pingCtlDSField

DISMAN-PING-MIB · .1.3.6.1.2.1.80.1.2.1.22

Object

column r/w Unsigned32

Specifies the value to store in the Type of Service
(TOS) octet in the IPv4 header or in the Traffic
Class octet in the IPv6 header, respectively, of the
IP packet used to encapsulate the ping probe.
              
The octet to be set in the IP header contains the
Differentiated Services (DS) Field in the six most
significant bits.
              
This option can be used to determine what effect an
explicit DS Field setting has on a ping response.
Not all values are legal or meaningful.  A value of 0
means that the function represented by this option is
not supported.  DS Field usage is often not supported
by IP implementations, and not all values are supported.
Refer to RFC 2474 and RFC 3260 for guidance on usage of
this field.

Context

MIB: DISMAN-PING-MIB
OID: .1.3.6.1.2.1.80.1.2.1.22
Type: column
Access: readwrite
Status: current
Parent: pingCtlEntry
Table: pingCtlTable
Siblings: 22

Syntax

Unsigned32

Values & Constraints

Object Constraints

range: 0-255

Related Objects

Sibling Objects

Object	Type	Syntax	OID
pingCtlOwnerIndex To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need…	column	OctetString	`.1.3.6.1.2.1.80.1.2.1.1`
pingCtlFrequency The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a…	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.80.1.2.1.10`
pingCtlMaxRows The maximum number of corresponding entries allowed in the pingProbeHistoryTable. An implementation of this MIB will remove the oldest corresponding entry in the pingProbeHistory…	column	rows SNMPv2-SMIUnsigned32	`.1.3.6.1.2.1.80.1.2.1.11`
pingCtlStorageType The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.	column	SNMPv2-TCStorageType	`.1.3.6.1.2.1.80.1.2.1.12`
pingCtlTrapGeneration The value of this object determines when and whether to generate a notification for this entry: probeFailure(0) - Generate a pingProbeFailed notification subj…	column	Bits	`.1.3.6.1.2.1.80.1.2.1.13`
pingCtlTrapProbeFailureFilter The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION. Setting BIT probeFailure(0) of object pingCtlTrapGeneration to '1' im…	column	Unsigned32	`.1.3.6.1.2.1.80.1.2.1.14`
pingCtlTrapTestFailureFilter The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION. Setting BIT testFailure(1) of object pingCtlTrapGenerat…	column	Unsigned32	`.1.3.6.1.2.1.80.1.2.1.15`
pingCtlType The value of this object is used either to report or to select the implementation method to be used for calculating a ping response time. The value of this object MAY be selected…	column	ObjectIdentifier	`.1.3.6.1.2.1.80.1.2.1.16`
pingCtlDescr The purpose of this object is to provide a descriptive name of the remote ping test.	column	SNMP-FRAMEWORK-MIBSnmpAdminString	`.1.3.6.1.2.1.80.1.2.1.17`
pingCtlSourceAddressType Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when a ping operation is performed.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.2.1.80.1.2.1.18`
pingCtlSourceAddress Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, thi…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.2.1.80.1.2.1.19`
pingCtlTestName The name of the ping test. This is locally unique, within the scope of a pingCtlOwnerIndex.	column	OctetString	`.1.3.6.1.2.1.80.1.2.1.2`
pingCtlIfIndex Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface. A value of zero fo…	column	IF-MIBInterfaceIndexOrZero	`.1.3.6.1.2.1.80.1.2.1.20`
pingCtlByPassRouteTable The purpose of this object is to enable optional bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an at…	column	SNMPv2-TCTruthValue	`.1.3.6.1.2.1.80.1.2.1.21`
pingCtlRowStatus This object allows entries to be created and deleted in the pingCtlTable. Deletion of an entry in this table results in the deletion of all corresponding (same pingCtlOwnerIndex …	column	SNMPv2-TCRowStatus	`.1.3.6.1.2.1.80.1.2.1.23`
pingCtlTargetAddressType Specifies the type of host address to be used at a remote host for performing a ping operation.	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.2.1.80.1.2.1.3`
pingCtlTargetAddress Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the value of the corresponding pingCtlTargetAddress…	column	INET-ADDRESS-MIBInetAddress	`.1.3.6.1.2.1.80.1.2.1.4`
pingCtlDataSize Specifies the size of the data portion to be transmitted in a ping operation, in octets. Whether this value can be applied depends on the selected implementation method for perfo…	column	octets Unsigned32	`.1.3.6.1.2.1.80.1.2.1.5`
pingCtlTimeOut Specifies the time-out value, in seconds, for a remote ping operation.	column	seconds Unsigned32	`.1.3.6.1.2.1.80.1.2.1.6`
pingCtlProbeCount Specifies the number of times to perform a ping operation at a remote host as part of a single ping test.	column	probes Unsigned32	`.1.3.6.1.2.1.80.1.2.1.7`
pingCtlAdminStatus Reflects the desired state that a pingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this pingCtlEntry. disa…	column	Enumeration	`.1.3.6.1.2.1.80.1.2.1.8`
pingCtlDataFill The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet. The option of selecting a da…	column	OctetString	`.1.3.6.1.2.1.80.1.2.1.9`