dot3ExtPkgOptIfTransmitAlarm
DOT3-EPON-MIB ·
.1.3.6.1.2.1.155.1.4.1.5.1.13
Object
column
SNMPv2-TCTruthValue
When getting true(1) there is a non-valid optical signal at the transmit of the interface, either a higher level or lower level than expected. When getting false(2) the optical signal at the transmit is valid and in the required range. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface.
Context
- MIB
- DOT3-EPON-MIB
- OID
.1.3.6.1.2.1.155.1.4.1.5.1.13- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dot3ExtPkgOptIfEntry
- Table
- dot3ExtPkgOptIfTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3ExtPkgOptIfSuspectedFlag This object is a reliability indication.
If true, the data in this entry may be unreliable.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value f… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.1 |
| dot3ExtPkgOptIfLowerOutputPowerThreshold The lower limit threshold on output power. If
dot3ExtPkgOptIfOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the t… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.10 |
| dot3ExtPkgOptIfUpperOutputPowerThreshold The upper limit threshold on output power. If
dot3ExtPkgOptIfOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the … | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.11 |
| dot3ExtPkgOptIfSignalDetect When getting true(1), there is a valid optical signal at
the receive that is above the optical power level for
signal detection. When getting false(2) the optical
signal at the r… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.12 |
| dot3ExtPkgOptIfTransmitEnable Setting this object to true(1) will cause the optical
interface to start transmission (according to the
control protocol specified for the logical interface).
Setting this object … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.14 |
| dot3ExtPkgOptIfInputPower The optical power monitored at the input.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.2 |
| dot3ExtPkgOptIfLowInputPower The lowest optical power monitored at the input during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for ea… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.3 |
| dot3ExtPkgOptIfHighInputPower The highest optical power monitored at the input during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.4 |
| dot3ExtPkgOptIfLowerInputPowerThreshold The lower limit threshold on input power. If
dot3ExtPkgOptIfInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the thr… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.5 |
| dot3ExtPkgOptIfUpperInputPowerThreshold The upper limit threshold on input power. If
dot3ExtPkgOptIfInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the th… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.6 |
| dot3ExtPkgOptIfOutputPower The optical power monitored at the output.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.7 |
| dot3ExtPkgOptIfLowOutputPower The lowest optical power monitored at the output during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.8 |
| dot3ExtPkgOptIfHighOutputPower The highest optical power monitored at the output during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for … | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.9 |