swL2StpPortProtocolMigration
DES3200-26DC-L2MGMT-MIB ·
.1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.7
Object
When operating in RSTP (version 2) mode, writing TRUE (1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns a FALSE message when read.
Context
- MIB
- DES3200-26DC-L2MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swL2StpPortEntry
- Table
- swL2StpPortTable
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2StpPort The port number of the port for this entry. | column | Integer32 | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.1 |
| swL2StpPortAdminPointToPoint The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue (0) indicates that
this port should always be treated as if it is connected… | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.10 |
| swL2StpPortOperPointToPoint The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.11 |
| swL2StpPortAdminPathCost The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the a… | column | Unsigned32 | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.12 |
| swL2StpPortPriority The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value o… | column | Integer32 | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.13 |
| swL2STPPortState Used to describe the enable/disable state of the loopback
prevention function on a per-port basis. | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.14 |
| swL2StpPortLbd Used to enable or disable the loopback function on the specified port. | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.2 |
| swL2StpPortStatus When the port is enabled, this defines the port's current state as
defined by the Spanning Tree Protocol. If PortEnable is disabled,
the port status will be no-stp-enabled (7). … | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.3 |
| swL2StpPortRole When the port is enabled, this defines the port's current port role
as defined by the Spanning Tree Protocol. If the PortEnable is disabled,
the port status will be nonstp. If t… | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.4 |
| swL2StpPortFBPDU The enable/disable status of the BPDU filtering mechanism as related to this port. | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.5 |
| swL2StpPortLinkState This object indicates the STP port speed and duplex mode. | column | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.6 |
| swL2StpPortAdminEdgePort The administrative value of the Edge Port parameter. A
value of TRUE (1) indicates that this port should be
assumed as an edge-port and a value of FALSE (2) indicates
that this po… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.8 |
| swL2StpPortOperEdgePort The operational value of the Edge Port parameter. The
object is initialized to the value of
swL2StpPortAdminEdgePort and is set to FALSE on reception of
a BPDU packet. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.9 |