DISMAN-PING-MIB Table View

Defines the ping Control Table for providing, via SNMP,
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the pingResultsTable and the
pingProbeHistoryTable.

pingCtlEntry row .1.3.6.1.2.1.80.1.2.1

Defines an entry in the pingCtlTable. The first index
element, pingCtlOwnerIndex, is of type SnmpAdminString,
a textual convention that allows for use of the SNMPv3
View-Based Access Control Model (RFC 3415, VACM)
and …

Indexes

pingCtlOwnerIndex pingCtlTestName

Column	Syntax	OID
pingCtlOwnerIndex To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to create or modify entries independent…	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.80.1.2.1.1
pingCtlTestName The name of the ping test. This is locally unique, within the scope of a pingCtlOwnerIndex.	OctetString Constraints: range: 0-32	.1.3.6.1.2.1.80.1.2.1.2
pingCtlTargetAddressType Specifies the type of host address to be used at a remote host for performing a ping operation.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.80.1.2.1.3
pingCtlTargetAddress Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the value of the corresponding pingCtlTargetAddressType. A value for this ob…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.80.1.2.1.4
pingCtlDataSize Specifies the size of the data portion to be transmitted in a ping operation, in octets. Whether this value can be applied depends on the selected implementation method for performing a ping operation, indicated by pin…	octetsUnsigned32r/w Constraints: range: 0-65507	.1.3.6.1.2.1.80.1.2.1.5
pingCtlTimeOut Specifies the time-out value, in seconds, for a remote ping operation.	secondsUnsigned32r/w Constraints: range: 1-60	.1.3.6.1.2.1.80.1.2.1.6
pingCtlProbeCount Specifies the number of times to perform a ping operation at a remote host as part of a single ping test.	probesUnsigned32r/w Constraints: range: 1-15	.1.3.6.1.2.1.80.1.2.1.7
pingCtlAdminStatus Reflects the desired state that a pingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this pingCtlEntry. disabled(2) - Deactivate the test as defined…	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.2.1.80.1.2.1.8
pingCtlDataFill The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet. The option of selecting a data fill pattern can be useful when links…	OctetStringr/w Constraints: range: 0-1024	.1.3.6.1.2.1.80.1.2.1.9
pingCtlFrequency The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of pr…	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.2.1.10
pingCtlMaxRows The maximum number of corresponding entries allowed in the pingProbeHistoryTable. An implementation of this MIB will remove the oldest corresponding entry in the pingProbeHistoryTable to allow the addition of an new en…	rowsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.2.1.11
pingCtlStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.2.1.80.1.2.1.12
pingCtlTrapGeneration The value of this object determines when and whether to generate a notification for this entry: probeFailure(0) - Generate a pingProbeFailed notification subject to the value of pingCtlTrapProbe…	Bitsr/w Enumerated Values: 0 probeFailure 1 testFailure 2 testCompletion	.1.3.6.1.2.1.80.1.2.1.13
pingCtlTrapProbeFailureFilter The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION. Setting BIT probeFailure(0) of object pingCtlTrapGeneration to '1' implies that a pingProbeFailed NOTIFICATIO…	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.2.1.80.1.2.1.14
pingCtlTrapTestFailureFilter The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION. Setting BIT testFailure(1) of object pingCtlTrapGeneration to '1' implies that a pingTestFailed…	Unsigned32r/w Constraints: range: 0-15	.1.3.6.1.2.1.80.1.2.1.15
pingCtlType The value of this object is used either to report or to select the implementation method to be used for calculating a ping response time. The value of this object MAY be selected from pingImplementationTypeDomains. …	ObjectIdentifierr/w	.1.3.6.1.2.1.80.1.2.1.16
pingCtlDescr The purpose of this object is to provide a descriptive name of the remote ping test.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.80.1.2.1.17
pingCtlSourceAddressType Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when a ping operation is performed.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.80.1.2.1.18
pingCtlSourceAddress Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to select the addre…	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.80.1.2.1.19
pingCtlIfIndex Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface. A value of zero for this object means that this option is …	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.2.1.80.1.2.1.20
pingCtlByPassRouteTable The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.80.1.2.1.21
pingCtlDSField Specifies the value to store in the Type of Service (TOS) octet in the IPv4 header or in the Traffic Class octet in the IPv6 header, respectively, of the IP packet used to encapsulate the ping probe. The …	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.2.1.80.1.2.1.22
pingCtlRowStatus This object allows entries to be created and deleted in the pingCtlTable. Deletion of an entry in this table results in the deletion of all corresponding (same pingCtlOwnerIndex and pingCtlTestName index values) pingRe…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.80.1.2.1.23

Defines the Ping Results Table for providing
the capability of performing ping operations at
a remote host.  The results of these operations are
stored in the pingResultsTable and the pingProbeHistoryTable.
          
