rlPolicyMeteringClassAggregateMeterRate
DLINK-3100-POLICY-MIB ·
.1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.3
Object
column
r/w
kbps Integer32
The rate in kilobytes/second of traffic considered within the bandwidth allocated for this policy entry.
Context
- MIB
- DLINK-3100-POLICY-MIB
- OID
.1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kbps
- Parent
- rlPolicyMeteringClassEntry
- Table
- rlPolicyMeterClassTable
- Siblings
- 11
Syntax
kbps Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicyMeteringClassIndex This enumerates the table entry. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.1 |
| rlPolicyMeteringCounterEnable Enable metering counter for the meter entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.10 |
| rlPolicyMeteringClassInProfileCounter meter counter for packets that are in profile . | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.11 |
| rlPolicyMeteringClassOutProfileCounter meter counter for packets that are out of profile | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.12 |
| rlPolicyMeteringClassAlwaysConform If true, the meter always accepts all traffic; its
rate is effectively infinite. In such a case, the token
bucket defined by the MeterRate and Burst-Size
parameters is ignored.
al… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.2 |
| rlPolicyMeteringClassAggregateMeterBurstSize The Burst Size parameter for the aggregate meter leaky bucket. A
value of 0 means that the device should choose the Burst Size
that it thinks is most suitable for the rule.
The i… | column | bytes Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.4 |
| rlPolicyMeteringClassPerSessionMeteringRate A Quantitative Appliction policy rule where each individual
session requires a guaranteed minimum bandwidth.
Specifies the Ingress traffic flow meter per session
indicate a bandwi… | column | kbps Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.5 |
| rlPolicyMeteringClassMaxSessionLimit indicate a the maximum number of session for a sepecific rule
to guarante minimum bandwidth.
Value 0 at rlPolicyMeteringClassPerSessionMetering
and rlPolicyMeteringClassMaxSession… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.6 |
| rlPolicyMeteringClassActionPointer Specifies the index in the rlPolicyActionTable to be
accessed for packets that are in-profile.
Value 0 is interpreted to mean no action.
A non-zero value may be specified only for… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.7 |
| rlPolicyMeteringClassFailMeterPointer Specifies an index in the rlPolicyMeterClassTable. This
is the meter that is to be used if the packet is out-of-profile
relative to the current meter.
If non-Diffserv mode, this f… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.8 |
| rlPolicyMeteringClassStatus The status of a table entry.
It is used to delete an entry from this table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.94.89.89.59.4.2.1.9 |