 t1e1NationalSA5 5 t1e1NationalSA6 6 t1e1NationalSA7 7 t1e1NationalSA8	.1.3.6.1.4.1.321.100.2.3.1.1.14
t1e1KeepAlive Selects keep alive framed and unframed ones when the unit detects LOS or OOF.	Enumerationr/w Enumerated Values: 1 t1e1KeepAliveOther 2 t1e1KeepAliveUnframedOnes 3 t1e1KeepAliveFramedOnes 4 t1e1KeepAliveLoop	.1.3.6.1.4.1.321.100.2.3.1.1.15
t1e1CRC4Mode Selects whether CRC4 is enabled or disabled.	Enumerationr/w Enumerated Values: 1 t1e1CRC4Other 2 t1e1CRC4Disabled 3 t1e1CRC4Enabled	.1.3.6.1.4.1.321.100.2.3.1.1.16
t1e1DSXLevel Selects the DSX1 interface output level.	Enumerationr/w Enumerated Values: 1 t1e1DSXOther 2 t1e1DSX0110 3 t1e1DSX111220 4 t1e1DSX221330 5 t1e1DSX331440 6 t1e1DSX441550 7 t1e1DSX551660 8 t1e1DSX661up	.1.3.6.1.4.1.321.100.2.3.1.1.17
t1e1CRC Determines whether received CRC data is passed through or regenerated.	Enumerationr/w Enumerated Values: 1 t1e1CRCOther 2 t1e1CRCPass 3 t1e1CRCRegenerate	.1.3.6.1.4.1.321.100.2.3.1.1.18
t1e1FDLPassThrough Determines whether the ESF FDL passes through the CSU or terminates.	Enumerationr/w Enumerated Values: 1 t1e1FDLPassThroughOther 2 t1e1FDLPassThroughPass 3 t1e1FDLPassThroughTerminate	.1.3.6.1.4.1.321.100.2.3.1.1.19
t1e1AudibleAlarm If applicable, Enables or Disables the CSU's internal buzzer which alerts users of an alarm condition.	Enumerationr/w Enumerated Values: 1 t1e1AudibleAlarmOther 2 t1e1AudibleAlarmDisabled 3 t1e1AudibleAlarmEnabled	.1.3.6.1.4.1.321.100.2.3.1.1.20
t1e1Function Specifies the function the network port will perform in the unit. The options are: t1e1FunctionNetwork (Independent network port) t1e1FunctionSlaved (Slaved to another network port) t1e1FunctionBackup (Automatic Pr…	Enumerationr/w Enumerated Values: 1 t1e1FunctionOther 2 t1e1FunctionNetwork 3 t1e1FunctionSlaved 4 t1e1FunctionBackup	.1.3.6.1.4.1.321.100.2.3.1.1.21
t1e1EBitGeneration	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.321.100.2.3.1.1.22
t1e1RAIGeneration	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.321.100.2.3.1.1.23
t1e1SpareBitInsertion	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.321.100.2.3.1.1.24
t1e1Sa4In	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.25
t1e1Sa5In	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.26
t1e1Sa6In	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.27
t1e1Sa7In	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.28
t1e1Sa8In	OctetString Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.29
t1e1Sa4Out	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.30
t1e1Sa5Out	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.31
t1e1Sa6Out	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.32
t1e1Sa7Out	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.33
t1e1Sa8Out	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.321.100.2.3.1.1.34

The T1 and E1 Alarm Table.

t1e1AlarmTableEntry row .1.3.6.1.4.1.321.100.2.3.2.1

An entry in the t1e1Table.

