dot3ExtPkgObjectRegisterAction
DOT3-EPON-MIB ·
.1.3.6.1.2.1.155.1.4.1.1.1.6
Object
column
r/w
Enumeration
An object configuring the registration state of an
interface, and indicating its registration state.
Write operation changes the registration state to its new
value.
Read operation returns the value of the state.
The registration state is reflected in this object and in
the dot3MpcpRegistrationState object.
none(1) indicates an unknown state,
register(2) indicates a registered LLID,
deregister(3) indicates a deregistered LLID,
reregister(4) indicates an LLID that is reregistering.
The following list describes the operation of the
interface, as specified in the [802.3ah], when a write
operation is setting a value.
none(1) - not doing any action.
register(2) - registering an LLID that has been requested
for registration (The LLID is in registering mode.
dot3MpcpRegistrationState - registering(2) ).
deregister(3) - deregisters an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
reregister(4) - reregister an LLID that is registered
(dot3MpcpRegistrationState - registered(3) ).
The behavior of an ONU and OLT interfaces, at each one
of the detailed operation at each state, is described in
the registration state machine of figure 64-22,
[802.3ah].
This object is applicable for an OLT and an ONU. At the
OLT, it has a distinct value for each virtual interface.
The write operation is not restricted in this document
and can be done at any time. Changing
dot3ExtPkgObjectRegisterAction state can lead to a change
in the registration state of the respective interface
leading to a deregistration and an interruption of
service of the users connected to the respective EPON
interface.
Context
- MIB
- DOT3-EPON-MIB
- OID
.1.3.6.1.2.1.155.1.4.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dot3ExtPkgControlEntry
- Table
- dot3ExtPkgControlTable
- Siblings
- 5
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | none |
2 | register |
3 | deregister |
4 | reregister |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dot3ExtPkgObjectReset This object is used to reset the EPON interface. The
interface may be unavailable while the reset occurs and
data may be lost.
Setting this object to running(1) will cause the
in… | column | Enumeration | .1.3.6.1.2.1.155.1.4.1.1.1.1 |
| dot3ExtPkgObjectPowerDown This object is used to power down the EPON interface.
The interface may be unavailable while the power down
occurs and data may be lost.
Setting this object to true(1) will cause … | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.155.1.4.1.1.1.2 |
| dot3ExtPkgObjectNumberOfLLIDs A read only object that indicates the number of
registered LLIDs. The initialization value is 0.
This object is applicable for an OLT with the same
value for all virtual interfac… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.155.1.4.1.1.1.3 |
| dot3ExtPkgObjectFecEnabled An object defining the FEC mode of operation of the
interface, and indicating its state. The modes defined in
this object are extensions to the FEC modes defined in
the dot3EponF… | column | Enumeration | .1.3.6.1.2.1.155.1.4.1.1.1.4 |
| dot3ExtPkgObjectReportMaximumNumQueues An object, that defines the maximal number of queues in
the REPORT message as defined in [802.3ah], clause 64. For
further information please see the description of the
queue tab… | column | Unsigned32 | .1.3.6.1.2.1.155.1.4.1.1.1.5 |