DLINK-3100-rlBrgMulticast-MIB Table View

The table listing the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.

rlIgmpSnoopVlanEntry row .1.3.6.1.4.1.171.10.94.89.89.55.2.7.1

An entry (conceptual row) in the rlIgmpSnoopVlanTable.

Indexes

rlIgmpSnoopVlanTag

Column	Syntax	OID
rlIgmpSnoopVlanTag The tag of the VLAN for which this entry contains information for an IP Multicast Router.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.1
rlIgmpSnoopVlanEnable Enable/Disable IGMP Snooping in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.2
rlIgmpSnoopVlanRouterLearn Enable/Disable of Learning of routers in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.3
rlIgmpSnoopVlanHostTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.4
rlIgmpSnoopVlanQuerierTimeOut The amount of time where no query is heard until querier is activated	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.5
rlIgmpSnoopVlanRouterTimeOut The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.6
rlIgmpSnoopVlanLeaveTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.7
rlIgmpSnoopVlanIgmpVersion The current IGMP protocol version running on the VLAN.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.8
rlIgmpSnoopVlanRouterPortlist List of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.55.2.7.1.9

multicast vlan used for this port

rlIgmpSnoopMulticastTvEntry row .1.3.6.1.4.1.171.10.94.89.89.55.2.10.1

entry of multicast ip

Indexes

rlIgmpSnoopMulticastTvVID rlIgmpSnoopMulticastTvGroup

Column	Syntax	OID
rlIgmpSnoopMulticastTvVID Specify the multicast ip to be used.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.1
rlIgmpSnoopMulticastTvGroup Specify the multicast ip to be used.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.2
rlIgmpSnoopMulticastTvStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.55.2.10.1.3

The table listing the IP multicast memberships.

rlIgmpSnoopMembershipEntry row .1.3.6.1.4.1.171.10.94.89.89.55.2.11.1

An entry (conceptual row) in the rlIgmpSnoopMembershipTable.

Indexes

rlIgmpSnoopMembershipVlanTag rlIgmpSnoopMembershipGroupIpAddress rlIgmpSnoopMembershipSourceIpAddress

Column	Syntax	OID
rlIgmpSnoopMembershipVlanTag The VLAN tag for which this entry contains multicast membership information.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.1
rlIgmpSnoopMembershipGroupIpAddress The multicast group address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.2
rlIgmpSnoopMembershipSourceIpAddress The unicast source address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.3
rlIgmpSnoopMembershipIncPortlist Included ports, where a report message was heard for the group (IGMP version 2|1) or group and source address (IGMP version 3).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.4
rlIgmpSnoopMembershipExcPortlist Excluded ports where an exclude report message was heard for the group and source address (IGMP version 3).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.5
rlIgmpSnoopMembershipExpiryTimeobsolete Time till entry will expire.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.6
rlIgmpSnoopMembershipCompatibilityMode IGMP group compatibility mode.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.2.11.1.7

A table that contains IGMP Snooping Querier information about
every vlan. This is indexed by vlan tag.

rlIgmpSnoopQuerierVlanEntry row .1.3.6.1.4.1.171.10.94.89.89.55.2.12.1

An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable.

Indexes

rlIgmpSnoopQuerierVlanTag

Column	Syntax	OID
rlIgmpSnoopQuerierVlanTag An IGMP Snoop Querier entry vlan tag.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.1
rlIgmpSnoopQuerierAdminEnable The desired administrative state of IGMP Snoop Querier on the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.2
rlIgmpSnoopQuerierOperEnable The current operational state of IGMP Snoop Querier on the vlan.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.3
rlIgmpSnoopQuerierAdminAddr The desired IP address is being used in IGMP Snoop Querier messages on the vlan.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.4
rlIgmpSnoopQuerierOperAddr The current operational IP address is being used in IGMP Snoop Querier messages on the vlan.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.5
rlIgmpSnoopQuerierAdminVersionNumber The highest version number of IGMP Snoop Querier for the vlan.	IgmpVersionr/w Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.6
rlIgmpSnoopQuerierOperVersionNumber The current operational version number of IGMP Snoop Querier for the vlan.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.2.12.1.7

The table listing the IP multicast memberships.

rlIgmpMldSnoopMembershipEntry row .1.3.6.1.4.1.171.10.94.89.89.55.5.4.1

An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable.