Indexes

t1e1AlarmNearIndex t1e1AlarmFarIndex t1e1AlarmIndex

Column	Syntax	OID
t1e1AlarmNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.1
t1e1AlarmFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.2
t1e1AlarmIndex This object is the index into the t1e1Table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.3
t1e1StatusSummary This object provides a summary of the port status.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.3.2.1.4
t1e1AlarmSummary This object provides a summary of the port alarms.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.3.2.1.5
t1e1ESStatus Reports if an Errored Second condition exists.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoES 3 t1e1StatusES	.1.3.6.1.4.1.321.100.2.3.2.1.6
t1e1ESCount This count contains the number of consecutive seconds an Errored Second condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.7
t1e1ESThreshold Sets the Errored Seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.8
t1e1ESAlarm This status indicates if the Errors Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 t1e1ESAlarmOther 2 t1e1ESAlarmNone 3 t1e1ESAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.3.2.1.9
t1e1SESStatus Reports if a Severely Errored condition exists.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoSES 3 t1e1StatusSES	.1.3.6.1.4.1.321.100.2.3.2.1.10
t1e1SESCount This count contains the number of consecutive seconds a Severely Errored condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.11
t1e1SESThreshold Sets the Severely Errored seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.12
t1e1SESAlarm This status indicates if the Severely Errors Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 t1e1SESAlarmOther 2 t1e1SESAlarmNone 3 t1e1SESAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.3.2.1.13
t1e1LOSSStatus Reports if a Loss of Signal condition exists.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoLOSS 3 t1e1StatusLOSS	.1.3.6.1.4.1.321.100.2.3.2.1.14
t1e1LOSSCount This count contains the number of consecutive seconds a Loss of Signal condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.15
t1e1LOSSThreshold Sets the Loss of Signal seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.16
t1e1LOSSAlarm This status indicates if the Loss of Signal Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 t1e1LOSSAlarmOther 2 t1e1LOSSAlarmNone 3 t1e1LOSSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.3.2.1.17
t1e1UASStatus Reports if an Unavailable condition exists.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoUAS 3 t1e1StatusUAS	.1.3.6.1.4.1.321.100.2.3.2.1.18
t1e1UASCount This count contains the number of consecutive seconds an Unavailable condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.19
t1e1UASThreshold Sets the unavailable seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.20
t1e1UASAlarm This status indicates if the Unavailable Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 t1e1UASAlarmOther 2 t1e1UASAlarmNone 3 t1e1UASAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.3.2.1.21
t1e1CSSStatus Reports if a Controlled Slip condition exists.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoCSS 3 t1e1StatusCSS	.1.3.6.1.4.1.321.100.2.3.2.1.22
t1e1CSSCount This count contains the number of consecutive seconds in which at least one Controlled Slip occurred.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.23
t1e1CSSThreshold Sets the Controlled Slip seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.24
t1e1CSSAlarm This status indicates if the Controlled Slip seconds threshold is exceeded.	Enumeration Enumerated Values: 1 t1e1CSSAlarmOther 2 t1e1CSSAlarmNone 3 t1e1CSSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.3.2.1.25
t1e1BPVSStatus Reports if a Bipolar Violation Error condition exists.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoBPVS 3 t1e1StatusBPVS	.1.3.6.1.4.1.321.100.2.3.2.1.26
t1e1BPVSCount This count contains the number of consecutive seconds a Bipolar Violation Error condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.27
t1e1BPVSThreshold Sets the Bipolar Violation Error seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.28
t1e1BPVSAlarm This status indicates if the Bipolar Violation Error seconds threshold is exceeded.	Enumeration Enumerated Values: 1 t1e1BPVSAlarmOther 2 t1e1BPVSAlarmNone 3 t1e1BPVSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.3.2.1.29
t1e1OOFSStatus Indicates that the unit is unable to synchronize on the incoming framing pattern.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoOOF 3 t1e1StatusOOF	.1.3.6.1.4.1.321.100.2.3.2.1.30
t1e1OOFSCount This count contains the number of consecutive seconds an OOF condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.31
t1e1OOFSThreshold Sets the OOF seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.32
t1e1OOFSAlarm Indicates if an OOF seconds alarm condition exists.	Enumeration Enumerated Values: 1 t1e1OOFSAlarmOther 2 t1e1OOFSAlarmNone 3 t1e1OOFSAlarmExists	.1.3.6.1.4.1.321.100.2.3.2.1.33
t1e1AISStatus Indicates that the unit is receiving an unframed all ones pattern.	Enumeration Enumerated Values: 1 t1e1StatusOther 2 t1e1StatusNoAIS 3 t1e1StatusAIS	.1.3.6.1.4.1.321.100.2.3.2.1.34
t1e1AISCount This count contains the number of consecutive seconds an Unframed All Ones condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.35
t1e1AISThreshold Sets the AIS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.36
t1e1AISAlarm Indicates if an Unframed All Ones alarm condition exists.	Enumeration Enumerated Values: 1 t1e1AISAlarmOther 2 t1e1AISAlarmNone 3 t1e1AISAlarmExists	.1.3.6.1.4.1.321.100.2.3.2.1.37
t1e1RASStatus Reports if a Remote (Yellow) Alarm condition exists.	Enumeration Enumerated Values: 1 t1e1RASStatusOther 2 t1e1RASStatusNoRAS 3 t1e1RASStatusRAS	.1.3.6.1.4.1.321.100.2.3.2.1.38
t1e1RASCount This count contains the number of consecutive seconds a Remote (Yellow) Alarm condition has existed.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.39
t1e1RASThreshold Sets the RAS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.40
t1e1RASAlarm This status indicates if a Remote (Yellow) Alarm exists.	Enumeration Enumerated Values: 1 t1e1RASAlarmOther 2 t1e1RASAlarmNone 3 t1e1RASAlarmExists	.1.3.6.1.4.1.321.100.2.3.2.1.41
t1e1AlarmResetTimer Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.3.2.1.42
t1e1AlarmReset This is used to clear the current alarm counts.	Enumerationr/w Enumerated Values: 1 t1e1AlarmResetOther 2 t1e1AlarmResetClearAlarms	.1.3.6.1.4.1.321.100.2.3.2.1.43

The dds Network Interface Configuration Table.

ddsNetConfigTableEntry row .1.3.6.1.4.1.321.100.2.4.1.1

An entry in the Network Interface Table.

