DNOS-G8032-PRIVATE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
59
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1 · 1 row entry · 6 columns
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentG8032ProfileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-G8032-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-G8032-PRIVATE-MIB::agentG8032ProfileTable'
A table entries specifying the ERP profile Details.
agentG8032ProfileEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1
Represents an ERP Profile Row.
Column Syntax OID
Ethernet ring protection(ERP) profile-name. ERP instance configuration
parameters are defined under profile name.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.1
The guard timer is used by all nodes when a clearing condition occurs.
This is the amount of time that an ERP instance discards R-APS messages
before being allowed to process them. Specify guard timer value in steps of …
millisecondsUnsigned32r/w
Constraints:
range: 10-2000
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.2
This timer is used to avoid toggling protection states in case of
intermittent defects. When the fault condition is cleared, the
traffic channel reverts after the expiry of a WTR timer(if fault
condition is not present).
minutesUnsigned32r/w
Constraints:
range: 1-12
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.3
When a new defect or more severe defect occurs, this event will
not be reported immediately to protection switching if the provisioned
hold-off timer value is non-zero. Instead, the hold-off timer will be started.
When …
millisecondsUnsigned32r/w
Constraints:
range: 0-10000
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.4
This defines Ethernet Ring Protection mode. 2 operation modes are supported:
revertive and non-revertive. In revertive mode, when failures in the link
are removed, the traffic channel is restored to the working transpor…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.5
G8032 profile row status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.1.1.1.6
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1 · 1 row entry · 6 columns
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentG8032RingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-G8032-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-G8032-PRIVATE-MIB::agentG8032RingTable'
A table entries specifying the ERP ring Details.
agentG8032RingEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1
Represents an ERP port and instance.
Column Syntax OID
This defines G8032 ring name.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1.1
This defines port0 as ring port and to participate
in Ethernet Ring Protection.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1.2
This defines port1 as ring port and to participate
in Ethernet Ring Protection.
IF-MIBInterfaceIndexOrZeror/w
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1.3
Ring is per-port or per-vlan.
RingScoper/w
Type Values:
0perPort
1perVlan
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1.4
Ring is closed(major) or open(sub-ring).
RingTyper/w
Type Values:
1closed
2open
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1.5
G8032 ring row status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.1.1.6
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2 · 1 row entry · 11 columns
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentG8032RingInstanceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-G8032-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-G8032-PRIVATE-MIB::agentG8032RingInstanceTable'
A table entries specifying the ERP Instance Details.
This table has an expansion dependent relationship on the
agentG8032RingTable, each ERP instance is mapped to a ring name.
agentG8032RingInstanceEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1
Represents an ERP Instance Row.
Column Syntax OID
This defines ERP instance.
Unsigned32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.1
This maps ring mode and timer configurations. The default profile
properties gets applied if no profile is associated with an ERP
instance or if the give profile doesn't exists.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.2
This defines the port0 role of the RPL ring node. User has to
make sure that only one ring port is chosen for RPL role.
RPLRoler/w
Type Values:
0normal
1owner
2neighbor
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.3
This defines the port1 role of the RPL ring node. User has to
make sure that only one ring port is chosen for RPL role.
RPLRoler/w
Type Values:
0normal
1owner
2neighbor
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.4
This defines the list of VLANs that are protected by the ERP instance.
DNOS-SWITCHING-MIBVlanListr/w
Type Constraints:
range: 0..512
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.5
This defines CFM Level inside the R-APS messages that the ERP instance
will use for sending and expects to receive. If the node receives an
R-APS message with the improper level then the message will not be
processed. …
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.6
This defines VLAN for transmitted/received RAPS PDUs
for an ERP instance.
Q-BRIDGE-MIBVlanIdOrNoner/w
Type Constraints:
range: 0..4094
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.7
Action performed on this ERP instance.
Enumerationr/w
Enumerated Values:
0none
1clear
2forcedPort0
3forcedPort1
4manualPort0
5manualPort1
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.8
When set to enable(1), statistics of the ERP instance will be reset.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.9
This defines topology change notification propagation for a given ERP instance.
Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.10
G8032 ring instance row status.
Supported values:
active(1) - valid entry
createAndGo(4) - used to create a new entry
destroy(6) - removes the entry
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.2.2.1.11
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1 · 1 row entry · 14 columns
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentG8032RingStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-G8032-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-G8032-PRIVATE-MIB::agentG8032RingStatusTable'
A table entries specifying the ERP status Details.
agentG8032RingStatusEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1
The table includes the status of ERP rings.
Column Syntax OID
The state machine's state of the ERP Instance.
Enumeration
Enumerated Values:
0init
1idle
2protection
3manualSwitch
4forcedSwitch
5pending
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.1
Port0 state.
PortState
Type Values:
1blocking
2forwarding
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.2
Port1 state.
PortState
Type Values:
1blocking
2forwarding
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.3
RPL role of the ring port port0.
RPLRole
Type Values:
0normal
1owner
2neighbor
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.4
RPL role of the ring port port1.
RPLRole
Type Values:
0normal
1owner
2neighbor
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.5
Node ID of the last R-APS message received
over the ring port0.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.6
Blocked port reference (BPR) of the last R-APS
message received over the ring port0.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.7
Node ID of the last R-APS message received
over the ring port1.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.8
Blocked port reference (BPR) of the last R-APS
message received over the ring port1.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.9
Ethernet ring protection(ERP) instance profile-name.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.10
Wait-To-Restore timer value.
minutesUnsigned32
Constraints:
range: 1-12
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.11
Guard timer value.
millisecondsUnsigned32
Constraints:
range: 10-2000
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.12
Hold off timer value.
millisecondsUnsigned32
Constraints:
range: 0-10000
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.13
Revertive or non-revertive mode.
Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.4.1.1.14
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1 · 1 row entry · 22 columns
Uses the dell variant from /opt/observium/mibs/dell.
Command help
Walk agentG8032RingStatisticsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'DNOS-G8032-PRIVATE-MIB' -M '/opt/observium/mibs/dell:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'DNOS-G8032-PRIVATE-MIB::agentG8032RingStatisticsTable'
A table entries specifying the ERP statistics Details.
agentG8032RingStatisticsEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1
The table includes the statistics of ERP rings.
Column Syntax OID
The number of transmitted RAPS NR packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.1
The number of received RAPS NR packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.2
The number of transmitted RAPS NR packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.3
The number of received RAPS NR packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.4
The number of transmitted RAPS NR,RB packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.5
The number of received RAPS NR,RB packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.6
The number of transmitted RAPS NR,RB packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.7
The number of received RAPS NR,RB packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.8
The number of transmitted RAPS SF packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.9
The number of received RAPS SF packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.10
The number of transmitted RAPS SF packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.11
The number of received RAPS FS packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.12
The number of transmitted RAPS MS packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.13
The number of received RAPS MS packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.14
The number of transmitted RAPS MS packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.15
The number of received RAPS MS packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.16
The number of transmitted RAPS FS packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.17
The number of received RAPS FS packets on port0.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.18
The number of transmitted RAPS FS packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.19
The number of received RAPS FS packets on port1.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.20
The number of Failure of Protocol, Provisioning Mismatch (FOP-PM)
event occured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.21
The number of Failure of Protocol, Time Out (FOP-TO)
event occured.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.72.5.1.1.22