DOT3-EPON-MIB

        The objects in this MIB module are used to manage the
Ethernet in the First Mile (EFM) Ethernet Passive Optical
Network (EPON) Interfaces as defined in IEEE P802.3ah
clauses 60, 64, and 65.
The following reference is used throughout this MIB module:
[802.3ah] refers to:
Information technology - Telecommunications and
information exchange between systems - Local and
metropolitan area networks - Specific requirements -
Part 3: Carrier sense multiple access with collision
detection (CSMA/CD) access method and physical layer
specifications - Media Access Control Parameters,
Physical Layers and Management Parameters for subscriber
access networks.  IEEE Std 802.3ah-2004, October 2004.
        
Of particular interest are clause 64 (Multi-Point Control
Protocol - MPCP), clause 65 (Point-to-Multipoint
Reconciliation Sublayer - P2MP RS), clause 60 (Ethernet
Passive Optical Network Physical Medium Dependent - EPON
PMDs), clause 30, 'Management', and clause 45, 'Management
Data Input/Output (MDIO) Interface'.
        
Copyright (C) The IETF Trust (2007).  This version
of this MIB module is part of 4837; see the RFC itself for
full legal notices.
        
Key abbreviations:
BER - Bit Error Rate
BW - bandwidth
        
CRC - Cyclic Redundancy Check
EFM - Ethernet First Mile
EPON - Ethernet Passive Optical Network
FEC  - Forward Error Correction
LLID - Logical Link Identifier
MAC - Media Access Control
Mbps - Megabit per second
MDIO - Management Data Input/Output
MPCP - Multi-Point Control Protocol
OLT - Optical Line Terminal (Server unit of the EPON)
OMP - Optical Multi-Point
ONU - Optical Network Unit (Client unit of the EPON)
P2MP - Point-to-Multipoint
PHY - Physical Layer
PMD - Physical Medium Dependent
PON - Passive Optical Network
RTT - Round Trip Time
SLD - Start of LLID Delimiter
TQ - Time Quanta
    
