rlPolicyActionMaxThreshold
DLINK-3100-POLICY-MIB ·
.1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.5
Object
column
r/w
Integer32
The max-threshold is the maximum permissible queue depth. In tail drop scenarios, the queue will drop if a packet is presented to it and it is instantaneously full by this measure. In random drop scenarios, the queue will drop if a packet is presented to it and the average queue depth exceeds the max-threshold. This object is in the action table rather than the queue table because Differentiated Services PHBs, such as the Assured Service, permit differently classified traffic to have different drop parameters even though they occupy the same queue.
Context
- MIB
- DLINK-3100-POLICY-MIB
- OID
.1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rlPolicyActionEntry
- Table
- rlPolicyActionTable
- Siblings
- 21
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rlPolicyActionIndex This enumerates the Action entry. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.1 |
| rlPolicyActionChangeVpt Routed packets that run through the Rules receive VPT as define at the
service class they attached to, bridge packets receive through the
802.1p operation unless we define to chan… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.10 |
| rlPolicyActionNewVpt Priority Tag that will be written to packets . | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.11 |
| rlPolicyActionServiceClassPointer Specifies the index in rlPolicyServiceClassTable denoting
the service class to which the packet should be assigned
after the action specified in this entry is carried out.
A value… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.12 |
| rlPolicyActionStatus The status of the table entry | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.13 |
| rlPolicyActionChangeDscpNonConform If true, the packet is re-marked with the value indicated by
newDscp for non conforming packets.
If false, the packet's DSCP value is not changed | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.14 |
| rlPolicyActionChangeNewDscpNonConform Indicates the new DSCP with which the packet should
be marked | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.15 |
| rlPolicyActionAdvancedTrustMode Configure the port trust state Cos | dscp | tcp-udp | none
default value is none | column | RlPolicyTrustTypes | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.16 |
| rlPolicyActionNewIpPrecedence Indicates the new Ip- Precedence with which the packet should
be marked | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.17 |
| rlPolicyActionChangeIpPrecedence If true, the packet is re-marked with the value indicated by
newIpPrecedence above. If false, the packet's DSCP value is not changed | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.18 |
| rlPolicyActionReDirect specify a ifIndex to redirect the arriving packet.
the default value is 0 means no redirection will be preformed. | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.19 |
| rlPolicyActionNewDscp Indicates the new DSCP with which the packet should
be marked | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.2 |
| rlPolicyActionCopyPort specify port for which each arriving packet should be sent to in adition
to the regular output port | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.20 |
| rlPolicyActionChangeVid by specify true the value tells the system to change
the Vlan id when packet leaves the device | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.21 |
| rlPolicyActionNewVid specify the new Vlan id to assigned to the packet | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.22 |
| rlPolicyActionChangeDscp If true, the packet is re-marked with the value indicated by
newDscp above. If false, the packet's DSCP value is not changed | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.3 |
| rlPolicyActionMinThreshold The min-threshold is the queue depth that a random
drop process will seek to manage the queue's depth to.
This object is in the action table rather than the
queue table because Di… | column | Integer32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.4 |
| rlPolicyActionDropPolicy | column | Enumeration | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.6 |
| rlPolicyActionDroppedPackets The number of packets dropped by this action | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.7 |
| rlPolicyActionNonDsInProfileDropPrecedence This paramer is used at non diffserv mode to attached the drop precedence
for packet InProfile (metering), only if there is a support for drop precedence
and with what level. | column | Enumeration | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.8 |
| rlPolicyActionNonDsOutProfileDropPrecedence This paramer is used at non diffserv mode to attached the drop precedence
for packet OutProfile (metering), only if there is a support for drop precedence
and with what level. | column | Enumeration | .1.3.6.1.4.1.171.10.94.89.89.59.5.2.1.9 |