DES3200-26DC-L2MGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
54
Rows
54
Columns
282

swDevModuleInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.1.1.3 · 1 row entry · 5 columns
Open in standard view 
This table contains the module information.
swDevModuleInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.1.1.3.1
A list of management information for each unit in the system.
Indexes
swDevModuleInfoUnitID
Column Syntax OID
swDevModuleInfoUnitID
This object indicates the specific unit ID in the stacking/chassis
table.
Integer32
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.113.12.1.2.1.1.3.1.1
swDevModuleInfoModuleName
A text string containing the name of the module.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.11.113.12.1.2.1.1.3.1.3
swDevModuleInfoReversion
A text string containing the version (name or number) of the module.
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.171.11.113.12.1.2.1.1.3.1.4
swDevModuleInfoSerial
A text string containing the serial number or serial name of the module.
OctetString
Constraints:
range: 0-9
 .1.3.6.1.4.1.171.11.113.12.1.2.1.1.3.1.5
swDevModuleInfoDescription
A text string containing a description of the
module.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.12.1.2.1.1.3.1.6

swL2DevCtrlCFMPortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.1.2.21.2 · 1 row entry · 2 columns
Open in standard view 
A table containing the CFM state of specified ports.
swL2DevCtrlCFMPortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.1.2.21.2.1
The entry of the CFM state on specified ports.
Indexes
swL2DevCtrlCFMPortIndex
Column Syntax OID
swL2DevCtrlCFMPortIndex
This object indicates the port number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.1.2.21.2.1.1
swL2DevCtrlCFMPortState
This object indicates the CFM state by port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.1.2.21.2.1.2

swL2VlanStaticTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.2.1 · 1 row entry · 2 columns
Open in standard view 
A table containing static configuration information for
each VLAN configured into the device by (local or
network) management. All entries are permanent and will
be restored after the device is reset.
swL2VlanStaticEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.2.1.1
Static information for a VLAN configured into this
device by (local or network) management.
Indexes
swL2VlanIndex
Column Syntax OID
swL2VlanIndex
The VLAN-ID or other identifier referring to this VLAN.
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.113.12.1.2.2.1.1.1
swL2VLANAdvertisement
This object indicates if the advertisement is active or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.2.1.1.2

swL2VlanPortInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.2.3 · 1 row entry · 3 columns
Open in standard view 
A table containing the VLAN and port role information of each port.
swL2VlanPortInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.2.3.1
The table entry of VLAN port information.
Indexes
swL2VlanPortInfoPortIndex swL2VlanPortInfoVid
Column Syntax OID
swL2VlanPortInfoPortIndex
The port index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.2.3.1.1
swL2VlanPortInfoVid
The VLAN ID assigned to a special port
VlanId
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.113.12.1.2.2.3.1.2
swL2VlanPortInfoPortRole
The port role of a special port. When the role is 'other', it means this port does not belong to the VLAN.
Enumeration
Enumerated Values:
1other
2untagged
3tagged
4dynamic
5forbidden
 .1.3.6.1.4.1.171.11.113.12.1.2.2.3.1.3

swL2SubnetVLANTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.2.4 · 1 row entry · 5 columns
Open in standard view 
A table containing the subnet VLAN information.
swL2SubnetVLANEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.2.4.1
The entry of subnet VLAN information.
Indexes
swL2SubnetVLANIPAddress swL2SubnetVLANIPMask
Column Syntax OID
swL2SubnetVLANIPAddress
This object indicates the IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.2.4.1.1
swL2SubnetVLANIPMask
This object indicates the IP mask.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.2.4.1.2
swL2SubnetVLANID
This object indicates the VLAN ID.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.11.113.12.1.2.2.4.1.3
swL2SubnetVLANPriority
This object indicates the priority.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.12.1.2.2.4.1.4
swL2SubnetVLANRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.2.4.1.5

swL2VlanPrecedenceTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.2.5 · 1 row entry · 2 columns
Open in standard view 
A table containing the VLAN classification precedence information of each port.
swL2VlanPrecedenceEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.2.5.1
The entry of VLAN classification precedence information.
Indexes
swL2VlanPrecedencePortIndex
Column Syntax OID
swL2VlanPrecedencePortIndex
This object indicates the port index.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.2.5.1.1
swL2VlanPrecedenceClassification
This object indicates the VLAN classification precedence.
Enumerationr/w
Enumerated Values:
1mac-based
2subnet-based
 .1.3.6.1.4.1.171.11.113.12.1.2.2.5.1.2