Source file
DOT3-EPON-MIB
Last revised
Identity
dot3EponMIB
Base OID
1.3.6.1.2.1.155
Imported Objects
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Integer32 mib-2 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC MacAddress TruthValue
Net-SNMP examples using the rfc MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'DOT3-EPON-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'DOT3-EPON-MIB::dot3EponMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DOT3-EPON-MIB' -M '/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DOT3-EPON-MIB::dot3EponMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (99)
.1.3.6.1.2.1.155
.1.3.6.1.2.1.155.1
.1.3.6.1.2.1.155.1.1
.1.3.6.1.2.1.155.1.1.1
.1.3.6.1.2.1.155.1.1.1.1
.1.3.6.1.2.1.155.1.1.1.1.1
TQ (16nsec)Unsigned32
.1.3.6.1.2.1.155.1.1.1.1.10
Unsigned32
.1.3.6.1.2.1.155.1.1.1.1.11
.1.3.6.1.2.1.155.1.1.1.1.2
Enumeration
.1.3.6.1.2.1.155.1.1.1.1.3
.1.3.6.1.2.1.155.1.1.1.1.4
.1.3.6.1.2.1.155.1.1.1.1.5
.1.3.6.1.2.1.155.1.1.1.1.6
Enumeration
.1.3.6.1.2.1.155.1.1.1.1.7
.1.3.6.1.2.1.155.1.1.1.1.8
.1.3.6.1.2.1.155.1.1.1.1.9
.1.3.6.1.2.1.155.1.1.2
.1.3.6.1.2.1.155.1.1.2.1
.1.3.6.1.2.1.155.1.1.2.1.1
.1.3.6.1.2.1.155.1.1.2.1.10
.1.3.6.1.2.1.155.1.1.2.1.11
.1.3.6.1.2.1.155.1.1.2.1.12
.1.3.6.1.2.1.155.1.1.2.1.13
.1.3.6.1.2.1.155.1.1.2.1.14
.1.3.6.1.2.1.155.1.1.2.1.2
.1.3.6.1.2.1.155.1.1.2.1.3
.1.3.6.1.2.1.155.1.1.2.1.4
.1.3.6.1.2.1.155.1.1.2.1.5
.1.3.6.1.2.1.155.1.1.2.1.6
.1.3.6.1.2.1.155.1.1.2.1.7
.1.3.6.1.2.1.155.1.1.2.1.8
.1.3.6.1.2.1.155.1.1.2.1.9
.1.3.6.1.2.1.155.1.2
.1.3.6.1.2.1.155.1.2.1
.1.3.6.1.2.1.155.1.2.1.1
Enumeration
.1.3.6.1.2.1.155.1.2.1.1.1
.1.3.6.1.2.1.155.1.2.2
.1.3.6.1.2.1.155.1.2.2.1
.1.3.6.1.2.1.155.1.2.2.1.1
.1.3.6.1.2.1.155.1.2.2.1.10
.1.3.6.1.2.1.155.1.2.2.1.2
.1.3.6.1.2.1.155.1.2.2.1.3
.1.3.6.1.2.1.155.1.2.2.1.4
.1.3.6.1.2.1.155.1.2.2.1.5
.1.3.6.1.2.1.155.1.2.2.1.6
.1.3.6.1.2.1.155.1.2.2.1.7
.1.3.6.1.2.1.155.1.2.2.1.8
.1.3.6.1.2.1.155.1.2.2.1.9
.1.3.6.1.2.1.155.1.3
.1.3.6.1.2.1.155.1.3.1
.1.3.6.1.2.1.155.1.3.1.1
.1.3.6.1.2.1.155.1.3.1.1.1
Enumeration
.1.3.6.1.2.1.155.1.3.1.1.2
Enumeration
.1.3.6.1.2.1.155.1.3.1.1.3
.1.3.6.1.2.1.155.1.3.1.1.4
.1.3.6.1.2.1.155.1.3.1.1.5
.1.3.6.1.2.1.155.1.3.1.1.6
.1.3.6.1.2.1.155.1.4
.1.3.6.1.2.1.155.1.4.1
.1.3.6.1.2.1.155.1.4.1.1
.1.3.6.1.2.1.155.1.4.1.1.1
Enumeration
.1.3.6.1.2.1.155.1.4.1.1.1.1
.1.3.6.1.2.1.155.1.4.1.1.1.2
.1.3.6.1.2.1.155.1.4.1.1.1.3
Enumeration
.1.3.6.1.2.1.155.1.4.1.1.1.4
Unsigned32
.1.3.6.1.2.1.155.1.4.1.1.1.5
Enumeration
.1.3.6.1.2.1.155.1.4.1.1.1.6
.1.3.6.1.2.1.155.1.4.1.2
.1.3.6.1.2.1.155.1.4.1.2.1
Unsigned32
.1.3.6.1.2.1.155.1.4.1.2.1.1
Unsigned32
.1.3.6.1.2.1.155.1.4.1.2.1.2
Unsigned32
.1.3.6.1.2.1.155.1.4.1.2.1.3
.1.3.6.1.2.1.155.1.4.1.2.1.4
.1.3.6.1.2.1.155.1.4.1.2.1.5
.1.3.6.1.2.1.155.1.4.1.2.1.6
.1.3.6.1.2.1.155.1.4.1.3
.1.3.6.1.2.1.155.1.4.1.3.1
Unsigned32
.1.3.6.1.2.1.155.1.4.1.3.1.1
Unsigned32
.1.3.6.1.2.1.155.1.4.1.3.1.2
.1.3.6.1.2.1.155.1.4.1.3.1.3
.1.3.6.1.2.1.155.1.4.1.5
.1.3.6.1.2.1.155.1.4.1.5.1
.1.3.6.1.2.1.155.1.4.1.5.1.1
.1.3.6.1.2.1.155.1.4.1.5.1.10
.1.3.6.1.2.1.155.1.4.1.5.1.11
.1.3.6.1.2.1.155.1.4.1.5.1.12
.1.3.6.1.2.1.155.1.4.1.5.1.13
.1.3.6.1.2.1.155.1.4.1.5.1.14
.1.3.6.1.2.1.155.1.4.1.5.1.2
.1.3.6.1.2.1.155.1.4.1.5.1.3
.1.3.6.1.2.1.155.1.4.1.5.1.4
.1.3.6.1.2.1.155.1.4.1.5.1.5
.1.3.6.1.2.1.155.1.4.1.5.1.6
.1.3.6.1.2.1.155.1.4.1.5.1.7
.1.3.6.1.2.1.155.1.4.1.5.1.8
.1.3.6.1.2.1.155.1.4.1.5.1.9
.1.3.6.1.2.1.155.2
.1.3.6.1.2.1.155.2.1
.1.3.6.1.2.1.155.2.2
Dependencies (6) 4 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. SNMPv2-TCrfc
  3. IANAifType-MIBrfc
  4. SNMPv2-CONFrfc
  5. SNMPv2-MIBrfc
  6. IF-MIBrfc
  7. DOT3-EPON-MIBrfcselected
Conformance Groups (9)
A collection of objects of dot3 Mpcp Control entity state
definition. Objects are per LLID.
.1.3.6.1.2.1.155.2.1.1
A collection of objects of dot3 Mpcp Statistics.
Objects are per LLID.
.1.3.6.1.2.1.155.2.1.2
A collection of objects of dot3 OMP emulation entity
state definition. Objects are per LLID.
.1.3.6.1.2.1.155.2.1.3
A collection of objects of dot3 OMP emulation
Statistics. Objects are per LLID.
.1.3.6.1.2.1.155.2.1.4
A collection of objects of dot3 FEC group control and
statistics. Objects are per LLID.
.1.3.6.1.2.1.155.2.1.5
A collection of objects of dot3ExtPkg control
definition. Objects are per LLID.
.1.3.6.1.2.1.155.2.1.6
A collection of objects of dot3ExtPkg Queue
control. Objects are per LLID, per queue.
.1.3.6.1.2.1.155.2.1.7
A collection of objects of dot3ExtPkg queue_set
control. Objects are per LLID, per queue, per
queue_set.
.1.3.6.1.2.1.155.2.1.8
A collection of objects of control and status indication
of the optical interface.
Objects are per LLID.
.1.3.6.1.2.1.155.2.1.9
Compliance Statements (4)

