serialDteRate

DS8200v2-MIB · .1.3.6.1.4.1.321.100.2.5.1.1.6

Object

column r/w Enumeration

Selects the DTE port bit.

Context

MIB: DS8200v2-MIB
OID: .1.3.6.1.4.1.321.100.2.5.1.1.6
Type: column
Access: readwrite
Status: current
Parent: serialDteConfigTableEntry
Table: serialDteConfigTable
Siblings: 29

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	serialDteRateOther
`2`	serialDteRate2400
`3`	serialDteRate4800
`4`	serialDteRate9600
`5`	serialDteRate19200
`6`	serialDteRate38400
`7`	serialDteRate52000
`8`	serialDteRate56000
`9`	serialDteRate57600
`10`	serialDteRate60000
`11`	serialDteRate64000
`12`	serialDteRate112000
`13`	serialDteRate128000
`14`	serialDteRate168000
`15`	serialDteRate192000
`16`	serialDteRate224000
`17`	serialDteRate256000
`18`	serialDteRate280000
`19`	serialDteRate320000
`20`	serialDteRate336000
`21`	serialDteRate384000
`22`	serialDteRate392000
`23`	serialDteRate448000
`24`	serialDteRate504000
`25`	serialDteRate512000
`26`	serialDteRate560000
`27`	serialDteRate576000
`28`	serialDteRate616000
`29`	serialDteRate640000
`30`	serialDteRate672000
`31`	serialDteRate704000
`32`	serialDteRate728000
`33`	serialDteRate768000
`34`	serialDteRate784000
`35`	serialDteRate832000
`36`	serialDteRate840000
`37`	serialDteRate896000
`38`	serialDteRate952000
`39`	serialDteRate960000
`40`	serialDteRate1008000
`41`	serialDteRate1024000
`42`	serialDteRate1064000
`43`	serialDteRate1088000
`44`	serialDteRate1120000
`45`	serialDteRate1152000
`46`	serialDteRate1176000
`47`	serialDteRate1216000
`48`	serialDteRate1232000
`49`	serialDteRate1280000
`50`	serialDteRate1288000
`51`	serialDteRate1344000
`52`	serialDteRate1400000
`53`	serialDteRate1408000
`54`	serialDteRate1456000
`55`	serialDteRate1472000
`56`	serialDteRate1512000
`57`	serialDteRate1536000
`58`	serialDteRate1568000
`59`	serialDteRate1600000
`60`	serialDteRate1624000
`61`	serialDteRate1664000
`62`	serialDteRate1680000
`63`	serialDteRate1728000
`64`	serialDteRate1736000
`65`	serialDteRate1792000
`66`	serialDteRate1856000
`67`	serialDteRate1920000
`68`	serialDteRate1984000
`69`	serialDteRate2048000
`70`	serialDteRate1200
`71`	serialDteRate14400
`72`	serialDteRate28800
`73`	serialDteRate48000
`74`	serialDteRate31200
`75`	serialDteRate115200
`76`	serialDteRate2112000
`77`	serialDteRate2176000
`78`	serialDteRate2240000
`79`	serialDteRate2304000
`80`	serialDteRate300
`81`	serialDteRate600
`82`	serialDteRate3072000
`83`	serialDteRate4096000

Related Objects

Sibling Objects

Object	Type	Syntax	OID
serialDteConfigNearIndex Selects the near device.	column	Integer32	`.1.3.6.1.4.1.321.100.2.5.1.1.1`
serialDteStopBit This variable describes the stop bit setting for the DTE interface. This variable is only valid when the DTE interface is set to ASYNC. The values mean: serialDteStopBit1 The DTE …	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.10`
serialDteMode This variable describes mode in which data is being sent from the DDS unit back towards the network.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.11`
serialDteDSR Selects DSR behavior.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.12`
serialDteDCD Selects DCD behavior.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.13`
serialDteRTS Selects RTS behavior.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.14`
serialDteRTSDelay Selects RTS to CTS transition delay.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.15`
serialDteDTR Reports if DTR from the DTE device is false.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.16`
serialDteCTS Specifies the control of the CTS signal at the port.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.17`
serialDteV54 Specifies if the unit should respond to inband V.54 loop commands.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.18`
serialDteLL Specifies if the unit should respond to local loop activation by the local loopback signal (EIA530 or RS-232 pin 18).	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.19`
serialDteConfigFarIndex Selects the far device.	column	Integer32	`.1.3.6.1.4.1.321.100.2.5.1.1.2`
serialDteRL Specifies if the unit should respond to remote loop activation by the remote loopback signal (EIA530 or RS-232 pin 21).	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.20`
serialDteStartChannel Specifies the starting channel for the interface.	column	Integer32	`.1.3.6.1.4.1.321.100.2.5.1.1.21`
serialDteNumberOfChannels Specifies the number of channels allocated to the interface.	column	Integer32	`.1.3.6.1.4.1.321.100.2.5.1.1.22`
serialDteTxClock Specifies how the interface derives its transmit clock.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.23`
serialDteBundle Specifies the allocation pattern of channels assigned to the serial port.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.24`
serialDteChannelRate Specifies the rate of all channels assigned to the serial port.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.25`
serialDteInvertClock Specifies if an inverted clock is used to send data from the serial port.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.26`
serialDteCharSize Specifies the number of bits per character. This variable is valid in ASYNC mode.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.27`
serialDteFlowControl Specifies the Flow control to use. This variable is valid only in ASYNC mode.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.28`
serialDtePinStatus This object provides a summary of the Serial port pin status.	column	OctetString	`.1.3.6.1.4.1.321.100.2.5.1.1.29`
serialDteConfigIndex Index into the DteTable.	column	Integer32	`.1.3.6.1.4.1.321.100.2.5.1.1.3`
serialDteInInvertClock Specifies to use the inverted clock edge for data clocked into the serial port.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.30`
serialDteDescription Contains a textual description of the port.	column	OctetString	`.1.3.6.1.4.1.321.100.2.5.1.1.4`
serialDteType Selects the DTE port type if applicable.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.5`
serialDteInvertData Specifies whether transmit and receive are inverted at the port.	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.7`
serialDteFormat This variable describes the current operations format of the DTE interface. The values mean: serialDteFormatSync The DTE interface is currently set to operate in Synchronous clock…	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.8`
serialDteParity This variable describes the current parity selected for the DTE interface. This variable is only valid when the DTE Mode is set to ASYNC. The values mean: serialDteParityNone The …	column	Enumeration	`.1.3.6.1.4.1.321.100.2.5.1.1.9`