t1e1CRC
DS8200v2-MIB ·
.1.3.6.1.4.1.321.100.2.3.1.1.18
Object
column
r/w
Enumeration
Determines whether received CRC data is passed through or regenerated.
Context
- MIB
- DS8200v2-MIB
- OID
.1.3.6.1.4.1.321.100.2.3.1.1.18- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- t1e1ConfigTableEntry
- Table
- t1e1ConfigTable
- Siblings
- 33
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | t1e1CRCOther |
2 | t1e1CRCPass |
3 | t1e1CRCRegenerate |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| t1e1ConfigNearIndex Selects the near device. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.1.1.1 |
| t1e1StationInTiming Selects the input timing if t1e1Timing is set to Station. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.10 |
| t1e1StationTiming Selects the N-multiple when Station Input Timing is set to either NX56 or NX65. The N range is 1..24 | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.1.1.11 |
| t1e1PRM Enables the ANSI T1.403 Performance Report Message functions. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.12 |
| t1e1ZeroSuppress Determines whether ones density insertion is activated after 15 zeros . To ensure compliance with TR54016, this field must be enabled. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.13 |
| t1e1NationalBit Selects a national bit to create a 4-kbps datalink between the endpoint units. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.14 |
| t1e1KeepAlive Selects keep alive framed and unframed ones when the unit detects LOS or OOF. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.15 |
| t1e1CRC4Mode Selects whether CRC4 is enabled or disabled. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.16 |
| t1e1DSXLevel Selects the DSX1 interface output level. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.17 |
| t1e1FDLPassThrough Determines whether the ESF FDL passes through the CSU or terminates. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.19 |
| t1e1ConfigFarIndex Selects the far device. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.1.1.2 |
| t1e1AudibleAlarm If applicable, Enables or Disables the CSU's internal buzzer which alerts users of an alarm condition. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.20 |
| t1e1Function Specifies the function the network port will perform in the unit.
The options are:
t1e1FunctionNetwork (Independent network port)
t1e1FunctionSlaved (Slaved to another network … | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.21 |
| t1e1EBitGeneration | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.22 |
| t1e1RAIGeneration | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.23 |
| t1e1SpareBitInsertion | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.24 |
| t1e1Sa4In | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.25 |
| t1e1Sa5In | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.26 |
| t1e1Sa6In | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.27 |
| t1e1Sa7In | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.28 |
| t1e1Sa8In | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.29 |
| t1e1ConfigIndex This object is the index into the t1e1Table. | column | Integer32 | .1.3.6.1.4.1.321.100.2.3.1.1.3 |
| t1e1Sa4Out | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.30 |
| t1e1Sa5Out | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.31 |
| t1e1Sa6Out | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.32 |
| t1e1Sa7Out | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.33 |
| t1e1Sa8Out | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.34 |
| t1e1Description Contains a textual description of the port. | column | OctetString | .1.3.6.1.4.1.321.100.2.3.1.1.4 |
| t1e1Mode This object identifies the port as either a Network (long-haul) or DTE (short-haul) port. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.5 |
| t1e1FrameType Selects the framing for the network side of the DSU/CSU. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.6 |
| t1e1LineCode Selects the network side line coding. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.7 |
| t1e1LineBuildOut Selects the line build out for the network interface. The options are:
t1e1LineBuildOut0db indicates a line build out of 0db
t1e1LineBuildOut75db indicates a line build out… | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.8 |
| t1e1Timing Sets the timing source to synchronize the unit's internal timing generators. | column | Enumeration | .1.3.6.1.4.1.321.100.2.3.1.1.9 |