dot3ExtPkgOptIfUpperOutputPowerThreshold
DOT3-EPON-MIB ·
.1.3.6.1.2.1.155.1.4.1.5.1.11
Object
The upper limit threshold on output power. If dot3ExtPkgOptIfOutputPower reaches or exceeds this value, a Threshold Crossing Alert (TCA) should be sent. Reading will present the threshold value. Writing will set the value of the threshold. The write operation is not restricted in this document and can be done at any time. Changing dot3ExtPkgOptIfUpperOutputPowerThreshold can lead to a Threshold Crossing Alert (TCA) being sent for the respective interface. This alert may be leading to an interruption of service of the users connected to the respective EPON interface, depending on the system action on such an alert. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface.
Context
- MIB
- DOT3-EPON-MIB
- OID
.1.3.6.1.2.1.155.1.4.1.5.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 0.1 dbm
- Parent
- dot3ExtPkgOptIfEntry
- Table
- dot3ExtPkgOptIfTable
- Siblings
- 13
Syntax
0.1 dbm SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3ExtPkgOptIfSuspectedFlag This object is a reliability indication.
If true, the data in this entry may be unreliable.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value f… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.1 |
| dot3ExtPkgOptIfLowerOutputPowerThreshold The lower limit threshold on output power. If
dot3ExtPkgOptIfOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the t… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.10 |
| dot3ExtPkgOptIfSignalDetect When getting true(1), there is a valid optical signal at
the receive that is above the optical power level for
signal detection. When getting false(2) the optical
signal at the r… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.12 |
| dot3ExtPkgOptIfTransmitAlarm When getting true(1) there is a non-valid optical signal
at the transmit of the interface, either a higher level
or lower level than expected. When getting false(2) the
optical s… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.13 |
| dot3ExtPkgOptIfTransmitEnable Setting this object to true(1) will cause the optical
interface to start transmission (according to the
control protocol specified for the logical interface).
Setting this object … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.14 |
| dot3ExtPkgOptIfInputPower The optical power monitored at the input.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.2 |
| dot3ExtPkgOptIfLowInputPower The lowest optical power monitored at the input during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for ea… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.3 |
| dot3ExtPkgOptIfHighInputPower The highest optical power monitored at the input during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.4 |
| dot3ExtPkgOptIfLowerInputPowerThreshold The lower limit threshold on input power. If
dot3ExtPkgOptIfInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the thr… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.5 |
| dot3ExtPkgOptIfUpperInputPowerThreshold The upper limit threshold on input power. If
dot3ExtPkgOptIfInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the th… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.6 |
| dot3ExtPkgOptIfOutputPower The optical power monitored at the output.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.7 |
| dot3ExtPkgOptIfLowOutputPower The lowest optical power monitored at the output during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.8 |
| dot3ExtPkgOptIfHighOutputPower The highest optical power monitored at the output during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for … | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.9 |