Indexes

ddsNetConfigNearIndex ddsNetConfigFarIndex ddsNetConfigIndex

Column	Syntax	OID
ddsNetConfigNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.1.1.1
ddsNetConfigFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.1.1.2
ddsNetConfigIndex Index into the ddsNetConfigTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.1.1.3
ddsNetDescription Contains a textual description of the port.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.4.1.1.4
ddsNetRate This object is the identifier of the current DDS network rate. The values mean: ddsNetRate2400 the DDS network interface is operating at 2400bps ddsNetRate4800 the DDS network interface is operating at 4800bps ddsNetRat…	Enumerationr/w Enumerated Values: 1 ddsNetRate2400 2 ddsNetRate4800 3 ddsNetRate9600 4 ddsNetRate19200 5 ddsNetRate38400 6 ddsNetRate56000 7 ddsNetRate64000	.1.3.6.1.4.1.321.100.2.4.1.1.5
ddsNetMode This variable describes mode in which data is being sent from the DDS unit back towards the network. Changing the value of this variable can cause a loss of remote communications. The values mean: ddsNetModeNormal (DDS-…	Enumerationr/w Enumerated Values: 1 ddsNetModeNormal 2 ddsNetModeProprietaryTXPI 3 ddsNetMode64KClearChannel 4 ddsNetMode64KCCProprietaryTXPII	.1.3.6.1.4.1.321.100.2.4.1.1.6
ddsNetTimingSource This variable describes the current timing source for the DDS network interface. The values mean: ddsNetTimingNet unit dependant upon network for DDS network interface timing ddsNetTimingInt unit supplying timing for DD…	Enumerationr/w Enumerated Values: 1 ddsNetTimingNet 2 ddsNetTimingInt 3 ddsNetTimingDTE 4 ddsNetTimingPort1 5 ddsNetTimingPort2	.1.3.6.1.4.1.321.100.2.4.1.1.7
ddsNetRemComm This variable describes the current setting for the remote communications link. The values mean: ddsNetRemCommEnabled remote communications can be carried out end to end ddsNetRemCommDisabled remote communications are n…	Enumeration Enumerated Values: 1 ddsNetRemCommEnabled 2 ddsNetRemCommDisabled 3 ddsNetRemCommNotAvailable	.1.3.6.1.4.1.321.100.2.4.1.1.8
ddsNetCircuitAssur This variable describes the current setting for the circuit assurance option. The values mean: ddsNetCircuitAssurEnabled Circuit Assurance is enabled and the integrity of the DDS loop will be maintained ddsNetCircuitAss…	Enumerationr/w Enumerated Values: 1 ddsNetCircuitAssurEnabled 2 ddsNetCircuitAssurDisabled 3 ddsNetCircuitAssurNotAvailable	.1.3.6.1.4.1.321.100.2.4.1.1.9
ddsNetAntiStrTimer This variable describes the current setting for the anti streaming timer. The values mean: ddsNetAntiStrTimerOff the AntiStreaming Timer is off ddsNetAntiStrTimer10 the AntiStreaming Timer is set to 10 seconds ddsNetAnt…	Enumerationr/w Enumerated Values: 1 ddsNetAntiStrTimerOff 2 ddsNetAntiStrTimer10 3 ddsNetAntiStrTimer30 4 ddsNetAntiStrTimer60	.1.3.6.1.4.1.321.100.2.4.1.1.10

The dds Network Interface Alarm Table.

ddsNetAlarmTableEntry row .1.3.6.1.4.1.321.100.2.4.2.1

An entry in the ddsNetAlarmTable.

