rlPolicyServiceClassActivePriority
DLINK-3100-POLICY-MIB ·
.1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.6
Object
column
Integer32
If non-zero, this service class will operate as a priority service class with the specified priority value. This object can not be set in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case rlServiceClassPhbType should be used instead. It can't be set when rlBoundedPriorityQueueSupport = notSupported as well.
Context
- MIB
- DLINK-3100-POLICY-MIB
- OID
.1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rlPolicyServiceClassActiveEntry
- Table
- rlPolicyServiceClassActiveTable
- Siblings
- 22
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicyServiceClassActiveIndex This enumerates the ServiceClass Active entry. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.1 |
| rlPolicyServiceClassActiveTdThersholdDp2 Tail Drop Threshold for Drop Precedence 2.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.10 |
| rlPolicyServiceClassActiveRedMinDp0 WRED Min Threshold for Drop Precedence 0.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.11 |
| rlPolicyServiceClassActiveRedMaxDp0 WRED Max Threshold for Drop Precedence 0.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.12 |
| rlPolicyServiceClassActiveRedProbDp0 WRED probability for Drop Precedence 0. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.13 |
| rlPolicyServiceClassActiveRedMinDp1 WRED Min Threshold for Drop Precedence 1.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.14 |
| rlPolicyServiceClassActiveRedMaxDp1 WRED Max Threshold for Drop Precedence 1.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.15 |
| rlPolicyServiceClassActiveRedProbDp1 WRED probability for Drop Precedence 1. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.16 |
| rlPolicyServiceClassActiveRedMinDp2 WRED Min Threshold for Drop Precedence 2.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.17 |
| rlPolicyServiceClassActiveRedMaxDp2 WRED Max Threshold for Drop Precedence 2.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.18 |
| rlPolicyServiceClassActiveRedProbDp2 WRED probability for Drop Precedence 2. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.19 |
| rlPolicyServiceClassActiveName The name given by the system administrator to the class. | column | OctetString | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.2 |
| rlPolicyServiceClassActiveRedQweight additional parameter for the WRED algorithem supporting
the Queue weight exponentail factor | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.20 |
| rlPolicyServiceClassActiveShaperStatus If there is shaper on the Queue | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.21 |
| rlPolicyServiceClassActiveCirQueueShaper The CIR for the queue shaper.
N/A when the shper is disabled
UNITS bps bits per second | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.22 |
| rlPolicyServiceClassActiveCbsQueueShaper The CBS for the queue shaper.
N/A when the shper is disabled.
UNITS bytes | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.23 |
| rlPolicyServiceClassActivePhbType Indicates the type of Diffserv per-hop behaviour that this service
class is intended to support. This object can be set by the user
only in DiffServ mode (i.e. rlDiffservModeEnabl… | column | Enumeration | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.3 |
| rlPolicyServiceClassActiveMinRate Specifies either the minimum throughput of the queue as a percentage
of the throughput of each output port on which the service class is
implemented. If zero, there is no minimu… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.4 |
| rlPolicyServiceClassActiveMaxRate Specifies either the upper limit on the throughput of the queue as a
percentage of the throughput of each output port on which the service
class is implemented. If zero, there i… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.5 |
| rlPolicyServiceClassActive8021DPri 802.1D Priority Tag that will be written to routed packets and
untagged bridged packets transmitted with this service class. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.7 |
| rlPolicyServiceClassActiveTdThersholdDp0 Tail Drop Threshold for Drop Precedence 0.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.8 |
| rlPolicyServiceClassActiveTdThersholdDp1 Tail Drop Threshold for Drop Precedence 1.
UNITS percent 0-100 | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.9 |