swL2PortInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.1 · 1 row entry · 8 columns
Open in standard view 
A table that contains information about every port.
swL2PortInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1
A list of information for each port of the device.
Indexes
swL2PortInfoPortIndex swL2PortInfoMediumType
Column Syntax OID
swL2PortInfoPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.1
swL2PortInfoMediumType
Indicates the medium type of the port number.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.2
swL2PortInfoUnitID
Indicates the ID of the unit in the system.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.3
swL2PortInfoType
This object indicates the connector type of this port.
Enumeration
Enumerated Values:
1portType-100Base-TX
2portType-100Base-FX
3portType-100Base-FL
4portType-1000Base-TX
5portType-1000Base-SX
6portType-1000Base-LX
7portType-1000Base-SX-GBIC
8portType-1000Base-LX-GBIC
9portType-1000Base-TX-GBIC
10portType-1000Base-1394
11portType-1000Base-TX-GBIC-COMBO
12portType-1000Base-none-GBIC
13portType-1000Base-SX-MGBIC
14portType-1000Base-LX-MGBIC
15portType-1000Base-TX-MGBIC
16portType-1000Base-none-MGBIC
17portType-SIO
18portType-10G
19portType-10G-xenpak-1310nm
20portType-10G-xenpak-850nm
21portType-10G-xenpak-empty
22portType-10G-xfp-1310nm
23portType-10G-xfp-850nm
24portType-10G-xfp-empty
25portType-none
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.4
swL2PortInfoLinkStatus
This object indicates the port link status.
Enumeration
Enumerated Values:
1other
2link-pass
3link-fail
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.5
swL2PortInfoNwayStatus
This object indicates the port speed and duplex mode.
Enumeration
Enumerated Values:
0other
1empty
2link-down
3half-10Mbps
4full-10Mbps
5half-100Mbps
6full-100Mbps
7half-1Gigabps
8full-1Gigabps
9full-10Gigabps
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.6
swL2PortInfoModuleType
This object indicates the module type of this port.
Enumeration
Enumerated Values:
0none
1moduleType-COMBO
2moduleType-1394
3moduleType-1000T
4moduleType-MGBIC
5moduleType-1P-SC-SX
6moduleType-2P-SC-SX
7moduleType-1P-SC-LX
8moduleType-2P-SC-LX
9moduleType-1P-TX
10moduleType-2P-TX
11moduleType-1P-MTRJ-SX
12moduleType-2P-MTRJ-SX
13moduleType-1P-MTRJ-LX
14moduleType-2P-MTRJ-LX
15moduleType-1P-GBIC
16moduleType-2P-GBIC
17moduleType-1P-GBIC-1P-TX
18moduleType-1P-GBIC-1P-STACK
19moduleType-2P-STACK
20moduleType-2P-100FX
21moduleType-1P-100FX
22moduleType-2P-100FX-NEW
23moduleType-1P-100FL
24moduleType-2P-100FL
25moduleType-2P-100TX
26moduleType-BaseModule-24PORT
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.7
swL2PortInfoErrorDisabled
This object indicates the blocking type of this port.
Enumeration
Enumerated Values:
0none
1storm
2stp-lbd
3unknow
4ctp-lbd
 .1.3.6.1.4.1.171.11.113.12.1.2.3.1.1.8