Indexes

ddsNetAlarmNearIndex ddsNetAlarmFarIndex ddsNetAlarmIndex

Column	Syntax	OID
ddsNetAlarmNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.1
ddsNetAlarmFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.2
ddsNetAlarmIndex Index into the ddsNetAlarmTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.3
ddsNetStatusSummary This object provides a summary of the port status.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.4.2.1.4
ddsNetAlarmSummary This object provides a summary of the port alarms.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.4.2.1.5
ddsNetLOSStatus Reports if a Loss of Signal condition exists.	Enumeration Enumerated Values: 1 ddsNetStatusLOSOther 2 ddsNetStatusNoLOS 3 ddsNetStatusLOS	.1.3.6.1.4.1.321.100.2.4.2.1.6
ddsNetLOSCount This count contains the number of consecutive seconds the unit received signal has been interrupted.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.7
ddsNetLOSThreshold A period, measured in seconds, in which the DDS received signal is interrupted.	Enumerationr/w Enumerated Values: 1 ddsNetLOSThresholdOther 2 ddsNetLOSThresholdNone 3 ddsNetLOSThreshold1 4 ddsNetLOSThreshold2 5 ddsNetLOSThreshold3 6 ddsNetLOSThreshold4 7 ddsNetLOSThreshold5 8 ddsNetLOSThreshold10 9 ddsNetLOSThreshold20 10 ddsNetLOSThreshold30	.1.3.6.1.4.1.321.100.2.4.2.1.8
ddsNetLOSAlarm This status indicates if the Loss of Signal Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 ddsNetLOSAlarmOther 2 ddsNetLOSAlarmNone 3 ddsNetLOSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.4.2.1.9
ddsNetOOFStatus Reports if an Out of Frame condition exists.	Enumeration Enumerated Values: 1 ddsNetStatusOOFOther 2 ddsNetStatusNoOOF 3 ddsNetStatusOOF	.1.3.6.1.4.1.321.100.2.4.2.1.10
ddsNetOOFCount This count contains the number of consecutive seconds the unit has received the out of frame code.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.11
ddsNetOOFThreshold A period, measured in seconds, in which the Out Of Frame code is received or a frame sync loss occurred.	Enumerationr/w Enumerated Values: 1 ddsNetOOFThresholdOther 2 ddsNetOOFThresholdNone 3 ddsNetOOFThreshold1 4 ddsNetOOFThreshold2 5 ddsNetOOFThreshold3 6 ddsNetOOFThreshold4 7 ddsNetOOFThreshold5 8 ddsNetOOFThreshold10 9 ddsNetOOFThreshold20 10 ddsNetOOFThreshold30	.1.3.6.1.4.1.321.100.2.4.2.1.12
ddsNetOOFAlarm This status indicates if the Out of Frame Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 ddsNetOOFSAlarmOther 2 ddsNetOOFSAlarmNone 3 ddsNetOOFSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.4.2.1.13
ddsNetOOSStatus Reports if Out of Service codes are received.	Enumeration Enumerated Values: 1 ddsNetStatusOOSOther 2 ddsNetStatusNoOOS 3 ddsNetStatusOOS	.1.3.6.1.4.1.321.100.2.4.2.1.14
ddsNetOOSCount This count contains the number of consecutive seconds the unit has received the out of service code.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.15
ddsNetOOSThreshold A period, measured in seconds, in which the Out Of Service code is received.	Enumerationr/w Enumerated Values: 1 ddsNetOOSThresholdOther 2 ddsNetOOSThresholdNone 3 ddsNetOOSThreshold1 4 ddsNetOOSThreshold2 5 ddsNetOOSThreshold3 6 ddsNetOOSThreshold4 7 ddsNetOOSThreshold5 8 ddsNetOOSThreshold10 9 ddsNetOOSThreshold20 10 ddsNetOOSThreshold30	.1.3.6.1.4.1.321.100.2.4.2.1.16
ddsNetOOSAlarm This status indicates if the Out of Service Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 ddsNetOOSAlarmOther 2 ddsNetOOSAlarmNone 3 ddsNetOOSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.4.2.1.17
ddsNetFDLStatus Reports if Facility Data Link errors have occurred.	Enumeration Enumerated Values: 1 ddsNetStatusFDLOther 2 ddsNetStatusNoFDL 3 ddsNetStatusFDL	.1.3.6.1.4.1.321.100.2.4.2.1.18
ddsNetFDLCount This count contains the number of consecutive seconds in which FDL errors have occurred.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.19
ddsNetFDLThreshold A period, measured in seconds, in which FDL errors have occurred.	Enumerationr/w Enumerated Values: 1 ddsNetFDLThresholdOther 2 ddsNetFDLThresholdNone 3 ddsNetFDLThreshold1 4 ddsNetFDLThreshold2 5 ddsNetFDLThreshold3 6 ddsNetFDLThreshold4 7 ddsNetFDLThreshold5 8 ddsNetFDLThreshold10 9 ddsNetFDLThreshold20 10 ddsNetFDLThreshold30	.1.3.6.1.4.1.321.100.2.4.2.1.20
ddsNetFDLAlarm This status indicates if the Facility Data Link threshold is exceeded.	Enumeration Enumerated Values: 1 ddsNetFDLAlarmOther 2 ddsNetFDLAlarmNone 3 ddsNetFDLAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.4.2.1.21
ddsNetAlarmResetTimer Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.22
ddsNetAlarmReset This is used to clear the current alarm counts.	Enumerationr/w Enumerated Values: 1 ddsNetAlarmResetOther 2 ddsNetAlarmResetClearAlarms	.1.3.6.1.4.1.321.100.2.4.2.1.23
ddsNetBPVStatus Reports if a Bipolar violation event occurred in the last second.	Enumeration Enumerated Values: 1 ddsNetStatusBPVOther 2 ddsNetStatusNoBPV 3 ddsNetStatusBPV	.1.3.6.1.4.1.321.100.2.4.2.1.24
ddsNetBPVCount This count contains the number of consecutive seconds the unit received bipolar violations.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.4.2.1.25
ddsNetBPVThreshold A period, measured in seconds, in which the unit receives bipolar violations before an alarm is triggered.	Enumerationr/w Enumerated Values: 1 ddsNetBPVThresholdOther 2 ddsNetBPVThresholdNone 3 ddsNetBPVThreshold1 4 ddsNetBPVThreshold2 5 ddsNetBPVThreshold3 6 ddsNetBPVThreshold4 7 ddsNetBPVThreshold5 8 ddsNetBPVThreshold10 9 ddsNetBPVThreshold20 10 ddsNetBPVThreshold30	.1.3.6.1.4.1.321.100.2.4.2.1.26
ddsNetBPVAlarm This status indicates if the Bipolar violation Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 ddsNetBPVAlarmOther 2 ddsNetBPVAlarmNone 3 ddsNetBPVAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.4.2.1.27

The Serial DTE Config Table.

serialDteConfigTableEntry row .1.3.6.1.4.1.321.100.2.5.1.1

An entry in the serial DTE Config Table.