Indexes

rlIgmpMldSnoopMembershipVlanTag rlIgmpMldSnoopMembershipGroupIpAddressType rlIgmpMldSnoopMembershipGroupIpAddress rlIgmpMldSnoopMembershipSourceIpAddressType rlIgmpMldSnoopMembershipSourceIpAddress

Column	Syntax	OID
rlIgmpMldSnoopMembershipVlanTag The VLAN tag for which this entry contains multicast membership information.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.1
rlIgmpMldSnoopMembershipGroupIpAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.2
rlIgmpMldSnoopMembershipGroupIpAddress The multicast group address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.3
rlIgmpMldSnoopMembershipSourceIpAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.4
rlIgmpMldSnoopMembershipSourceIpAddress The unicast source address.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.5
rlIgmpMldSnoopMembershipIncPortlist Included ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.6
rlIgmpMldSnoopMembershipExcPortlist list of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ).	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.7
rlIgmpMldSnoopMembershipExpiryTimeobsolete Time till entry will expire.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.8
rlIgmpMldSnoopMembershipCompatibilityMode IGMP/MLD group compatibility mode.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.5.4.1.9

The table lists the per vlan parameters : enable/disable ,
aging-out timers , filter ports and permanent ports.

rlIgmpMldSnoopVlanEntry row .1.3.6.1.4.1.171.10.94.89.89.55.5.5.1

An entry (conceptual row) in the rlIgmpSnoopVlanTable.

Indexes

rlIgmpMldSnoopVlanInetAddressType rlIgmpMldSnoopVlanTag

Column	Syntax	OID
rlIgmpMldSnoopVlanInetAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.1
rlIgmpMldSnoopVlanTag The tag of the VLAN for which this entry contains information for an IP Multicast Router.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.2
rlIgmpMldSnoopVlanEnable Enable/Disable IGMP Snooping in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.3
rlIgmpMldSnoopVlanRouterLearn Enable/Disable of Learning of routers in the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.4
rlIgmpMldSnoopVlanHostTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.	secondsInteger32r/w Constraints: range: 60-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.5
rlIgmpMldSnoopVlanQuerierTimeOutobsolete The amount of time where no query is heard until querier is activated	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.6
rlIgmpMldSnoopVlanRouterTimeOutobsolete The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.	secondsInteger32r/w Constraints: range: 1-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.7
rlIgmpMldSnoopVlanLeaveTimeOutobsolete The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.	secondsInteger32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.8
rlIgmpMldSnoopVlanIgmpVersion The current IGMP protocol version running on the VLAN.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.9
rlIgmpMldSnoopVlanRouterPortlist List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.10
rlIgmpMldSnoopVlanRouterStaticPortlist List of router ports configured statically on this VLAN.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.11
rlIgmpMldSnoopVlanRouterForbiddenPortlist List of ports statically configured to NOT be router ports on this VLAN	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.12
rlIgmpMldSnoopVlanQueryOverride Enable/Disable overriding of Query values	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.13
rlIgmpMldSnoopVlanOperRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet …	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.14
rlIgmpMldSnoopVlanOperQueryInterval The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.	secondsUnsigned32 Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.15
rlIgmpMldSnoopVlanOperQueryMaxResponseTime The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.	tenths of secondsUnsigned32 Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.16
rlIgmpMldSnoopVlanOperLastMemberQueryInterval The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Thi…	tenths of secondsUnsigned32 Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.17
rlIgmpMldSnoopVlanOperLastMemberQueryCount Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.18
rlIgmpMldSnoopVlanOperStartupQueryCount Represents the number of Queries sent out on startup separated by the Startup Query Interval.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.19
rlIgmpMldSnoopVlanOperStartupQueryInterval This variable represents the interval between General Queries sent by a Querier on startup.	secondsUnsigned32 Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.20
rlIgmpMldSnoopVlanOperHostTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval + rlIgm…	secondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.21
rlIgmpMldSnoopVlanOperRouterTimeOut The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval }	secondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.22
rlIgmpMldSnoopVlanOperLeaveTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanOperLastMem…	secondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.23
rlIgmpMldSnoopVlanAdminRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet …	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.24
rlIgmpMldSnoopVlanAdminQueryInterval The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.	secondsUnsigned32r/w Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.25
rlIgmpMldSnoopVlanAdminQueryMaxResponseTime The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.	tenths of secondsUnsigned32r/w Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.26
rlIgmpMldSnoopVlanAdminLastMemberQueryInterval The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Thi…	tenths of secondsUnsigned32r/w Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.27
rlIgmpMldSnoopVlanAdminLastMemberQueryCount Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.28
rlIgmpMldSnoopVlanAdminStartupQueryCount Represents the number of Queries sent out on startup separated by the Startup Query Interval.	Unsigned32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.29
rlIgmpMldSnoopVlanAdminStartupQueryInterval This variable represents the interval between General Queries sent by a Querier on startup.	secondsUnsigned32r/w Constraints: range: 0-31744	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.30
rlIgmpMldSnoopVlanAdminHostTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval + rlI…	secondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.31
rlIgmpMldSnoopVlanAdminRouterTimeOut The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval }	secondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.32
rlIgmpMldSnoopVlanAdminLeaveTimeOut The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanAdminLastMe…	secondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.33
rlIgmpMldSnoopVlanIsImmediateLeave Enable/Disable immediate leave on this Vlan	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.5.5.1.34