swL2PortCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.2 · 1 row entry · 11 columns
Open in standard view 
A table that contains control information about every port.
swL2PortCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1
A list of control information for each port on the device.
Indexes
swL2PortCtrlPortIndex swL2PortCtrlMediumType
Column Syntax OID
swL2PortCtrlPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.1
swL2PortCtrlMediumType
Indicates the medium type of the port number.
Enumeration
Enumerated Values:
1copper
2fiber
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.2
swL2PortCtrlUnitIndex
Indicates the ID of the unit in the device
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.3
swL2PortCtrlAdminState
This object decides if the port is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.4
swL2PortCtrlNwayState
Chose the port speed, duplex mode, and N-Way function mode.
Enumerationr/w
Enumerated Values:
1other
2nway-enabled
3nway-disabled-10Mbps-Half
4nway-disabled-10Mbps-Full
5nway-disabled-100Mbps-Half
6nway-disabled-100Mbps-Full
7nway-disabled-1Gigabps-Half
8nway-disabled-1Gigabps-Full
9nway-disabled-1Gigabps-Full-master
10nway-disabled-1Gigabps-Full-slave
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.5
swL2PortCtrlFlowCtrlState
The flow control mechanism is different between full duplex
mode and half duplex mode. For half duplex mode, the jamming
signal is asserted. For full duplex mode, the IEEE 802.3x flow
control function sends PAUSE fram…
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.6
swL2PortCtrlLearningState
This object decides if the port is locked or not.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.7
swL2PortCtrlMACNotifyState
This object sets each port's MAC notification state.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.8
swL2PortCtrlMDIXState
This object configures the MDIX setting of the port.
Enumerationr/w
Enumerated Values:
1auto
2normal
3cross
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.10
swL2PortCtrlAutoNegRestart
If the value of this object is set to restart(1) then this will force
auto-negotiation to begin link renegotiation. If auto-negotiation
signaling is disabled, a write to this object has no effect.
Setting the value of…
Enumerationr/w
Enumerated Values:
1restart
2norestart
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.11
swL2PortCtrlAutoNegCapAdvertisedBits
A value that uniquely identifies the set of capabilities advertised
by the local auto-negotiation entity.

Capabilities in this object that are not available in
swL2PortAutoNegInfoCapabilityBits cannot …
IANAifMauAutoNegCapBitsr/w
Textual Convention: IANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
 .1.3.6.1.4.1.171.11.113.12.1.2.3.2.1.12

swL2PortCableDiagnosisTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.5 · 1 row entry · 6 columns
Open in standard view 
A table that contains cable diagnostic information about every port.
swL2PortCableDiagnosisEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1
A list with cable diagnostic information for each port of the device.
Indexes
swL2PortCableDiagnosisPortIndex swL2PortCableDiagnosisPairIndex
Column Syntax OID
swL2PortCableDiagnosisPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1.1
swL2PortCableDiagnosisPairIndex
Indicates the pair index of each port.
Pair 1 means pin 3 and 6 of the connector.
Pair 2 means pin 1 and 2 of the connector.
Pair 3 means pin 7 and 8 of the connector.

Pair 4 means pin 4 and 5 of the conn…
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1.2
swL2PortCableDiagnosisCableStatus
This object indicates the cable status.
Enumeration
Enumerated Values:
0ok
1open
2short
3open-short
4not-support
5unknown
 .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1.3
swL2PortCableDiagnosisPairStatus
This object indicates the status of the pair.
Enumeration
Enumerated Values:
0ok
1open
2short
3fail
4not-supported
5unknown
 .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1.4
swL2PortCableDiagnosisPairLength
This object indicates the approx. length or length to failure of
the pair. The unit value is in meters.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1.5
swL2PortCableDiagnosisPairLengthInaccuracy
This object indicates the inaccuracy of a pair length. The unit value is in meters.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.3.5.1.6

swL2PortCounterCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.6 · 1 row entry · 2 columns
Open in standard view 
A table that is used to clear counter information about every port.
swL2PortCounterCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.6.1
A list of entries used to clear the counter information for each port of the device.
Indexes
swL2PortCounterCtrlPortIndex
Column Syntax OID
swL2PortCounterCtrlPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.6.1.1
swL2PortCounterClearCtrl
This object indicates whether to clear the counters for each port of the device or not.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.113.12.1.2.3.6.1.2

swL2PortErrTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.7 · 1 row entry · 4 columns
Open in standard view 
A table that contains error information for each port.
swL2PortErrEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.7.1
A list of information regarding port errors on the device.
Indexes
swL2PortErrPortIndex
Column Syntax OID
swL2PortErrPortIndex
This object indicates the module's port number.(1..Max port number in
the module).
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.7.1.1
swL2PortErrPortState
This object indicates if the port state is enabled or disabled.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.7.1.2
swL2PortErrPortConnStatus
This object indicates whether the Port Status is err-disabled or not.
Enumeration
Enumerated Values:
1other
2err-disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.7.1.3
swL2PortErrPortReason
This object describes if the reason for the port error is STP LBD or Storm control.
Enumeration
Enumerated Values:
1stp-lbd
2storm-control
3ctp-lbd
 .1.3.6.1.4.1.171.11.113.12.1.2.3.7.1.4

