agentG8032ProfileHoldOffTimer
DNOS-G8032-PRIVATE-MIB ·
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.4
Object
column
r/w
milliseconds Unsigned32
When a new defect or more severe defect occurs, this event will not be reported immediately to protection switching if the provisioned hold-off timer value is non-zero. Instead, the hold-off timer will be started. When the hold-off timer expires, it will be checked whether a defect still exists on the trail that started the timer. If it does, that defect will be reported to protection switching. Specify holdoff timer value in steps of 100ms.
Context
- MIB
- DNOS-G8032-PRIVATE-MIB
- OID
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Units
- milliseconds
- Parent
- agentG8032ProfileEntry
- Table
- agentG8032ProfileTable
- Siblings
- 5
Syntax
milliseconds Unsigned32
Values & Constraints
Object Constraints
range: 0-10000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agentG8032ProfileName Ethernet ring protection(ERP) profile-name. ERP instance configuration
parameters are defined under profile name. | column | OctetString | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.1 |
| agentG8032ProfileGuardTimer The guard timer is used by all nodes when a clearing condition occurs.
This is the amount of time that an ERP instance discards R-APS messages
before being allowed to process them… | column | milliseconds Unsigned32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.2 |
| agentG8032ProfileWTRTimer This timer is used to avoid toggling protection states in case of
intermittent defects. When the fault condition is cleared, the
traffic channel reverts after the expiry of a WTR … | column | minutes Unsigned32 | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.3 |
| agentG8032ProfileReversionMode This defines Ethernet Ring Protection mode. 2 operation modes are supported:
revertive and non-revertive. In revertive mode, when failures in the link
are removed, the traffic cha… | column | Enumeration | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.5 |
| agentG8032ProfileRowStatus G8032 profile row status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.6 |