multicast vlan used for this port

rlIgmpMldSnoopMulticastTvEntry row .1.3.6.1.4.1.171.10.94.89.89.55.5.6.1

entry of multicast ip

Indexes

rlIgmpMldSnoopMulticastTvInetAddressType rlIgmpMldSnoopMulticastTvVID rlIgmpMldSnoopMulticastTvGroupAddressType rlIgmpMldSnoopMulticastTvGroup

Column	Syntax	OID
rlIgmpMldSnoopMulticastTvInetAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.1
rlIgmpMldSnoopMulticastTvVID Specify the multicast ip to be used.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.2
rlIgmpMldSnoopMulticastTvGroupAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.3
rlIgmpMldSnoopMulticastTvGroup Specify the multicast ip to be used.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.4
rlIgmpMldSnoopMulticastTvStatus The row status variable, used according to row installation and removal conventions.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.55.5.6.1.5

A table that contains IGMP/MLD Snooping Querier information about
every vlan. This is indexed by vlan tag.

rlIgmpMldSnoopQuerierVlanEntry row .1.3.6.1.4.1.171.10.94.89.89.55.5.7.1

An entry (conceptual row) in the rlIgmpMldSnoopQuerierVlanTable.

Indexes

rlIgmpMldSnoopQuerierVlanTag

Column	Syntax	OID
rlIgmpMldSnoopQuerierVlanTag An IGMP/MLD Snoop Querier entry vlan tag.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.1
rlIgmpMldSnoopQuerierAdminEnable The desired administrative state of IGMP/MLD Snoop Querier on the vlan.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.2
rlIgmpMldSnoopQuerierOperEnable The current operational state of IGMP/MLD Snoop Querier on the vlan.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.3
rlIgmpMldSnoopQuerierAdminAddrInetAddressType Inet type IPv6/IPv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.4
rlIgmpMldSnoopQuerierAdminAddr The desired IP address is being used in IGMP/MLD Snoop Querier messages on the vlan.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.5
rlIgmpMldSnoopQuerierOperAddrInetAddressType Inet type IPv6/IPv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.6
rlIgmpMldSnoopQuerierOperAddr The current operational IP address is being used in IGMP/MLD Snoop Querier messages on the vlan.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.7
rlIgmpMldSnoopQuerierAdminVersionNumber The highest version number of IGMP Snoop Querier for the vlan.	IgmpVersionr/w Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.8
rlIgmpMldSnoopQuerierOperVersionNumber The current operational version number of IGMP Snoop Querier for the vlan.	IgmpVersion Type Values: 0 none 1 v1 2 v2 3 v3	.1.3.6.1.4.1.171.10.94.89.89.55.5.7.1.9

A table containing filtering information for IP Multicast
addresses for each VLAN.

rlBrgStaticIpMulticastEntry row .1.3.6.1.4.1.171.10.94.89.89.116.3.1

Filtering information configured into the device.
The set of ports to which frames containing this IP
Multicast destination address and IP source address
are allowed to be forwarded.

