rlIgmpMldSnoopVlanRouterPortlist
DLINK-3100-rlBrgMulticast-MIB ·
.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.10
Object
column
Q-BRIDGE-MIBPortList
List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN
Context
- MIB
- DLINK-3100-rlBrgMulticast-MIB
- OID
.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.10- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlIgmpMldSnoopVlanEntry
- Table
- rlIgmpMldSnoopVlanTable
- Siblings
- 33
Syntax
Q-BRIDGE-MIBPortList
- Source
- Q-BRIDGE-MIBPortList
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlIgmpMldSnoopVlanInetAddressType Inet type ipv6/ipv4. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.1 |
| rlIgmpMldSnoopVlanRouterStaticPortlist List of router ports configured statically on this VLAN. | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.11 |
| rlIgmpMldSnoopVlanRouterForbiddenPortlist List of ports statically configured to NOT
be router ports on this VLAN | column | Q-BRIDGE-MIBPortList | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.12 |
| rlIgmpMldSnoopVlanQueryOverride Enable/Disable overriding of Query values | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.13 |
| rlIgmpMldSnoopVlanOperRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are r… | column | Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.14 |
| rlIgmpMldSnoopVlanOperQueryInterval The frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value. | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.15 |
| rlIgmpMldSnoopVlanOperQueryMaxResponseTime The maximum query response interval advertised in MGMDv2
or v3 queries on this interface. | column | tenths of seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.16 |
| rlIgmpMldSnoopVlanOperLastMemberQueryInterval The Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time bet… | column | tenths of seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.17 |
| rlIgmpMldSnoopVlanOperLastMemberQueryCount Represents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members. | column | Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.18 |
| rlIgmpMldSnoopVlanOperStartupQueryCount Represents the number of Queries sent out on startup
separated by the Startup Query Interval. | column | Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.19 |
| rlIgmpMldSnoopVlanTag The tag of the VLAN for which this entry contains
information for an IP Multicast Router. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.2 |
| rlIgmpMldSnoopVlanOperStartupQueryInterval This variable represents the interval between General
Queries sent by a Querier on startup. | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.20 |
| rlIgmpMldSnoopVlanOperHostTimeOut The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldSnoo… | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.21 |
| rlIgmpMldSnoopVlanOperRouterTimeOut The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanOperRobustness *
rlIgmpMldS… | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.22 |
| rlIgmpMldSnoopVlanOperLeaveTimeOut The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.… | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.23 |
| rlIgmpMldSnoopVlanAdminRobustness The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to be
lossy, the Robustness Variable may be increased. IGMP and
MLD are r… | column | Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.24 |
| rlIgmpMldSnoopVlanAdminQueryInterval The frequency at which IGMP or MLD Host-Query packets are
transmitted on this interface. This variable must be a
non-zero value. | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.25 |
| rlIgmpMldSnoopVlanAdminQueryMaxResponseTime The maximum query response interval advertised in MGMDv2
or v3 queries on this interface. | column | tenths of seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.26 |
| rlIgmpMldSnoopVlanAdminLastMemberQueryInterval The Last Member Query Interval is the Max Query Response
Interval inserted into group-specific queries sent in
response to leave group messages, and is also the amount
of time bet… | column | tenths of seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.27 |
| rlIgmpMldSnoopVlanAdminLastMemberQueryCount Represents the number of group-specific and
group-and-source-specific queries sent by the router before
it assumes there are no local members. | column | Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.28 |
| rlIgmpMldSnoopVlanAdminStartupQueryCount Represents the number of Queries sent out on startup
separated by the Startup Query Interval. | column | Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.29 |
| rlIgmpMldSnoopVlanEnable Enable/Disable IGMP Snooping in the vlan. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.3 |
| rlIgmpMldSnoopVlanAdminStartupQueryInterval This variable represents the interval between General
Queries sent by a Querier on startup. | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.30 |
| rlIgmpMldSnoopVlanAdminHostTimeOut The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMldSno… | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.31 |
| rlIgmpMldSnoopVlanAdminRouterTimeOut The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan.
DEFVAL { rlIgmpMldSnoopVlanAdminRobustness *
rlIgmpMld… | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.32 |
| rlIgmpMldSnoopVlanAdminLeaveTimeOut The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry.… | column | seconds Unsigned32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.33 |
| rlIgmpMldSnoopVlanIsImmediateLeave Enable/Disable immediate leave on this Vlan | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.34 |
| rlIgmpMldSnoopVlanRouterLearn Enable/Disable of Learning of routers in the vlan. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.4 |
| rlIgmpMldSnoopVlanHostTimeOut obsolete The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan. | column | seconds Integer32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.5 |
| rlIgmpMldSnoopVlanQuerierTimeOut obsolete The amount of time where no query is heard until
querier is activated | column | seconds Integer32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.6 |
| rlIgmpMldSnoopVlanRouterTimeOut obsolete The amount of time that should pass before aging out
a port in the router ports dynamically learnt for
this vlan. | column | seconds Integer32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.7 |
| rlIgmpMldSnoopVlanLeaveTimeOut obsolete The amount of time that should pass before aging out
an entry in the rlIgmpSnoopMembershipTable for this vlan,
after recieving a leave/exclude message from the port of
the entry. | column | seconds Integer32 | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.8 |
| rlIgmpMldSnoopVlanIgmpVersion The current IGMP protocol version running on the VLAN. | column | IgmpVersion | .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.9 |