rlPolicyClassifierDiffservOutIfType

DLINK-3100-POLICY-MIB · .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.8

MIB view Table view

Object

column r/w RlPolicyClassifierDiffservIfType

For a classifier used by the Diffserv Rules table.  Enables
specification of a classifier that should apply to outbound
traffic on all Diffserv boundary ports or all Diffserv Interior
ports.
If normal is specified, the rlPolicyClassifierOutIfIndex field
is used as it is in the non-diffserv case.  If allBoundary or
allInterior is selected, rlPolicyClassifierOutIfIndex is ignored

Context

MIB: DLINK-3100-POLICY-MIB
OID: .1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.8
Type: column
Access: readwrite
Status: current
Parent: rlPolicyClassifierEntry
Table: rlPolicyClassifierTable
Siblings: 14

Syntax

RlPolicyClassifierDiffservIfType

Source: RlPolicyClassifierDiffservIfType
Base type: Enumeration

Values & Constraints

Type Values

`1`	normal
`2`	allBoundaryPorts
`3`	allInteriorPorts

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rlPolicyClassifierType Specifies a classifier type for which offset bytes can be specified.	column	RlPolicyGroupType	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.1`
rlPolicyClassifierInIfIndexList allow to define list of ports for the specific classifier for ingress classification. if rlPolicyClassifierInIfIndex equal to zero then the following list should be reffered , if …	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.10`
rlPolicyClassifierOutIfIndexList allow to define list of ports for the specific classifier for egress classification. if rlPolicyClassifierOutIfIndex equal to zero then the following list should be reffered , if …	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.11`
rlPolicyClassifierVPTID VPT ID - user priority tag to be compared with . 8 is used to indicate not used value for this classifier	column	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.12`
rlPolicyClassifierVPTIDMask VPT ID Mask ,mask the user priority field . 0 is the default indicate Mask all compared with any VPT value	column	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.13`
rlPolicyClassifierEtherTypeID EtherType ID, to be compared with. 65535 is used to indicate not used value for this classifier 1499 is uded to indicate IPv4 ethertype that is originated from IPv4 ACL with permi…	column	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.14`
rlPolicyClassifierInnerVID INNER VLAN ID, used only for double tagged traffic.	column	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.15`
rlPolicyClassifierIndex Index into the Classifier Table.	column	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.2`
rlPolicyClassifierOmpcList The list of OMPCs to check with this Classifier. Each subidentifier together with rlPolicyClassifierType specify one OMPC.	column	ObjectIdentifier	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.3`
rlPolicyClassifierInIfIndex Input interface index to be compared with received packet, a value of 0 denotes that the classifier is applied to all ports.	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.4`
rlPolicyClassifierOutIfIndex Output interface index to be compared with sent packet, a value of 0 denotes that the classifier is applied to all ports.	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.5`
rlPolicyClassifierVID VLAN ID, used only for bridged traffic.	column	Integer32	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.6`
rlPolicyClassifierDiffservInIfType For a classifier used by the Diffserv Rules table. Enables specification of a classifier that should apply to all Diffserv boundary ports or all Diffserv Interior ports. If norma…	column	RlPolicyClassifierDiffservIfType	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.7`
rlPolicyClassifierStatus The status of a table entry. It is used to delete an entry from this table.	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.171.10.94.89.89.59.2.4.1.9`