Indexes

rlBrgStaticIpMulticastVlanTag rlBrgStaticIpMulticastGroupAddress rlBrgStaticIpMulticastSourceAddress

Column	Syntax	OID
rlBrgStaticIpMulticastVlanTag The VLAN tag for which this entry is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.116.3.1.1
rlBrgStaticIpMulticastGroupAddress The multicast group address for which the filtering information applies	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.116.3.1.2
rlBrgStaticIpMulticastSourceAddress The unicast group address for which the filtering information applies.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.116.3.1.3
rlBrgStaticIpMulticastFrwPorts The ports the data should be forwarded to	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.116.3.1.4
rlBrgStaticIpMulticastForbiddenPorts The ports that overrides dynamic configuration and prevents multicast data forwarding for the group or group and source to these ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.116.3.1.5
rlBrgStaticIpMulticastStatus The status of the table entry. It's used to add/delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.116.3.1.6

A table containing all filtering information for IP
Multicast addresses for each VLAN

rlBrgIpMulticastEntry row .1.3.6.1.4.1.171.10.94.89.89.116.4.1

An entry (conceptual row) in the rlBrgIpMulticastTable
contains IP Multicast FDB data

Indexes

rlBrgIpMulticastVlanTag rlBrgIpMulticastGroupAddress rlBrgIpMulticastSourceAddress

Column	Syntax	OID
rlBrgIpMulticastVlanTag The VLAN tag for which this entry is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.116.4.1.1
rlBrgIpMulticastGroupAddress Multicast group address (destination address) of data frames	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.116.4.1.2
rlBrgIpMulticastSourceAddress Unicast source address of data frames.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.10.94.89.89.116.4.1.3
rlBrgIpMulticastEgressPorts The complete set of ports, in this VLAN, to which frames destined for this Group IP address or Group and Source address are currently being explicitly forwarded. This does not include ports for which this address is on…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.116.4.1.4
rlBrgIpMulticastLearntPorts The subset of ports in rlBrgIpMulticastEgressPorts which were learnt by IGMP or some other dynamic mechanism, in this Filtering database..	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.116.4.1.5

A table containing filtering information for INET (Pv4 and IPv6)
Multicast addresses for each VLAN.

rlBrgStaticInetMulticastEntry row .1.3.6.1.4.1.171.10.94.89.89.116.5.1

Filtering information configured into the device.
The set of ports to which frames containing this IP
Multicast destination address and IP source address
are allowed to be forwarded.

Indexes

rlBrgStaticInetMulticastVlanTag rlBrgStaticInetMulticastGroupAddressType rlBrgStaticInetMulticastGroupAddress rlBrgStaticInetMulticastSourceAddressType rlBrgStaticInetMulticastSourceAddress

Column	Syntax	OID
rlBrgStaticInetMulticastVlanTag The VLAN tag for which this entry is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.1
rlBrgStaticInetMulticastGroupAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.2
rlBrgStaticInetMulticastGroupAddress The multicast group address for which the filtering information applies	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.3
rlBrgStaticInetMulticastSourceAddressType Inet type ipv6/ipv4.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.4
rlBrgStaticInetMulticastSourceAddress The unicast group address for which the filtering information applies.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.5
rlBrgStaticInetMulticastFrwPorts The ports the data should be forwarded to	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.6
rlBrgStaticInetMulticastForbiddenPorts The ports that overrides dynamic configuration and prevents multicast data forwarding for the group or group and source to these ports.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.7
rlBrgStaticInetMulticastStatus The status of the table entry. It's used to add/delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.10.94.89.89.116.5.1.8