Indexes

serialDteConfigNearIndex serialDteConfigFarIndex serialDteConfigIndex

Column	Syntax	OID
serialDteConfigNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.1.1.1
serialDteConfigFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.1.1.2
serialDteConfigIndex Index into the DteTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.1.1.3
serialDteDescription Contains a textual description of the port.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.5.1.1.4
serialDteType Selects the DTE port type if applicable.	Enumerationr/w Enumerated Values: 1 serialDteTypeOther 2 serialDteTypeV35 3 serialDteTypeRS232 4 serialDteTypeEIA530 5 serialDteTypeX21 6 serialDteTypeV36 7 serialDteTypeEIA530A	.1.3.6.1.4.1.321.100.2.5.1.1.5
serialDteRate Selects the DTE port bit.	Enumerationr/w Enumerated Values: 1 serialDteRateOther 2 serialDteRate2400 3 serialDteRate4800 4 serialDteRate9600 5 serialDteRate19200 6 serialDteRate38400 7 serialDteRate52000 8 serialDteRate56000 9 serialDteRate57600 10 serialDteRate60000 11 serialDteRate64000 12 serialDteRate112000 13 serialDteRate128000 14 serialDteRate168000 15 serialDteRate192000 16 serialDteRate224000 17 serialDteRate256000 18 serialDteRate280000 19 serialDteRate320000 20 serialDteRate336000 21 serialDteRate384000 22 serialDteRate392000 23 serialDteRate448000 24 serialDteRate504000 25 serialDteRate512000 26 serialDteRate560000 27 serialDteRate576000 28 serialDteRate616000 29 serialDteRate640000 30 serialDteRate672000 31 serialDteRate704000 32 serialDteRate728000 33 serialDteRate768000 34 serialDteRate784000 35 serialDteRate832000 36 serialDteRate840000 37 serialDteRate896000 38 serialDteRate952000 39 serialDteRate960000 40 serialDteRate1008000 41 serialDteRate1024000 42 serialDteRate1064000 43 serialDteRate1088000 44 serialDteRate1120000 45 serialDteRate1152000 46 serialDteRate1176000 47 serialDteRate1216000 48 serialDteRate1232000 49 serialDteRate1280000 50 serialDteRate1288000 51 serialDteRate1344000 52 serialDteRate1400000 53 serialDteRate1408000 54 serialDteRate1456000 55 serialDteRate1472000 56 serialDteRate1512000 57 serialDteRate1536000 58 serialDteRate1568000 59 serialDteRate1600000 60 serialDteRate1624000 61 serialDteRate1664000 62 serialDteRate1680000 63 serialDteRate1728000 64 serialDteRate1736000 65 serialDteRate1792000 66 serialDteRate1856000 67 serialDteRate1920000 68 serialDteRate1984000 69 serialDteRate2048000 70 serialDteRate1200 71 serialDteRate14400 72 serialDteRate28800 73 serialDteRate48000 74 serialDteRate31200 75 serialDteRate115200 76 serialDteRate2112000 77 serialDteRate2176000 78 serialDteRate2240000 79 serialDteRate2304000 80 serialDteRate300 81 serialDteRate600 82 serialDteRate3072000 83 serialDteRate4096000	.1.3.6.1.4.1.321.100.2.5.1.1.6
serialDteInvertData Specifies whether transmit and receive are inverted at the port.	Enumerationr/w Enumerated Values: 1 serialDteInvertDataOther 2 serialDteInvertDataDisabled 3 serialDteInvertDataEnabled	.1.3.6.1.4.1.321.100.2.5.1.1.7
serialDteFormat This variable describes the current operations format of the DTE interface. The values mean: serialDteFormatSync The DTE interface is currently set to operate in Synchronous clocking format serialDteFormatAsync The DTE …	Enumerationr/w Enumerated Values: 1 serialDteFormatOther 2 serialDteFormatSync 3 serialDteFormatAsync 4 serialDteFormatNotAvail	.1.3.6.1.4.1.321.100.2.5.1.1.8
serialDteParity This variable describes the current parity selected for the DTE interface. This variable is only valid when the DTE Mode is set to ASYNC. The values mean: serialDteParityNone The DTE interface is currently set for no pa…	Enumerationr/w Enumerated Values: 1 serialDteParityOther 2 serialDteParityNone 3 serialDteParityOdd 4 serialDteParityEven 5 serialDteParityMark 6 serialDteParitySpace 7 serialDteParityNotAvail	.1.3.6.1.4.1.321.100.2.5.1.1.9
serialDteStopBit This variable describes the stop bit setting for the DTE interface. This variable is only valid when the DTE interface is set to ASYNC. The values mean: serialDteStopBit1 The DTE interface is configured to operate in th…	Enumerationr/w Enumerated Values: 1 serialDteStopBitOther 2 serialDteStopBit1 3 serialDteStopBit2 4 serialDteStopBitNotAvail	.1.3.6.1.4.1.321.100.2.5.1.1.10
serialDteMode This variable describes mode in which data is being sent from the DDS unit back towards the network.	Enumerationr/w Enumerated Values: 1 serialDteModeOther 2 serialDteModeDDSI 3 serialDteModeDDSII 4 serialDteModeTxpINormal 5 serialDteModeTxpITDM 6 serialDteModeTxpIINormal 7 serialDteModeTxpIITDM	.1.3.6.1.4.1.321.100.2.5.1.1.11
serialDteDSR Selects DSR behavior.	Enumerationr/w Enumerated Values: 1 serialDteDSROther 2 serialDteDSRTestOff 3 serialDteDSRForcedOn 4 serialDteDSRForcedOff 5 serialDteDSRInternal	.1.3.6.1.4.1.321.100.2.5.1.1.12
serialDteDCD Selects DCD behavior.	Enumerationr/w Enumerated Values: 1 serialDteDCDOther 2 serialDteDCDIdleOff 3 serialDteDCDForcedOn 4 serialDteDCDForcedOff 5 serialDteDCDInternal 6 serialDteDCDFarRTS	.1.3.6.1.4.1.321.100.2.5.1.1.13
serialDteRTS Selects RTS behavior.	Enumerationr/w Enumerated Values: 1 serialDteRTSOther 2 serialDteRTSNormal 3 serialDteRTSForcedOn 4 serialDteRTSExternal	.1.3.6.1.4.1.321.100.2.5.1.1.14
serialDteRTSDelay Selects RTS to CTS transition delay.	Enumerationr/w Enumerated Values: 1 serialDteRTSDelayOther 2 serialDteRTSDelayNormal 3 serialDteRTSDelayLong	.1.3.6.1.4.1.321.100.2.5.1.1.15
serialDteDTR Reports if DTR from the DTE device is false.	Enumeration Enumerated Values: 1 serialDteDTROther 2 serialDteDTRFalse 3 serialDteDTRTrue	.1.3.6.1.4.1.321.100.2.5.1.1.16
serialDteCTS Specifies the control of the CTS signal at the port.	Enumerationr/w Enumerated Values: 1 serialDteCTSOther 2 serialDteCTSForceTrue 3 serialDteCTSForceFalse 4 serialDteCTSInternal	.1.3.6.1.4.1.321.100.2.5.1.1.17
serialDteV54 Specifies if the unit should respond to inband V.54 loop commands.	Enumerationr/w Enumerated Values: 1 serialDteV54Other 2 serialDteV54Disable 3 serialDteV54Enable	.1.3.6.1.4.1.321.100.2.5.1.1.18
serialDteLL Specifies if the unit should respond to local loop activation by the local loopback signal (EIA530 or RS-232 pin 18).	Enumerationr/w Enumerated Values: 1 serialDteLLOther 2 serialDteLLDisable 3 serialDteLLEnable	.1.3.6.1.4.1.321.100.2.5.1.1.19
serialDteRL Specifies if the unit should respond to remote loop activation by the remote loopback signal (EIA530 or RS-232 pin 21).	Enumerationr/w Enumerated Values: 1 serialDteRLOther 2 serialDteRLDisable 3 serialDteRLEnable	.1.3.6.1.4.1.321.100.2.5.1.1.20
serialDteStartChannel Specifies the starting channel for the interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.1.1.21
serialDteNumberOfChannels Specifies the number of channels allocated to the interface.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.1.1.22
serialDteTxClock Specifies how the interface derives its transmit clock.	Enumerationr/w Enumerated Values: 1 serialDteTxClockOther 2 serialDteTxClockInternal 3 serialDteTxClockExternal 4 serialDteTxClockOversample	.1.3.6.1.4.1.321.100.2.5.1.1.23
serialDteBundle Specifies the allocation pattern of channels assigned to the serial port.	Enumerationr/w Enumerated Values: 1 other 2 contiguous 3 alternate	.1.3.6.1.4.1.321.100.2.5.1.1.24
serialDteChannelRate Specifies the rate of all channels assigned to the serial port.	Enumerationr/w Enumerated Values: 1 other 2 nx56k 3 nx64k	.1.3.6.1.4.1.321.100.2.5.1.1.25
serialDteInvertClock Specifies if an inverted clock is used to send data from the serial port.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.321.100.2.5.1.1.26
serialDteCharSize Specifies the number of bits per character. This variable is valid in ASYNC mode.	Enumerationr/w Enumerated Values: 1 other 2 five 3 six 4 seven 5 eight	.1.3.6.1.4.1.321.100.2.5.1.1.27
serialDteFlowControl Specifies the Flow control to use. This variable is valid only in ASYNC mode.	Enumerationr/w Enumerated Values: 1 other 2 none 3 xonXoff 4 rtsCts	.1.3.6.1.4.1.321.100.2.5.1.1.28
serialDtePinStatus This object provides a summary of the Serial port pin status.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.5.1.1.29
serialDteInInvertClock Specifies to use the inverted clock edge for data clocked into the serial port.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.321.100.2.5.1.1.30

