dot3ExtPkgOptIfHighInputPower
DOT3-EPON-MIB ·
.1.3.6.1.2.1.155.1.4.1.5.1.4
Object
The highest optical power monitored at the input during the current 15-minute interval. This object is applicable for an OLT and an ONU. At the OLT, it has a distinct value for each virtual interface.
Context
- MIB
- DOT3-EPON-MIB
- OID
.1.3.6.1.2.1.155.1.4.1.5.1.4- Type
- column
- Access
- readonly
- Status
- current
- Units
- 0.1 dbm
- Parent
- dot3ExtPkgOptIfEntry
- Table
- dot3ExtPkgOptIfTable
- Siblings
- 13
Syntax
0.1 dbm SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3ExtPkgOptIfSuspectedFlag This object is a reliability indication.
If true, the data in this entry may be unreliable.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value f… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.1 |
| dot3ExtPkgOptIfLowerOutputPowerThreshold The lower limit threshold on output power. If
dot3ExtPkgOptIfOutputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the t… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.10 |
| dot3ExtPkgOptIfUpperOutputPowerThreshold The upper limit threshold on output power. If
dot3ExtPkgOptIfOutputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the … | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.11 |
| dot3ExtPkgOptIfSignalDetect When getting true(1), there is a valid optical signal at
the receive that is above the optical power level for
signal detection. When getting false(2) the optical
signal at the r… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.12 |
| dot3ExtPkgOptIfTransmitAlarm When getting true(1) there is a non-valid optical signal
at the transmit of the interface, either a higher level
or lower level than expected. When getting false(2) the
optical s… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.13 |
| dot3ExtPkgOptIfTransmitEnable Setting this object to true(1) will cause the optical
interface to start transmission (according to the
control protocol specified for the logical interface).
Setting this object … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.5.1.14 |
| dot3ExtPkgOptIfInputPower The optical power monitored at the input.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.2 |
| dot3ExtPkgOptIfLowInputPower The lowest optical power monitored at the input during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for ea… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.3 |
| dot3ExtPkgOptIfLowerInputPowerThreshold The lower limit threshold on input power. If
dot3ExtPkgOptIfInputPower drops to this value or below,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the thr… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.5 |
| dot3ExtPkgOptIfUpperInputPowerThreshold The upper limit threshold on input power. If
dot3ExtPkgOptIfInputPower reaches or exceeds this value,
a Threshold Crossing Alert (TCA) should be sent.
Reading will present the th… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.6 |
| dot3ExtPkgOptIfOutputPower The optical power monitored at the output.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface. | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.7 |
| dot3ExtPkgOptIfLowOutputPower The lowest optical power monitored at the output during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for e… | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.8 |
| dot3ExtPkgOptIfHighOutputPower The highest optical power monitored at the output during the
current 15-minute interval.
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for … | column | 0.1 dbm SNMPv2-SMIInteger32 | .1.3.6.1.2.1.155.1.4.1.5.1.9 |