OID .1.3.6.1.2.1.155.2.2.1
The compliance statement for Multi-Point
Control Protocol interfaces.
Required groups
mandatory dot3MpcpGroupBase
optional dot3MpcpGroupStat This group is mandatory for all MPCP supporting
interfaces for statistics collection.

OID .1.3.6.1.2.1.155.2.2.2
The compliance statement for OMPEmulation
interfaces.
Required groups
mandatory dot3OmpeGroupID
optional dot3OmpeGroupStat This group is mandatory for all OMPemulation
supporting interfaces for statistics collection.

OID .1.3.6.1.2.1.155.2.2.3
The compliance statement for FEC EPON interfaces.

This group is mandatory for all FEC supporting
interfaces for control and statistics collection.
Required groups

OID .1.3.6.1.2.1.155.2.2.4
The compliance statement for EPON Interfaces
using the extended package.
Required groups
mandatory dot3ExtPkgGroupControl
optional dot3ExtPkgGroupQueue This group is mandatory for all EPON interfaces
supporting REPORT queue management of the extended
package.
optional dot3ExtPkgGroupQueueSets This group is mandatory for all EPON interfaces
supporting REPORT queue_sets management of the
extended package.
optional dot3ExtPkgGroupOptIf This group is mandatory for all EPON interfaces
supporting optical interfaces management,
of the extended package.