The Serial DTE Alarm Table.

serialDteAlarmTableEntry row .1.3.6.1.4.1.321.100.2.5.2.1

An entry in the serial DTE Alarm Table.

Indexes

serialDteAlarmNearIndex serialDteAlarmFarIndex serialDteAlarmIndex

Column	Syntax	OID
serialDteAlarmNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.1
serialDteAlarmFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.2
serialDteAlarmIndex Index into the serialDteAlarmTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.3
serialDteDTRAlarmControl Specifies if the unit should alarm on loss of DTR.	Enumerationr/w Enumerated Values: 1 serialDteDTRAlarmOther 2 serialDteDTRAlarmDisable 3 serialDteDTRAlarmEnable	.1.3.6.1.4.1.321.100.2.5.2.1.4
serialDteDTRAlarmStatus This status indicates a DTR Loss alarm is active.	Enumeration Enumerated Values: 1 serialDteDTRAlarmOther 2 serialDteDTRAlarmNone 3 serialDteDTRAlarmActive	.1.3.6.1.4.1.321.100.2.5.2.1.5
serialDteStatusSummary This object provides a summary of the port status.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.5.2.1.6
serialDteAlarmSummary This object provides a summary of the port alarms.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.321.100.2.5.2.1.7
serialDteASCStatus Reports if an ASC condition exists on the interface.	Enumeration Enumerated Values: 1 serialDteStatusASCOther 2 serialDteStatusNoASC 3 serialDteStatusASC	.1.3.6.1.4.1.321.100.2.5.2.1.8
serialDteASCCount This count contains the number of ASC seconds received by the interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.9
serialDteASCThreshold The number of ASC seconds that must be received before an alarm is declared.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.10
serialDteASCAlarm This status indicates if the ASC Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 serialDteASCAlarmOther 2 serialDteASCAlarmNone 3 serialDteASCAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.5.2.1.11
serialDteFDLStatus Reports if an FDL error condition exists on the interface.	Enumeration Enumerated Values: 1 serialDteStatusFDLOther 2 serialDteStatusNoFDL 3 serialDteStatusFDL	.1.3.6.1.4.1.321.100.2.5.2.1.12
serialDteFDLCount This count contains the number of FDL errored seconds received by the interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.13
serialDteFDLThreshold The number of FDL errored seconds that must be received before an alarm is declared.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.14
serialDteFDLAlarm This status indicates if the FDL Errored Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 serialDteFDLAlarmOther 2 serialDteFDLAlarmNone 3 serialDteFDLAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.5.2.1.15
serialDteLOSStatus Reports if an LOS condition exists on the interface.	Enumeration Enumerated Values: 1 serialDteStatusLOSOther 2 serialDteStatusNoLOS 3 serialDteStatusLOS	.1.3.6.1.4.1.321.100.2.5.2.1.16
serialDteLOSCount This count contains the number of LOS seconds received by the interface.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.17
serialDteLOSThreshold The number of LOS seconds that must be received before an alarm is declared.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.5.2.1.18
serialDteLOSAlarm This status indicates if the LOS Seconds threshold is exceeded.	Enumeration Enumerated Values: 1 serialDteLOSAlarmOther 2 serialDteLOSAlarmNone 3 serialDteLOSAlarmThresholdExceeded	.1.3.6.1.4.1.321.100.2.5.2.1.19

