DLINK-3100-POLICY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
26
Rows
26
Columns
234

rlPolicyFlowClassificationOffsetsTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.2.2 · 1 row entry · 11 columns
Open in standard view 
Specifies the byte offsets that the platform can use for
policy decisions.  This table is used for platforms
which impose limitations on choosing the OMPCs for classification.
If the platform does not impose any limitations, the value of
rlPolicyFlowClassificationOffsetsGroupScheme is allOffsetsPermitted.
Each entry in the table specifies a combination of byte offsets
which can be used to specify flow classification.  A rule may
use a subset of the bytes of its Offset Group.
The maximum value for each offset is given by
rlPolicyFlowClassificationOffsetGroupMaximumOffset.
The maximum number of offsets per Offset Group is given by
rlPolicyNumberOfOffsetsPerFlowClassificationOffsetGroup.
rlPolicyFlowClassificationOffsetsGroupEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1
The flow classification offset table entry includes the
following parameters
Indexes
rlPolicyFlowClassificationOffsetsGroupType
Column Syntax OID
rlPolicyFlowClassificationOffsetsGroupType
Specifies a classifier type for which offset bytes can be specified.
RlPolicyGroupType
Textual Convention: RlPolicyGroupType Enumeration
Type Values:
1bridged
2routedIp
3routedIpx
4notUsed
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.1
rlPolicyFlowClassificationOffsetsGroupOffset
The list of offsets to be included in the Flow Classification Offset
Group are specified as subidentifiers in the OID(after the first 2
bytes which must be 1.1). The maximal number of permissible offsets
is given by rlP…
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.2
rlPolicyFlowClassificationOffsetsGroupOffsetType
Indicates whether the corresponding byte denotes an offset from beginning
of L2, from the beginning of L3 IPv4 packet data or from the beginning
of L3 IPv6 packet data.
Each byte in the OID contains either:
(1) - L2 …
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.3
rlPolicyFlowClassificationOffsetsGroupMask
The list of masks corresponding to the offsets to be included in the
Flow Classification Offset Group are specified as bytes in the
OID(after the first 2 bytes which must be 1.1).
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.4
rlPolicyFlowClassificationOffsetsGroupUseInputInterface
Indicates whether or not the Input Interface Index is usable
in Policy Rule definitions.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.5
rlPolicyFlowClassificationOffsetsGroupUseOutputInterface
Indicates whether or not the Output Interface Index(ie.
routing/bridging decision) is usable in Policy Rule definitions
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.6
rlPolicyFlowClassificationOffsetsGroupUseVlanId
Indicates whether or not the VlanId is usable in Policy Rule
definitions for bridged packets
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.7
rlPolicyFlowClassificationOffsetsGroupStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.8
rlPolicyFlowClassificationOffsetsGroupUseVPTId
Indicates whether or not the VPT is usable in Policy Rule
definitions for bridged packets
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.9
rlPolicyFlowClassificationOffsetsGroupUseEtherTypeId
Indicates whether or not the EtherType is usable in Policy Rule
definitions for bridged packets
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.10
rlPolicyFlowClassificationOffsetsGroupUseInnerVlanId
Indicates whether or not the inner VlanId is usable in Policy Rule
definitions for bridged packets
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.2.2.1.11

rlPolicyOMPCTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.2.3 · 1 row entry · 9 columns
Open in standard view 
The table of OMPC statements.
rlPolicyOMPCEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1
Each classification statement consists of the following parameters
Indexes
rlPolicyOMPCGroupType rlPolicyOMPCIndex
Column Syntax OID
rlPolicyOMPCGroupType
Specifies a classifier type for which offset bytes can be specified.
RlPolicyGroupType
Textual Convention: RlPolicyGroupType Enumeration
Type Values:
1bridged
2routedIp
3routedIpx
4notUsed
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.1
rlPolicyOMPCIndex
Index into the OMPC Table.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.2
rlPolicyOMPCOffset
Specifies the offset within the frame (in bytes) from the layer
according to rlPolicyGroupType. The limitation of this field is
according to the rlPolicyFlowClassificationOffsetGroupMaximumOffset
parameter if this OMPC …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.3
rlPolicyOMPCOffsetType
Indicates whether the offset should be interpreted as relative to the
beginning of L2 or the beginning of L3
Enumerationr/w
Enumerated Values:
1l2
2l3
3l3-ipv6
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.4
rlPolicyOMPCMask
Specifies which bits of the rlPolicyOMPCPattern field are
significant for packet comparison. The length of the mask,
in case of 'bigger' or 'smaller' rlPolicyOMPCCondition,
is limited by rlPolicyMaxOMPCLengthForBiggerS…
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.5
rlPolicyOMPCPattern
Describes the mask field. The length of this object must be equal
to the length of rlPolicyOMPCMask.
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.6
rlPolicyOMPCCondition
These define the operation carried out on the two 'operands'
(frame and pattern), i.e. Bigger means that frame bits should be
bigger than pattern bits. The permitted values are according to
rlPolicyOMPCPermittedOperator…
Enumerationr/w
Enumerated Values:
1equal
2notEqual
3bigger
4smaller
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.7
rlPolicyOMPCDescription
Free text specifing the nature of this OMPC.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.8
rlPolicyOMPCStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.2.3.1.9

rlPolicyClassifierTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.2.4 · 1 row entry · 15 columns
Open in standard view 
The table of Classifier statement.
rlPolicyClassifierEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1
Classifiers can be of the ingress, egress, or post-routing phase
varieties.
Each multifield classification statement consists of the
following parameters.
Indexes
rlPolicyClassifierType rlPolicyClassifierIndex
Column Syntax OID
rlPolicyClassifierType
Specifies a classifier type for which offset bytes can be specified.
RlPolicyGroupType
Textual Convention: RlPolicyGroupType Enumeration
Type Values:
1bridged
2routedIp
3routedIpx
4notUsed
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.1
rlPolicyClassifierIndex
Index into the Classifier Table.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.2
rlPolicyClassifierOmpcList
The list of OMPCs to check with this Classifier. Each
subidentifier together with rlPolicyClassifierType specify one OMPC.
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.3
rlPolicyClassifierInIfIndex
Input interface index to be compared with received packet,
a value of 0 denotes that the classifier is applied to all ports.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.4
rlPolicyClassifierOutIfIndex
Output interface index to be compared with sent packet,
a value of 0 denotes that the classifier is applied to all ports.
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.5
rlPolicyClassifierVID
VLAN ID, used only for bridged traffic.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.6
rlPolicyClassifierDiffservInIfType
For a classifier used by the Diffserv Rules table. Enables
specification of a classifier that should apply to all
Diffserv boundary ports or all Diffserv Interior ports.
If normal is specified, the rlPolicyClassifierIn…
RlPolicyClassifierDiffservIfTyper/w
Textual Convention: RlPolicyClassifierDiffservIfType Enumeration
Type Values:
1normal
2allBoundaryPorts
3allInteriorPorts
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.7
rlPolicyClassifierDiffservOutIfType
For a classifier used by the Diffserv Rules table. Enables
specification of a classifier that should apply to outbound
traffic on all Diffserv boundary ports or all Diffserv Interior
ports.
If normal is specified, the …
RlPolicyClassifierDiffservIfTyper/w
Textual Convention: RlPolicyClassifierDiffservIfType Enumeration
Type Values:
1normal
2allBoundaryPorts
3allInteriorPorts
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.8
rlPolicyClassifierStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.9
rlPolicyClassifierInIfIndexList
allow to define list of ports for the specific classifier
for ingress classification. if rlPolicyClassifierInIfIndex equal to zero
then the following list should be reffered , if the list is empty we refer
to ALL Ports
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.10
rlPolicyClassifierOutIfIndexList
allow to define list of ports for the specific classifier
for egress classification. if rlPolicyClassifierOutIfIndex equal to zero
then the following list should be reffered , if the list is empty we refer
to ALL Ports
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.11
rlPolicyClassifierVPTID
VPT ID - user priority tag to be compared with .
8 is used to indicate not used value for this classifier
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.12
rlPolicyClassifierVPTIDMask
VPT ID Mask ,mask the user priority field .
0 is the default indicate Mask all compared with any VPT value
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.13
rlPolicyClassifierEtherTypeID
EtherType ID, to be compared with.
65535 is used to indicate not used value for this classifier
1499 is uded to indicate IPv4 ethertype that is originated from IPv4 ACL with permit/deny any any any
1500 is uded to indic…
Integer32r/w
Constraints:
range: 1499-65536
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.14
rlPolicyClassifierInnerVID
INNER VLAN ID, used only for double tagged traffic.
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.15

rlPolicyRulesTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.3.2 · 1 row entry · 14 columns
Open in standard view 
The table of rules and Rules statements applied to all incoming traffic
at the post-routing phase - ie. both the inPort and outPort are
available for classification
When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option
for Diffserv is off), certain table parameters are not available(see
below). The DiffServ option is enabled or disabled by setting
rlDiffservModeEnabled.
rlPolicyRulesEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1
Each multifield classification statement consists of the following
parameters.
Indexes
rlPolicyRulesTableType rlPolicyRulesInterfaceDirection rlPolicyRulesIndex
Column Syntax OID
rlPolicyRulesTableType
Specifies a classifier type for which offset bytes can be specified.
RlPolicyGroupType
Textual Convention: RlPolicyGroupType Enumeration
Type Values:
1bridged
2routedIp
3routedIpx
4notUsed
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.1
rlPolicyRulesInterfaceDirection
Specifies the direction for this entry on the
interface. 'inbound' traffic is operated on during
receipt, while 'outbound' traffic is operated on prior
to transmission.
Based on the metering support:
inb…
Enumeration
Enumerated Values:
1inbound
2outbound
3none
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.2
rlPolicyRulesIndex
Enumerates the Rules entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.3
rlPolicyRulesClassifierPointer
Specifies the index in the rlPolicyClassifierTable containing
the classification rule for the filter.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.4
rlPolicyRulesFilteringAction
Specifies the action for the filter.
Values 1-10 reserved for the System filtering implemetation;
Values starting from 11 may be used for user definition about
future application.
Enumerationr/w
Enumerated Values:
1block
2blockAndTrap
3permitAndTrap
4permit
5blockAndDisablePort
6blockTrapAndDisablePort
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.5
rlPolicyRulesDroppedPackets
The number of packets blocked by this filtering rule.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.6
rlPolicyRulesFurtherRefPointer
This further reference indicate on the entry at the metering or
action table, based on the supported features. The
rlPolicyRulesFurtherRefPointer points on the metering table if the
metering feature is supported, if not…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.7
rlPolicyRulesDescription
Free text specifing the nature of this Rule.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.8
rlPolicyRulesStatus
Row status of the Rules entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.9
rlPolicyRulesCounterEnable
allow counting conforming and NonConforming packets .
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.10
rlPolicyRulesCounter
The number of passed this filtering rule.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.11
rlPolicyRulesActionPointer
This further reference indicate on the entry at the
action table, The rlPolicyRulesActionPointer points on the action
table if the aggregate metering feature is supported,or
if meter is not belong to data path.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.12
rlPolicyRulesTimeRange1
Time range of the first ACL.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.13
rlPolicyRulesTimeRange2
Time range of the second ACL.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.3.2.1.14

rlPolicyMeterClassTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.4.2 · 1 row entry · 12 columns
Open in standard view 
This table defines the Metering classes for the system.
rlPolicyMeteringClassEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1
Each statement consists of the following parameters
Indexes
rlPolicyMeteringClassIndex
Column Syntax OID
rlPolicyMeteringClassIndex
This enumerates the table entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.1
rlPolicyMeteringClassAlwaysConform
If true, the meter always accepts all traffic; its
rate is effectively infinite. In such a case, the token
bucket defined by the MeterRate and Burst-Size
parameters is ignored.
also used when there isn't metering suppor…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.2
rlPolicyMeteringClassAggregateMeterRate
The rate in kilobytes/second of traffic considered within the
bandwidth allocated for this policy entry.
kbpsInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.3
rlPolicyMeteringClassAggregateMeterBurstSize
The Burst Size parameter for the aggregate meter leaky bucket. A
value of 0 means that the device should choose the Burst Size
that it thinks is most suitable for the rule.
The interval can be derived from (burstSizex8…
bytesInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.4
rlPolicyMeteringClassPerSessionMeteringRate
A Quantitative Appliction policy rule where each individual
session requires a guaranteed minimum bandwidth.
Specifies the Ingress traffic flow meter per session
indicate a bandwidth limit to be applied to each individu…
kbpsInteger32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.5
rlPolicyMeteringClassMaxSessionLimit
indicate a the maximum number of session for a sepecific rule
to guarante minimum bandwidth.
Value 0 at rlPolicyMeteringClassPerSessionMetering
and rlPolicyMeteringClassMaxSessionLimit
is interpreted to mean no sepecifi…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.6
rlPolicyMeteringClassActionPointer
Specifies the index in the rlPolicyActionTable to be
accessed for packets that are in-profile.
Value 0 is interpreted to mean no action.
A non-zero value may be specified only for RoutedIp
packets in Diffserv mode.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.7
rlPolicyMeteringClassFailMeterPointer
Specifies an index in the rlPolicyMeterClassTable. This
is the meter that is to be used if the packet is out-of-profile
relative to the current meter.
If non-Diffserv mode, this field is not used.
If the current meter i…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.8
rlPolicyMeteringClassStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.9
rlPolicyMeteringCounterEnable
Enable metering counter for the meter entry.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.10
rlPolicyMeteringClassInProfileCounter
meter counter for packets that are in profile .
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.11
rlPolicyMeteringClassOutProfileCounter
meter counter for packets that are out of profile
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.12

rlPolicyActionTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.5.2 · 1 row entry · 22 columns
Open in standard view 
This table defines the Actions for packets that pass the meter table
ie. the characteristics that are assigned to packets before they
reach the scheduler.
When Diffserv is not in effect(ie. IPX, bridging, or IP when the global option
for Diffserv is off), certain table parameters are not available(see
below). The DiffServ option is enabled or disabled by setting
rlDiffservModeEnabled.
rlPolicyActionEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1
Each multifield classification statement consists of the following
parameters
Indexes
rlPolicyActionIndex
Column Syntax OID
rlPolicyActionIndex
This enumerates the Action entry.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.1
rlPolicyActionNewDscp
Indicates the new DSCP with which the packet should
be marked
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.2
rlPolicyActionChangeDscp
If true, the packet is re-marked with the value indicated by
newDscp above. If false, the packet's DSCP value is not changed
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.3
rlPolicyActionMinThreshold
The min-threshold is the queue depth that a random
drop process will seek to manage the queue's depth to.
This object is in the action table rather than the
queue table because Differentiated Services PHBs, such
as the …
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.4
rlPolicyActionMaxThreshold
The max-threshold is the maximum permissible queue
depth. In tail drop scenarios, the queue will drop if a
packet is presented to it and it is instantaneously
full by this measure. In random drop scenarios, the
queue wi…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.5
rlPolicyActionDropPolicy Enumerationr/w
Enumerated Values:
1other
2alwaysDrop
3tailDrop
4randomDrop
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.6
rlPolicyActionDroppedPackets
The number of packets dropped by this action
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.7
rlPolicyActionNonDsInProfileDropPrecedence
This paramer is used at non diffserv mode to attached the drop precedence
for packet InProfile (metering), only if there is a support for drop precedence
and with what level.
Enumerationr/w
Enumerated Values:
1low
2medium
3high
4drop
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.8
rlPolicyActionNonDsOutProfileDropPrecedence
This paramer is used at non diffserv mode to attached the drop precedence
for packet OutProfile (metering), only if there is a support for drop precedence
and with what level.
Enumerationr/w
Enumerated Values:
1low
2medium
3high
4drop
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.9
rlPolicyActionChangeVpt
Routed packets that run through the Rules receive VPT as define at the
service class they attached to, bridge packets receive through the
802.1p operation unless we define to change the VPT for those packets.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.10
rlPolicyActionNewVpt
Priority Tag that will be written to packets .
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.11
rlPolicyActionServiceClassPointer
Specifies the index in rlPolicyServiceClassTable denoting
the service class to which the packet should be assigned
after the action specified in this entry is carried out.
A value of 0 means that no Service class is ass…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.12
rlPolicyActionStatus
The status of the table entry
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.13
rlPolicyActionChangeDscpNonConform
If true, the packet is re-marked with the value indicated by
newDscp for non conforming packets.
If false, the packet's DSCP value is not changed
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.14
rlPolicyActionChangeNewDscpNonConform
Indicates the new DSCP with which the packet should
be marked
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.15
rlPolicyActionAdvancedTrustMode
Configure the port trust state Cos | dscp | tcp-udp | none
default value is none
RlPolicyTrustTypesr/w
Textual Convention: RlPolicyTrustTypes Enumeration
Type Values:
1cos
2dscp
3tcp-udp
4none
5cos-dscp
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.16
rlPolicyActionNewIpPrecedence
Indicates the new Ip- Precedence with which the packet should
be marked
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.17
rlPolicyActionChangeIpPrecedence
If true, the packet is re-marked with the value indicated by
newIpPrecedence above. If false, the packet's DSCP value is not changed
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.18
rlPolicyActionReDirect
specify a ifIndex to redirect the arriving packet.
the default value is 0 means no redirection will be preformed.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.19
rlPolicyActionCopyPort
specify port for which each arriving packet should be sent to in adition
to the regular output port
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.20
rlPolicyActionChangeVid
by specify true the value tells the system to change
the Vlan id when packet leaves the device
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.21
rlPolicyActionNewVid
specify the new Vlan id to assigned to the packet
Integer32r/w
Constraints:
range: 0-4095
 .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.22

rlPolicyServiceClassTentativeTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.6.4 · 1 row entry · 24 columns
Open in standard view 
This table defines the service classes for the system ie. the queue
discipline and weight characteristics that are implemented on each
port unless the user configures a port specific value in ....
The total number of service classes defined can not exceed
rlPolicyNumberOfTransmitQueuesPerPort.
rlPolicyServiceClassTentativeEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1
Each multifield classification statement consists of the following
parameters
Indexes
rlPolicyServiceClassTentativeIndex
Column Syntax OID
rlPolicyServiceClassTentativeIndex
This enumerates the ServiceClass Tentative entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.1
rlPolicyServiceClassTentativeName
The name given by the system administrator to the class.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.2
rlPolicyServiceClassTentativePhbType
Indicates the type of Diffserv per-hop behaviour that this service
class is intended to support. This object can be set by the user
only in DiffServ mode (i.e. rlDiffservModeEnabled = enabled).
Enumerationr/w
Enumerated Values:
1expeditedForwarding
2assuredForwarding
3bestEffort
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.3
rlPolicyServiceClassTentativeMinRate
Specifies either the minimum throughput of the queue as a percentage
of the throughput of each output port on which the service class is
implemented. If zero, there is no minimum rate. This field can not
be set by the…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.4
rlPolicyServiceClassTentativeMaxRate
Specifies either the upper limit on the throughput of the queue as a
percentage of the throughput of each output port on which the service
class is implemented. If zero, there is no maximum rate.
This field can not be…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.5
rlPolicyServiceClassTentativePriority
If non-zero, this service class will operate as a priority service
class with the specified priority value. This object can not be set
in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case
rlServiceCla…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.6
rlPolicyServiceClassTentative8021DPri
802.1D Priority Tag that will be written to routed packets and
untagged bridged packets transmitted with this service class.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.7
rlPolicyServiceClassTentativeStatus
Status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.8
rlPolicyServiceClassTentativeTdThersholdDp0
Tail Drop Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.9
rlPolicyServiceClassTentativeTdThersholdDp1
Tail Drop Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.10
rlPolicyServiceClassTentativeTdThersholdDp2
Tail Drop Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.11
rlPolicyServiceClassTentativeRedMinDp0
WRED Min Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.12
rlPolicyServiceClassTentativeRedMaxDp0
WRED Max Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.13
rlPolicyServiceClassTentativeRedProbDp0
WRED probability for Drop Precedence 0.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.14
rlPolicyServiceClassTentativeRedMinDp1
WRED Min Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.15
rlPolicyServiceClassTentativeRedMaxDp1
WRED Max Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.16
rlPolicyServiceClassTentativeRedProbDp1
WRED probability for Drop Precedence 1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.17
rlPolicyServiceClassTentativeRedMinDp2
WRED Min Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.18
rlPolicyServiceClassTentativeRedMaxDp2
WRED Max Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.19
rlPolicyServiceClassTentativeRedProbDp2
WRED probability for Drop Precedence 2.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.20
rlPolicyServiceClassTentativeRedQweight
additional parameter for the WRED algorithem supporting
the Queue weight exponentail factor
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.21
rlPolicyServiceClassTentativeShaperStatus
If there is shaper on the Queue
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.22
rlPolicyServiceClassTentativeCirQueueShaper
The CIR for the Queue shaper.
N/A when the shper is disabled.
UNITS bps bits per second
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.23
rlPolicyServiceClassTentativeCbsQueueShaper
The CBS for the Queue shaper.
N/A when the shper is disabled.
UNITS bytes
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.4.1.24

rlPolicyServiceClassActiveTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.6.5 · 1 row entry · 23 columns
Open in standard view 
This table defines the service classes for the system ie. the queue
discipline and weight characteristics that are implemented on each
port unless the user configures a port specific value in ....
The total number of service classes defined can not exceed
rlPolicyNumberOfTransmitQueuesPerPort.
rlPolicyServiceClassActiveEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1
Each multifield classification statement consists of the following
parameters
Indexes
rlPolicyServiceClassActiveIndex
Column Syntax OID
rlPolicyServiceClassActiveIndex
This enumerates the ServiceClass Active entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.1
rlPolicyServiceClassActiveName
The name given by the system administrator to the class.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.2
rlPolicyServiceClassActivePhbType
Indicates the type of Diffserv per-hop behaviour that this service
class is intended to support. This object can be set by the user
only in DiffServ mode (i.e. rlDiffservModeEnabled = enabled).
Enumeration
Enumerated Values:
1expeditedForwarding
2assuredForwarding
3bestEffort
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.3
rlPolicyServiceClassActiveMinRate
Specifies either the minimum throughput of the queue as a percentage
of the throughput of each output port on which the service class is
implemented. If zero, there is no minimum rate. This field can not
be set by the…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.4
rlPolicyServiceClassActiveMaxRate
Specifies either the upper limit on the throughput of the queue as a
percentage of the throughput of each output port on which the service
class is implemented. If zero, there is no maximum rate.
This field can not be…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.5
rlPolicyServiceClassActivePriority
If non-zero, this service class will operate as a priority service
class with the specified priority value. This object can not be set
in Diffserv mode (i.e. rlDiffservModeEnabled = enabled), in which case
rlServiceCla…
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.6
rlPolicyServiceClassActive8021DPri
802.1D Priority Tag that will be written to routed packets and
untagged bridged packets transmitted with this service class.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.7
rlPolicyServiceClassActiveTdThersholdDp0
Tail Drop Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.8
rlPolicyServiceClassActiveTdThersholdDp1
Tail Drop Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.9
rlPolicyServiceClassActiveTdThersholdDp2
Tail Drop Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.10
rlPolicyServiceClassActiveRedMinDp0
WRED Min Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.11
rlPolicyServiceClassActiveRedMaxDp0
WRED Max Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.12
rlPolicyServiceClassActiveRedProbDp0
WRED probability for Drop Precedence 0.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.13
rlPolicyServiceClassActiveRedMinDp1
WRED Min Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.14
rlPolicyServiceClassActiveRedMaxDp1
WRED Max Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.15
rlPolicyServiceClassActiveRedProbDp1
WRED probability for Drop Precedence 1.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.16
rlPolicyServiceClassActiveRedMinDp2
WRED Min Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.17
rlPolicyServiceClassActiveRedMaxDp2
WRED Max Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.18
rlPolicyServiceClassActiveRedProbDp2
WRED probability for Drop Precedence 2.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.19
rlPolicyServiceClassActiveRedQweight
additional parameter for the WRED algorithem supporting
the Queue weight exponentail factor
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.20
rlPolicyServiceClassActiveShaperStatus
If there is shaper on the Queue
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.21
rlPolicyServiceClassActiveCirQueueShaper
The CIR for the queue shaper.
N/A when the shper is disabled
UNITS bps bits per second
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.22
rlPolicyServiceClassActiveCbsQueueShaper
The CBS for the queue shaper.
N/A when the shper is disabled.
UNITS bytes
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.5.1.23

rlPolicyPortConfigurationTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.6.6 · 1 row entry · 14 columns
Open in standard view 
This table enables the network administrator to fine-tune
the bandwidth given to each service class on each port.
The values in this table will thus override those of the
rlServiceClassTable (THIS TABLE IS MANAGE FROM 3SW).
rlPolicyPortCfgEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1
Configuration parameters for each port/service class.
Indexes
rlPolicyPortCfgIfIndex
Column Syntax OID
rlPolicyPortCfgIfIndex
Interface index.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.1
rlPolicyPortCfgMinimalBandwidth
The list of objects contain parameters at Precents type for the minimal bandwidth
to this port/service class at WWR . The OID length is based on the number of the
service class number, every OID define parameter of ser…
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.2
rlPolicyPortCfgMaximalBandwidth
The list of objects contain parameters at Precents type for the maximal bandwidth
to this port/service class at SP . The OID length is based on the number of the
service class number, every OID define parameter of serv…
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.3
rlPolicyPortCfgStatus
Status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.4
rlpolicyDropProfilePointer
pointing to drop algorithem profile.
the profile describs the drop algorithem
(tail, red)and params
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.5
rlPolicyPortCfgQueueShaperStatus
If there is shaper on the Queue
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.6
rlPolicyPortCfgCirQueueShaper
The CIR for the Queue shaper.
N/A when the shper is disabled
UNITS bps bits per second
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.7
rlPolicyPortCfgCbsQueueShaper
The CBS for the Queue shaper.
N/A when the shper is disabled.
UNITS bytes
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.8
rlPolicyPortCfgPortShaperStatus
If there is shaper on the port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.9
rlPolicyPortCfgCirPortShaper
The CIR for the port shaper.
N/A when the shper is disabled
UNITS bps bits per second
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.10
rlPolicyPortCfgCbsPortShaper
The CBS for the port shaper.
N/A when the shper is disabled.
UNITS bytes
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.11
rlPolicyPortCfgPortRateLimitStatus
If there is Rate Limit on the port
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.12
rlPolicyPortCfgCirPortRateLimit
The CIR for the port Rate limit.
N/A when the Rate limit is disabled
UNITS bps bits per second
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.13
rlPolicyPortCfgCbsPortRateLimit
The CBS for the port Rate Limit.
N/A when the Rate Limit is disabled.
UNITS bytes
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.6.1.14

rlPolicyDropProfileTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.6.7 · 1 row entry · 16 columns
Open in standard view 
this table defines drop profile
which describ the queue's drop
algorithems
rlPolicyDropProfileEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1
Configuration parameters for each port/service class.
Indexes
rlPolicyDropProfileIndex rlPolicyDropProfileQueueNumber
Column Syntax OID
rlPolicyDropProfileIndex
Interface index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.1
rlPolicyDropProfileQueueNumber
Interface Queue number.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.2
rlPolicyDropProfileTdThersholdDp0
Tail Drop Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.3
rlPolicyDropProfileTdThersholdDp1
Tail Drop Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.4
rlPolicyDropProfileTdThersholdDp2
Tail Drop Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.5
rlPolicyDropProfileRedMinDp0
WRED Min Threshold for Drop Precedence 0.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.6
rlPolicyDropProfileRedMaxDp0
WRED Max Threshold for Drop Precedence 0.
UNITS percent 0-100 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.7
rlPolicyDropProfileRedProbDp0
WRED probability for Drop Precedence 0.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.8
rlPolicyDropProfileRedMinDp1
WRED Min Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.9
rlPolicyDropProfileRedMaxDp1
WRED Max Threshold for Drop Precedence 1.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.10
rlPolicyDropProfileRedProbDp1
WRED probability for Drop Precedence 1.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.11
rlPolicyDropProfileRedMinDp2
WRED Min Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.12
rlPolicyDropProfileRedMaxDp2
WRED Max Threshold for Drop Precedence 2.
UNITS percent 0-100
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.13
rlPolicyDropProfileRedProbDp2
WRED probability for Drop Precedence 2.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.14
rlPolicyDropProfileRedQweight
additional parameter for the WRED algorithem supporting
the Queue weight exponentail factor
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.15
rlPolicyDropProfileStatus
Status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.6.7.1.16

rlPolicyVlanConfigurationTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.6.8 · 1 row entry · 5 columns
Open in standard view 
This table enables the network administrator to fine-tune
the rate limit given to each vlan.
The values in this table will thus override those of the
rlQosIfPolicyTable (THIS TABLE IS MANAGED FROM 3SW).
rlPolicyVlanCfgEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.6.8.1
Configuration parameters for each vlan.
Indexes
rlPolicyVlanCfgVlanId
Column Syntax OID
rlPolicyVlanCfgVlanId
Interface index.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.10.94.89.89.59.6.8.1.1
rlPolicyVlanCfgPortRateLimitStatus
If there is Rate Limit on the vlan
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.6.8.1.2
rlPolicyVlanCfgCirPortRateLimit
The CIR for the port Rate limit.
N/A when the Rate limit is disabled
UNITS bps bits per second
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.8.1.3
rlPolicyVlanCfgCbsPortRateLimit
The CBS for the port Rate Limit.
N/A when the Rate Limit is disabled.
UNITS bytes
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.6.8.1.4
rlPolicyVlanCfgStatus
Status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.6.8.1.5

rlDiffservBoundaryTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.7.3 · 1 row entry · 3 columns
Open in standard view 
Indicates whether a port is considered a boundary or an interior
node of  the Diffserv domain
rlDiffservBoundaryEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.7.3.1
Each boundary/interior ports table entry consists of the following
parameters
Indexes
rlDiffservBoundaryIfIndex
Column Syntax OID
rlDiffservBoundaryIfIndex
The Interface index whose type is being defined
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.7.3.1.1
rlDiffservBoundaryPortType
The boundary status of the port.
Enumerationr/w
Enumerated Values:
1boundary
2interior
 .1.3.6.1.4.1.171.10.94.89.89.59.7.3.1.2
rlDiffservBoundaryStatus
Status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.7.3.1.3

rlPolicyDscpServiceClassTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.1 · 1 row entry · 3 columns
Open in standard view 
This table specifies The DSCP
to ServiceClass map table
rlPolicyDscpServiceClassEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.1.1
Each entry in this table describes The ServiceClass assigned to a Dscp value.
The index is DSCP represent by rlPolicyDscpIndex
Indexes
rlPolicyDscpIndex
Column Syntax OID
rlPolicyDscpIndex
DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.1.1.1
rlPolicyServiceClassValue
ServiceClass value.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.94.89.89.59.10.1.1.2
rlPolicyDscpServiceClassStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.10.1.1.3

rlPolicyTcpUdpPortServiceClassTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.2 · 1 row entry · 4 columns
Open in standard view 
This table specifies TCP/UDP
Port to ServiceClass map table
rlPolicyTcpUdpPortServiceClassEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.2.1
Each entry in this table describes The
ServiceClass Value.
The index is TCP/UDP port represent by rlPolicyTcpUdpPort
Indexes
rlPolicyProtocolType rlPolicyTcpUdpPort
Column Syntax OID
rlPolicyProtocolType
TCP/UDP port type.
L4ProtType
Textual Convention: L4ProtType Enumeration
Type Values:
1tcp
2udp
 .1.3.6.1.4.1.171.10.94.89.89.59.10.2.1.1
rlPolicyTcpUdpPort
TCP/UDP port number.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.94.89.89.59.10.2.1.2
rlPolicyMappedServiceClass
ServiceClass value.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.10.2.1.3
rlPolicyTcpUdpPortServiceClassStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.10.2.1.4

rlPolicyDscpRemarkTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.3 · 1 row entry · 3 columns
Open in standard view 
This table specifies The DSCP
Remark table
rlPolicyDscpRemarkEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.3.1
Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlPolicyOldDscp
Indexes
rlPolicyRmOldDscp
Column Syntax OID
rlPolicyRmOldDscp
Old DSCP.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.3.1.1
rlPolicyRmNewDscp
New DSCP.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.3.1.2
rlPolicyDscpRemarkStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.10.3.1.3

rlPolicyDscpMutationTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.4 · 1 row entry · 3 columns
Open in standard view 
This table specifies The DSCP
Mutation table
rlPolicyDscpMutationEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.4.1
Each entry in this table describes the new
DSCP for the packet.
The index is Old DSCP represent by rlPolicyOldDscp
Indexes
rlPolicyOldDscp
Column Syntax OID
rlPolicyOldDscp
Old DSCP.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.4.1.1
rlPolicyNewDscp
New DSCP.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.4.1.2
rlPolicyDscpMutationStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.10.4.1.3

rlPolicyTrustModeTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.5 · 1 row entry · 2 columns
Open in standard view 
This table specifies the port state for the trusted basic mode
rlPolicyTrustModeEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.5.1
describes the ports status that belongs to the global trusted state
Indexes
rlPolicyTrustModePortNumber
Column Syntax OID
rlPolicyTrustModePortNumber
phisical port number .
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.10.5.1.1
rlPolicyTrustModePortState
the port state for the trusted mode.
the port can be enabled or disabled for the basic trust mode
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.94.89.89.59.10.5.1.2

rlPolicyDscpVptTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.6 · 1 row entry · 3 columns
Open in standard view 
This table specifies The DSCP to VPT map table
rlPolicyDscpVptEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.6.1
Each entry in this table describes The VPT assigned to a Dscp value.
The index is DSCP represent by rlPolicyDscpValue.
Indexes
rlPolicyDscpValue
Column Syntax OID
rlPolicyDscpValue
DSCP value.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.6.1.1
rlPolicyVptValue
VPT value.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.10.6.1.2
rlPolicyDscpVptStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.10.6.1.3

rlPolicyDscpToDpTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.10.7 · 1 row entry · 3 columns
Open in standard view 
This table specifies The DSCP
To Dp table
rlPolicyDscpToDpEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.10.7.1
Each entry in this table describes the new
DP for the packet.
The index is DSCP represent by rlPolicyDscp
Indexes
rlPolicyDscp
Column Syntax OID
rlPolicyDscp
Packet DSCP.
Integer32
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.94.89.89.59.10.7.1.1
rlPolicyDp
New DP.
Integer32r/w
Constraints:
range: 0-2
 .1.3.6.1.4.1.171.10.94.89.89.59.10.7.1.2
rlPolicyDscpToDpStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.10.7.1.3

rlPolicyDefaultForwardingTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.11 · 1 row entry · 10 columns
Open in standard view 
This table specifies The default forwarding
values : permit or deny for list of specific ports , vlans
rlPolicyDefaultForwardingEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.11.1
Since the table is search to find match according to first match
Entries with specific protocol should be set before entries for entire layer.
Indexes
rlPolicyDefaultForwardingIndex
Column Syntax OID
rlPolicyDefaultForwardingIndex
Default Forwarding Index.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.11.1.1
rlPolicyDefaultForwardingPortList
Default Forwarding Port List.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.171.10.94.89.89.59.11.1.2
rlPolicyDefaultForwardingVlanId1To1024
Default Forwarding VlanId List 1.
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.11.1.3
rlPolicyDefaultForwardingVlanId1025To2048
Default Forwarding VlanId List 2.
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.11.1.4
rlPolicyDefaultForwardingVlanId2049To3072
Default Forwarding VlanId List 3.
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.11.1.5
rlPolicyDefaultForwardingVlanId3073To4096
Default Forwarding VlanId List 4.
OctetStringr/w .1.3.6.1.4.1.171.10.94.89.89.59.11.1.6
rlPolicyDefaultForwardingLayer
Default Forwarding Action specify layer l2 l3 l3-ipv6
Enumerationr/w
Enumerated Values:
1l2
2l3
3l3-ipv6
 .1.3.6.1.4.1.171.10.94.89.89.59.11.1.7
rlPolicyDefaultForwardingAction
Default Forwarding Action specify permit or deny
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.10.94.89.89.59.11.1.8
rlPolicyDefaultForwardingStatus
The status of a table entry.
It is used to delete/Add an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.11.1.9
rlPolicyDefaultForwardingProtocol
The protocol type to be applied with the default action.
Enumerationr/w
Enumerated Values:
1bpdu
2icmpv6
255none
 .1.3.6.1.4.1.171.10.94.89.89.59.11.1.10

rlPolicyPortPolicyStatisticsTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.12.1 · 1 row entry · 5 columns
Open in standard view 
This table specifies statistics counter for policies with specific actions
rlPolicyPortPolicyStatisticsEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.12.1.1
Each entry in this table describes counter per port.
The index is port represent by rlIfIndex.
In each entry represents counter, it's type , it's size and whether it's enabled.
Indexes
rlPolicyPortPolicyStatisticsIfIndex rlPolicyPortPolicyStatisticsCntrType
Column Syntax OID
rlPolicyPortPolicyStatisticsIfIndex
Interface index.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.12.1.1.1
rlPolicyPortPolicyStatisticsCntrType
Counter type.
StatisticsCntrType
Textual Convention: StatisticsCntrType Enumeration
Type Values:
1statisticsCntrTypeSetDSCP
2statisticsCntrTypeDeny
 .1.3.6.1.4.1.171.10.94.89.89.59.12.1.1.2
rlPolicyPolicyStatisticsCntrSize
Counter size in bits.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.171.10.94.89.89.59.12.1.1.3
rlPolicyPolicyStatisticsEnableCounting
Indication whether the counter is enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.12.1.1.4
rlPolicyPolicyStatisticsCounterValue
Counter value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.10.94.89.89.59.12.1.1.5

rlPolicyOutQueueStatisticsTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.12.2 · 1 row entry · 13 columns
Open in standard view 
Each entry in this table describes counter per any permutation of
Port/VLAN/Queue/Drop Precedence . Each of the above can a group off 'All'.
The index is port represent by  rlPolicyOutQueueStatisticsCountrID.
In each entry there are fields representing
whether the counter is enabled and counters value.
rlPolicyOutQueueStatisticsEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1
Each entry includes port, vlan, queue, drop precedence and counter value.
Indexes
rlPolicyOutQueueStatisticsCountrID
Column Syntax OID
rlPolicyOutQueueStatisticsCountrID
Counter id, the key of the table.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.1
rlPolicyOutQueueStatisticsIfIndexList
Port for which the flow is counted.
Q-BRIDGE-MIBPortListr/w
Textual Convention: Q-BRIDGE-MIBPortList OctetString
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.2
rlPolicyOutQueueStatisticsPortAll
Indication for whether the port is configured as range of all the ports
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.3
rlPolicyOutQueueStatisticsVlan
VLAN for which the flow is counted.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.4
rlPolicyOutQueueStatisticsVlanAll
Indication for whether the Vlan is configured as range of all the Vlans
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.5
rlPolicyOutQueueStatisticsQueue
Queue for which the flow is counted.
Integer32r/w
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.6
rlPolicyOutQueueStatisticsQueueAll
Indication for whether the Queue is configured as range of all the Queues
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.7
rlPolicyOutQueueStatisticsDP
Drop Precedence for which the flow is counted.
StatisticsDPTyper/w
Textual Convention: StatisticsDPType Enumeration
Type Values:
1green
2yellow
3red
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.8
rlPolicyOutQueueStatisticsDPAll
Indication for whether the DP is configured as range of all the DPs
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.9
rlPolicyOutQueueStatisticsCounterTailDropValue
The counter for tail dropped value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.10
rlPolicyOutQueueStatisticsCounterAllValue
The counter for all traffic value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.11
rlPolicyOutQueueStatisticsCntrNumOfBits
Counter size in bits for the counter.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.12
rlPolicyOutQueueStatisticsStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.12.2.1.13

rlPolicyGlobalStatisticsCntrsTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.12.3 · 1 row entry · 4 columns
Open in standard view 
This table specifies statistics global counters  for specific rules for
all ports that they are connected to
rlPolicyGlobalStatisticsCntrsEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.12.3.1
Each entry represents global counter.
Indexes
rlPolicyGlobalStatisticsCntrsType
Column Syntax OID
rlPolicyGlobalStatisticsCntrsType
Counter type.
StatisticsCntrType
Textual Convention: StatisticsCntrType Enumeration
Type Values:
1statisticsCntrTypeSetDSCP
2statisticsCntrTypeDeny
 .1.3.6.1.4.1.171.10.94.89.89.59.12.3.1.1
rlPolicyGlobalStatisticsCntrsNumOfBits
Counter size in bits.
StatisticsCntrNumOfBitsType
Textual Convention: StatisticsCntrNumOfBitsType Enumeration
Type Values:
32uint32
48uint48
64uint64
 .1.3.6.1.4.1.171.10.94.89.89.59.12.3.1.2
rlPolicyGlobalStatisticsCntrsCounterValue
Counter value.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.10.94.89.89.59.12.3.1.3
rlPolicyGlobalStatisticsStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.12.3.1.4

rlPolicyClassifierUtilizationTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.13.1 · 1 row entry · 3 columns
Open in standard view 
A table containing Classifier utilization information.
Each row represents objects for a particular Unit
present in this system.
rlPolicyClassifierUtilizationEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.13.1.1
A Single entry containing Classifier utilization information.
Indexes
rlPolicyClassifierUtilizationUnitId
Column Syntax OID
rlPolicyClassifierUtilizationUnitId
The Unit ID of this Classifier. must be unique per entry.
This is an index into the table.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.13.1.1.1
rlPolicyClassifierUtilizationPercent
The classifier utilization percentage.
Unsigned32
Constraints:
range: 0-100
 .1.3.6.1.4.1.171.10.94.89.89.59.13.1.1.2
rlPolicyClassifierUtilizationRulesNumber
The classifier utilization number of used rules, in short rules resolution.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.171.10.94.89.89.59.13.1.1.3

rlPolicyTimeBasedAclTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.15.1 · 1 row entry · 5 columns
Open in standard view 
This table specifies Time Based ACL table
rlPolicyTimeBasedAclEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.15.1.1
Each entry in this table describes the new
time range for ACE.
The index is time range name
Indexes
rlPolicyTimeBasedAclRangeIndex
Column Syntax OID
rlPolicyTimeBasedAclRangeIndex
Index of time range.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.15.1.1.1
rlPolicyTimeBasedAclRangeName
Name of time range.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.94.89.89.59.15.1.1.2
rlPolicyTimeBasedAclAbsStart
Time of start of absolute time range in following format:
month day year hh:mm
month: 01-12 (January-December)
day: 01-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.171.10.94.89.89.59.15.1.1.3
rlPolicyTimeBasedAclAbsEnd
Time of end of absolute time range in following format:
month day year hh:mm
month: 01-12 (January-December)
day: 01-31
year: 0-99 (2000-2099)
hh: 0-23 (hours)
mm: 0-59 (minutes)
OctetStringr/w
Constraints:
range: 0-14
 .1.3.6.1.4.1.171.10.94.89.89.59.15.1.1.4
rlPolicyTimeBasedAclStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.15.1.1.5

rlPolicyTimeBasedAclPeriodicTable

table
.1.3.6.1.4.1.171.10.94.89.89.59.15.2 · 1 row entry · 5 columns
Open in standard view 
This table specifies Time Based ACL Periodic table
rlPolicyTimeBasedAclPeriodicEntry entry .1.3.6.1.4.1.171.10.94.89.89.59.15.2.1
Each entry in this table describes the new
periodic time range for ACE.
The index is time range index and periodic index
Indexes
rlPolicyTimeBasedAclPeriodicIndex rlPolicyTimeBasedAclPeriodicWeekList rlPolicyTimeBasedAclPeriodicStart rlPolicyTimeBasedAclPeriodicEnd
Column Syntax OID
rlPolicyTimeBasedAclPeriodicIndex
Index of time range.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.94.89.89.59.15.2.1.1
rlPolicyTimeBasedAclPeriodicWeekList
The bitmap allows to user to select periodic time range for several
days at once. The periodic range will be associated with specific days
when corresponding bits will be set. If at least one bit has been set in the
rlP…
RlPolicyTimeBasedAclWeekPeriodicListr/w
Textual Convention: RlPolicyTimeBasedAclWeekPeriodicList Bits
Type Values:
0monday
1tuesday
2wednesday
3thursday
4friday
5saturday
6sunday
 .1.3.6.1.4.1.171.10.94.89.89.59.15.2.1.2
rlPolicyTimeBasedAclPeriodicStart
Time of start of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minute…
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.15.2.1.3
rlPolicyTimeBasedAclPeriodicEnd
Time of end of periodic time range in following format:
weekday hh:mm
weekday: 0-7 (0 means the weekday is not specified,
1-7 are weekdays from Monday to Sunday)
hh: 0-23 (hours)
mm: 0-59 (minutes)…
OctetStringr/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.94.89.89.59.15.2.1.4
rlPolicyTimeBasedAclPeriodicStatus
The status of a table entry.
It is used to delete an entry from this table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.94.89.89.59.15.2.1.5