A table containing all filtering information for IP
Multicast addresses for each VLAN

rlBrgInetMulticastEntry row .1.3.6.1.4.1.171.10.94.89.89.116.6.1

An entry (conceptual row) in the rlBrgInetMulticastTable
contains IP Multicast FDB data

Indexes

rlBrgInetMulticastVlanTag rlBrgInetMulticastGroupAddressType rlBrgInetMulticastGroupAddress rlBrgInetMulticastSourceAddressType rlBrgInetMulticastSourceAddress

Column	Syntax	OID
rlBrgInetMulticastVlanTag The VLAN tag for which this entry is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.1
rlBrgInetMulticastGroupAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.2
rlBrgInetMulticastGroupAddress Multicast group address (destination address) of data frames	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.3
rlBrgInetMulticastSourceAddressType Inet type IPv4/IPv6.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.4
rlBrgInetMulticastSourceAddress Unicast source address of data frames.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.5
rlBrgInetMulticastEgressPorts The complete set of ports, in this VLAN, to which frames destined for this Group IP address or Group and Source address are currently being explicitly forwarded. This does not include ports for which this address is on…	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.6
rlBrgInetMulticastLearntPorts The subset of ports in rlBrgIpMulticastEgressPorts which were learnt by IGMP or some other dynamic mechanism, in this Filtering database..	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.116.6.1.7

A table containing all information stored in
IPM FDB overlapping Reference Table

rlBrgIpmFdbRefEntry row .1.3.6.1.4.1.171.10.94.89.89.116.7.1

An entry (conceptual row) in the rlBrgIpmFdbRefTable
contains overlapping Reference Table FDB data

Indexes

rlBrgIpmFdbRefVlanTag rlBrgIpmFdbRefGroupAddressType rlBrgIpmFdbRefGroupAddress rlBrgIpmFdbRefSourceAddressType rlBrgIpmFdbRefSourceAddress

Column	Syntax	OID
rlBrgIpmFdbRefVlanTag The VLAN tag for which this entry is configured.	Q-BRIDGE-MIBVlanIndex	.1.3.6.1.4.1.171.10.94.89.89.116.7.1.1
rlBrgIpmFdbRefGroupAddressType Multicast group address (destination address) of data frames	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.7.1.2
rlBrgIpmFdbRefGroupAddress Multicast group address (destination address) of data frames	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.7.1.3
rlBrgIpmFdbRefSourceAddressType Unicast source address of data frames.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.7.1.4
rlBrgIpmFdbRefSourceAddress Unicast source address of data frames.	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.7.1.5
rlBrgIpmFdbRefPorts The list of ports represented in IPM FDB overlapping Reference Table	Q-BRIDGE-MIBPortList	.1.3.6.1.4.1.171.10.94.89.89.116.7.1.6

The (conceptual) table for Dynamic IPM FDB command. For debugging purposes
only. This MIB is prohibited to be used with working IGMP/MLD snooping

rlBrgDynamicCmdEntry row .1.3.6.1.4.1.171.10.94.89.89.116.8.1

An entry (conceptual row) in the rlBrgDynamicCmdTable.

Indexes

rlBrgDynamicCmdKey

Column	Syntax	OID
rlBrgDynamicCmdKey Key of the rlBrgDynamicCmdTable table	Integer32 Constraints: range: 1-1	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.1
rlBrgDynamicCmdVlanTag The VLAN tag for which this entry is configured.	Q-BRIDGE-MIBVlanIndexr/w	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.2
rlBrgDynamicCmdGroupAddressType Multicast group address (destination address) of data frames	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.3
rlBrgDynamicCmdGroupAddress Multicast group address (destination address) of data frames	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.4
rlBrgDynamicCmdSourceAddressType Unicast source address of data frames.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.5
rlBrgDynamicCmdSourceAddress Unicast source address of data frames.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.6
rlBrgDynamicCmdPorts The list of ports for them the command is issued	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.7
rlBrgDynamicCmdType Current type of command	DynamicCmdTyper/w Type Values: 0 createEntry 1 deleteEntry 2 addPorts 3 deletePorts	.1.3.6.1.4.1.171.10.94.89.89.116.8.1.8