The Analog DTE Table.

analogDteTableEntry row .1.3.6.1.4.1.321.100.2.6.1.1

An entry in the Analog DTE Table.

Indexes

analogDteNearIndex analogDteFarIndex analogDteIndex

Column	Syntax	OID
analogDteNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.6.1.1.1
analogDteFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.6.1.1.2
analogDteIndex Index into the analogDteTable.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.6.1.1.3
analogDteDescription Contains a textual description of the port.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.6.1.1.4
analogDteCardType Identifies the analog DTE card type.	Enumeration Enumerated Values: 1 analogDteCardTypeOther 2 analogDteCardTypeFXS 3 analogDteCardTypeFXO 4 analogDteCardType4WEM	.1.3.6.1.4.1.321.100.2.6.1.1.5
analogDteMode Selects whether the port is actively assigned to a network channel or not used.	Enumerationr/w Enumerated Values: 1 analogDteModeOther 2 analogDteModeSpare 3 analogDteModeActive	.1.3.6.1.4.1.321.100.2.6.1.1.6
analogDteState Displays the port status as either in the Busy or Idle state.	Enumeration Enumerated Values: 1 analogDteStateOther 2 analogDteStateIdle 3 analogDteStateBusy	.1.3.6.1.4.1.321.100.2.6.1.1.7
analogDteElementID This object signifies the name of the device.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.321.100.2.6.1.1.8
analogDteSignalling Selects the supervisory operation of the port.	Enumerationr/w Enumerated Values: 1 analogDteSignallingOther 2 analogDteSignallingFXSLS 3 analogDteSignallingFXSGS 4 analogDteSignallingUVG 5 analogDteSignallingMEGLS 6 analogDteSignallingMEGGS 7 analogDteSignallingMEGRLS 8 analogDteSignallingMEGRGS 9 analogDteSignallingPLAR 10 analogDteSignallingSLC96 11 analogDteSignallingDIDDNIS 12 analogDteSignallingDNISWLS 13 analogDteSignallingDNISDLS 14 analogDteSignallingDNISWRLS 15 analogDteSignallingDNISDRLS 16 analogDteSignallingDNISWGS 17 analogDteSignallingDNISDGS 18 analogDteSignallingDNISWRGS 19 analogDteSignallingDNISDRGS 20 analogDteSignallingFXOLS 21 analogDteSignallingFXOGS 22 analogDteSignallingFXOUVG 23 analogDteSignallingFXOUVGR 24 analogDteSignalling4WEMTYPE1 25 analogDteSignalling4WEMTYPE2 26 analogDteSignalling4WEMTYPE3 27 analogDteSignalling4WEMTYPE4 28 analogDteSignalling4WEMTYPE5 29 analogDteSignalling4WEMTO	.1.3.6.1.4.1.321.100.2.6.1.1.9
analogDteDNISDelay If the signalling mode has a delay, it can be set from 1 to 5 seconds.	Enumerationr/w Enumerated Values: 1 analogDteDNISDelayOther 2 analogDteDNISDelay1Second 3 analogDteDNISDelay2Seconds 4 analogDteDNISDelay3Seconds 5 analogDteDNISDelay4Seconds 6 analogDteDNISDelay5Seconds	.1.3.6.1.4.1.321.100.2.6.1.1.10
analogDteTxGain Selects the transmit gain. Values prefixed with m are negative.	Enumerationr/w Enumerated Values: 1 analogDteTxGainOther 2 analogDteTxGain3DB 3 analogDteTxGain2DB 4 analogDteTxGain1DB 5 analogDteTxGain0DB 6 analogDteTxGainm1DB 7 analogDteTxGainm2DB 8 analogDteTxGainm3DB 9 analogDteTxGainm4DB 10 analogDteTxGainm5DB 11 analogDteTxGainm6DB 12 analogDteTxGainm7DB 13 analogDteTxGainm8DB 14 analogDteTxGainm9DB 15 analogDteTxGainm10DB	.1.3.6.1.4.1.321.100.2.6.1.1.11
analogDteRxGain Selects the receive gain. Values prefixed with m are negative.	Enumerationr/w Enumerated Values: 1 analogDteRxGainOther 2 analogDteRxGain2DB 3 analogDteRxGain1DB 4 analogDteRxGain0DB 5 analogDteRxGainm1DB 6 analogDteRxGainm2DB 7 analogDteRxGainm3DB 8 analogDteRxGainm4DB 9 analogDteRxGainm5DB 10 analogDteRxGainm6DB 11 analogDteRxGainm7DB 12 analogDteRxGainm8DB 13 analogDteRxGainm9DB 14 analogDteRxGainm10DB 15 analogDteRxGainm11DB 16 analogDteRxGainm12DB 17 analogDteRxGainm13DB 18 analogDteRxGainm14DB 19 analogDteRxGainm15DB 20 analogDteRxGainm16DB	.1.3.6.1.4.1.321.100.2.6.1.1.12