An entry is added to the pingResultsTable when an
pingCtlEntry is started by successful transition
of its pingCtlAdminStatus object to enabled(1).
          
If the object pingCtlAdminStatus already has the value
enabled(1), and if the corresponding pingResultsOperStatus
object has the value completed(3), then successfully writing
enabled(1) to object pingCtlAdminStatus re-initializes the
already existing entry in the pingResultsTable.  The values
of objects in the re-initialized entry are the same as the
values of objects in a new entry would be.
          
An entry is removed from the pingResultsTable when
its corresponding pingCtlEntry is deleted.

pingResultsEntry row .1.3.6.1.2.1.80.1.3.1

Defines an entry in the pingResultsTable. The
pingResultsTable has the same indexing as the
pingCtlTable so that a pingResultsEntry
corresponds to the pingCtlEntry that caused it to
be created.

Indexes

pingCtlOwnerIndex pingCtlTestName

Column	Syntax	OID
pingResultsOperStatus Reflects the operational state of a pingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped. completed(3) - Test is completed.	Enumeration Enumerated Values: 1 enabled 2 disabled 3 completed	.1.3.6.1.2.1.80.1.3.1.1
pingResultsIpTargetAddressType This object indicates the type of address stored in the corresponding pingResultsIpTargetAddress object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.80.1.3.1.2
pingResultsIpTargetAddress This object reports the IP address associated with a pingCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero-length octet string when a DNS name is …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.80.1.3.1.3
pingResultsMinRtt The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.3.1.4
pingResultsMaxRtt The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.3.1.5
pingResultsAverageRtt The current average ping round-trip-time (RTT).	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.3.1.6
pingResultsProbeResponses Number of responses received for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.	responsesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.3.1.7
pingResultsSentProbes The value of this object reflects the number of probes sent for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.	probesSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.3.1.8
pingResultsRttSumOfSquares This object contains the sum of the squares for all ping responses received. Its purpose is to enable standard deviation calculation. The value of this object MUST be reported as 0 when no ping responses have been rec…	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.3.1.9
pingResultsLastGoodProbe Date and time when the last response was received for a probe.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.80.1.3.1.10

Defines a table for storing the results of ping
operations.  The number of entries in this table is
limited per entry in the pingCtlTable by the value
of the corresponding pingCtlMaxRows object.
          
An entry in this table is created when the result of
a ping probe is determined.  The initial 2 instance
identifier index values identify the pingCtlEntry
that a probe result (pingProbeHistoryEntry) belongs
to.  An entry is removed from this table when
its corresponding pingCtlEntry is deleted.
          
An implementation of this MIB will remove the oldest
entry in the pingProbeHistoryTable of the
corresponding entry in the pingCtlTable to allow
the addition of an new entry once the number of rows
in the pingProbeHistoryTable reaches the value
specified by pingCtlMaxRows for the corresponding
entry in the pingCtlTable.

pingProbeHistoryEntry row .1.3.6.1.2.1.80.1.4.1

Defines an entry in the pingProbeHistoryTable.
The first two index elements identify the
pingCtlEntry that a pingProbeHistoryEntry belongs
to. The third index element selects a single
probe result.

Indexes

pingCtlOwnerIndex pingCtlTestName pingProbeHistoryIndex

Column	Syntax	OID
pingProbeHistoryIndex An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that a probe result (pingProbeHistoryEntry) belongs to. …	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.2.1.80.1.4.1.1
pingProbeHistoryResponse The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.	millisecondsSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.80.1.4.1.2
pingProbeHistoryStatus The result of a particular probe done by a remote host.	OperationResponseStatus Type Values: 1 responseReceived 2 unknown 3 internalError 4 requestTimedOut 5 unknownDestinationAddress 6 noRouteToTarget 7 interfaceInactiveToTarget 8 arpFailure 9 maxConcurrentLimitReached 10 unableToResolveDnsName 11 invalidHostAddress	.1.3.6.1.2.1.80.1.4.1.3
pingProbeHistoryLastRC The last implementation-method-specific reply code received. If the ICMP Echo capability is being used, then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.80.1.4.1.4
pingProbeHistoryTime Timestamp for when this probe result was determined.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.80.1.4.1.5