pingCtlTestName
DISMAN-PING-MIB ·
.1.3.6.1.2.1.80.1.2.1.2
Object
column
OctetString
The name of the ping test. This is locally unique, within the scope of a pingCtlOwnerIndex.
Context
- MIB
- DISMAN-PING-MIB
- OID
.1.3.6.1.2.1.80.1.2.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- pingCtlEntry
- Table
- pingCtlTable
- Siblings
- 22
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-32
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pingCtlOwnerIndex To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need… | column | OctetString | .1.3.6.1.2.1.80.1.2.1.1 |
| pingCtlFrequency The number of seconds to wait before repeating a ping test
as defined by the value of the various objects in the
corresponding row.
A single ping test consists of a… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.80.1.2.1.10 |
| pingCtlMaxRows The maximum number of corresponding entries allowed
in the pingProbeHistoryTable. An implementation of this
MIB will remove the oldest corresponding entry in the
pingProbeHistory… | column | rows SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.80.1.2.1.11 |
| pingCtlStorageType The storage type for this conceptual row.
Conceptual rows having the value 'permanent' need not
allow write-access to any columnar objects in the row. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.80.1.2.1.12 |
| pingCtlTrapGeneration The value of this object determines when and whether
to generate a notification for this entry:
probeFailure(0) - Generate a pingProbeFailed
notification subj… | column | Bits | .1.3.6.1.2.1.80.1.2.1.13 |
| pingCtlTrapProbeFailureFilter The value of this object is used to determine when
to generate a pingProbeFailed NOTIFICATION.
Setting BIT probeFailure(0) of object
pingCtlTrapGeneration to '1' im… | column | Unsigned32 | .1.3.6.1.2.1.80.1.2.1.14 |
| pingCtlTrapTestFailureFilter The value of this object is used to determine when
to generate a pingTestFailed NOTIFICATION.
Setting BIT testFailure(1) of object
pingCtlTrapGenerat… | column | Unsigned32 | .1.3.6.1.2.1.80.1.2.1.15 |
| pingCtlType The value of this object is used either to report or
to select the implementation method to be used for
calculating a ping response time. The value of this
object MAY be selected… | column | ObjectIdentifier | .1.3.6.1.2.1.80.1.2.1.16 |
| pingCtlDescr The purpose of this object is to provide a
descriptive name of the remote ping test. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.2.1.80.1.2.1.17 |
| pingCtlSourceAddressType Specifies the type of the source address,
pingCtlSourceAddress, to be used at a remote host
when a ping operation is performed. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.80.1.2.1.18 |
| pingCtlSourceAddress Use the specified IP address (which must be given in
numeric form, not as a hostname) as the source address
in outgoing probe packets. On hosts with more than one
IP address, thi… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.80.1.2.1.19 |
| pingCtlIfIndex Setting this object to an interface's ifIndex prior
to starting a remote ping operation directs
the ping probes to be transmitted over the
specified interface. A value of zero fo… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.2.1.80.1.2.1.20 |
| pingCtlByPassRouteTable The purpose of this object is to enable optional
bypassing the route table. If enabled, the remote
host will bypass the normal routing tables and send
directly to a host on an at… | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.80.1.2.1.21 |
| pingCtlDSField Specifies the value to store in the Type of Service
(TOS) octet in the IPv4 header or in the Traffic
Class octet in the IPv6 header, respectively, of the
IP packet used to encapsu… | column | Unsigned32 | .1.3.6.1.2.1.80.1.2.1.22 |
| pingCtlRowStatus This object allows entries to be created and deleted
in the pingCtlTable. Deletion of an entry in this
table results in the deletion of all corresponding (same
pingCtlOwnerIndex … | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.80.1.2.1.23 |
| pingCtlTargetAddressType Specifies the type of host address to be used at a remote
host for performing a ping operation. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.80.1.2.1.3 |
| pingCtlTargetAddress Specifies the host address to be used at a remote host for
performing a ping operation. The host address type is
determined by the value of the corresponding
pingCtlTargetAddress… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.80.1.2.1.4 |
| pingCtlDataSize Specifies the size of the data portion to be
transmitted in a ping operation, in octets. Whether this
value can be applied depends on the selected
implementation method for perfo… | column | octets Unsigned32 | .1.3.6.1.2.1.80.1.2.1.5 |
| pingCtlTimeOut Specifies the time-out value, in seconds, for a
remote ping operation. | column | seconds Unsigned32 | .1.3.6.1.2.1.80.1.2.1.6 |
| pingCtlProbeCount Specifies the number of times to perform a ping
operation at a remote host as part of a single ping test. | column | probes Unsigned32 | .1.3.6.1.2.1.80.1.2.1.7 |
| pingCtlAdminStatus Reflects the desired state that a pingCtlEntry should be
in:
enabled(1) - Attempt to activate the test as defined by
this pingCtlEntry.
disa… | column | Enumeration | .1.3.6.1.2.1.80.1.2.1.8 |
| pingCtlDataFill The content of this object is used together with the
corresponding pingCtlDataSize value to determine how to
fill the data portion of a probe packet. The option of
selecting a da… | column | OctetString | .1.3.6.1.2.1.80.1.2.1.9 |