The connection table.

connectionTableEntry row .1.3.6.1.4.1.321.100.2.7.1.1

An entry in the connection table.

Indexes

connectionNearIndex connectionFarIndex connectionTableIndex

Column	Syntax	OID
connectionNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.1.1.1
connectionFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.1.1.2
connectionTableIndex The index into the connection table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.1.1.3
connectionTableDescription A description of the connection.	OctetString Constraints: range: 0-60	.1.3.6.1.4.1.321.100.2.7.1.1.4

The channel-level connection table.

connectionChannelEntry row .1.3.6.1.4.1.321.100.2.7.2.1

An entry in the connectionChannelTable.

Indexes

connectionChannelNearIndex connectionChannelFarIndex connectionChannelLineIndex connectionChannelIndex

Column	Syntax	OID
connectionChannelNearIndex Selects the near device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.2.1.1
connectionChannelFarIndex Selects the far device.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.2.1.2
connectionChannelLineIndex Selects instance of line.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.2.1.3
connectionChannelIndex The index into the connection table.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.2.1.4
channelInterfaceAssignment The channel assignment.	Enumerationr/w Enumerated Values: 1 other 2 unassigned 3 dTE 4 remComm 5 port1 6 port2 7 port3 8 port4 9 port5 10 port6 11 port7 12 port8 13 port9 14 port10 15 port11 16 port12 17 port13 18 port14 19 port15 20 port16 21 port17 22 port18 23 port19 24 port20 25 port21 26 port22 27 port23 28 port24 29 port25 30 port26 31 port27 32 port28 33 port29 34 port30 35 port31 36 port32 37 slot2PortA 38 slot2PortB 39 slot3PortA 40 slot3PortB 41 slot4PortA 42 slot4PortB 43 slot5PortA 44 slot5PortB 45 slot6PortA 46 slot6PortB 47 slot2Dsu1PortA 48 slot2Dsu1PortB 49 slot2Dsu2PortA 50 slot2Dsu2PortB 51 slot2Dsu3PortA 52 slot2Dsu3PortB 53 slot2Dsu4PortA 54 slot2Dsu4PortB 55 slot2Dsu5PortA 56 slot2Dsu5PortB 57 slot2Dsu6PortA 58 slot2Dsu6PortB 59 slot3Dsu1PortA 60 slot3Dsu1PortB 61 slot3Dsu2PortA 62 slot3Dsu2PortB 63 slot3Dsu3PortA 64 slot3Dsu3PortB 65 slot3Dsu4PortA 66 slot3Dsu4PortB 67 slot3Dsu5PortA 68 slot3Dsu5PortB 69 slot3Dsu6PortA 70 slot3Dsu6PortB 71 slot4Dsu1PortA 72 slot4Dsu1PortB 73 slot4Dsu2PortA 74 slot4Dsu2PortB 75 slot4Dsu3PortA 76 slot4Dsu3PortB 77 slot4Dsu4PortA 78 slot4Dsu4PortB 79 slot4Dsu5PortA 80 slot4Dsu5PortB 81 slot4Dsu6PortA 82 slot4Dsu6PortB 83 slot5Dsu1PortA 84 slot5Dsu1PortB 85 slot5Dsu2PortA 86 slot5Dsu2PortB 87 slot5Dsu3PortA 88 slot5Dsu3PortB 89 slot5Dsu4PortA 90 slot5Dsu4PortB 91 slot5Dsu5PortA 92 slot5Dsu5PortB 93 slot5Dsu6PortA 94 slot5Dsu6PortB 95 slot6Dsu1PortA 96 slot6Dsu1PortB 97 slot6Dsu2PortA 98 slot6Dsu2PortB 99 slot6Dsu3PortA 100 slot6Dsu3PortB 101 slot6Dsu4PortA 102 slot6Dsu4PortB 103 slot6Dsu5PortA 104 slot6Dsu5PortB 105 slot6Dsu6PortA 106 slot6Dsu6PortB	.1.3.6.1.4.1.321.100.2.7.2.1.5
channelInterfaceDescription Contains a description of the interface channel connection.	OctetString Constraints: range: 0-40	.1.3.6.1.4.1.321.100.2.7.2.1.6
channelInterfaceChannel Displays the corresponding channel of the interface channel connection.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.321.100.2.7.2.1.7
channelSignalling Allows a selection of Clear Channel or Robbed Bit signalling for each DS0.	Enumerationr/w Enumerated Values: 1 other 2 clearChannel 3 robbedBit	.1.3.6.1.4.1.321.100.2.7.2.1.8