swL2PortAutoNegInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.8 · 1 row entry · 6 columns
Open in standard view 
A table that contains information about every port's auto negotiation status.
swL2PortAutoNegInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1
A list of information for each port auto negotiation of the device.
Indexes
swL2PortAutoNegInfoPortIndex
Column Syntax OID
swL2PortAutoNegInfoPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1.1
swL2PortAutoNegInfoAdminStatus
If the value of this object is disabled(2) then the interface will act as
it would if it had no auto-negotiation signaling.
The status is affect by setting swL2PortCtrlNwayState.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1.2
swL2PortAutoNegInfoCapabilityBits
A value that uniquely identifies the set of capabilities of the local
auto-negotiation entity. Note that interfaces that support this MIB may
have capabilities that extend beyond the scope of this MIB.
…
IANAifMauAutoNegCapBits
Textual Convention: IANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
 .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1.3
swL2PortAutoNegInfoCapAdvertisedBits
A value that uniquely identifies the set of capabilities advertised by the
local auto-negotiation entity.

Capabilities in this object that are not available in
swL2PortAutoNegCapabilityBits cannot be en…
IANAifMauAutoNegCapBits
Textual Convention: IANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
 .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1.4
swL2PortAutoNegInfoCapReceivedBits
A value that uniquely identifies the set of capabilities received from the
remote auto-negotiation entity.

Note that interfaces that support this MIB may be attached to remote
auto-negotiation entiti…
IANAifMauAutoNegCapBits
Textual Convention: IANAifMauAutoNegCapBits Bits
Type Values:
0bOther
1b10baseT
2b10baseTFD
3b100baseT4
4b100baseTX
5b100baseTXFD
6b100baseT2
7b100baseT2FD
8bFdxPause
9bFdxAPause
10bFdxSPause
11bFdxBPause
12b1000baseX
13b1000baseXFD
14b1000baseT
15b1000baseTFD
 .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1.5
swL2PortAutoNegInfoConfig
A value indicating the current status of the
auto-negotiation process. The enumeration
parallelDetectFail(5) maps to a failure in
parallel detection as defined in 28.2.3.1 of
[IEEE802.3].
Enumeration
Enumerated Values:
1other
2configuring
3complete
4disabled
5parallelDetectFail
 .1.3.6.1.4.1.171.11.113.12.1.2.3.8.1.6

swL2PortDropCounterTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.9 · 1 row entry · 5 columns
Open in standard view 
A table that contains information for each port drop counter.
swL2PortDropCounterEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.9.1
A list of information for each port auto negotiation of the device.
Indexes
swL2PortDropCounterPortIndex
Column Syntax OID
swL2PortDropCounterPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.9.1.1
swL2PortBufferFullDrops
The total number of packets discarded while buffer full.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.3.9.1.2
swL2PortACLDrops
The total number of packets denied by ACLs.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.3.9.1.3
swL2PortMulticastDrops
The total number of multicast packet that is discarded.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.3.9.1.4
swL2PortVLANIngressDrops
The total number of packets discarded by VLAN ingress checking.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.3.9.1.5

swL2PortJumboFrameCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.10 · 1 row entry · 2 columns
Open in standard view 
A table that contains information for each port's jumbo frame information.
swL2PortJumboFrameCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.10.1
A list of information for each port's jumbo frame of the device.
Indexes
swL2PortJumboFrameCtrlPortIndex
Column Syntax OID
swL2PortJumboFrameCtrlPortIndex
This object indicates the module's port number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.3.10.1.1
swL2PortJumboFrameCtrlState
This object indicates the jumbo frame state on a specified port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.3.10.1.2

swL2PortSfpInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.3.11 · 1 row entry · 11 columns
Open in standard view 
A table that contains information for each sfp pluged in port.
swL2PortSfpInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1
A list of information for each sfp pluged in port.
Indexes
swL2PortSfpInfoPortIndex
Column Syntax OID
swL2PortSfpInfoPortIndex
This object indicates the module's port number.(1..Max port
number in the module)
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.1
swL2PortSfpInfoConnectType
The ConnectType of sfp informaiton.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.2
swL2PortSfpInfoVendorName
The vendor name of sfp informaiton.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.3
swL2PortSfpInfoVendorPN
The vendor PN of sfp informaiton.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.4
swL2PortSfpInfoVendorSN
The vendor SN of sfp informaiton.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.5
swL2PortSfpInfoVendorOUI
The vendor OUI of sfp information.
OctetString
Constraints:
range: 1-6
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.6
swL2PortSfpInfoVendorRev
The vendor Rev of sfp information.
OctetString
Constraints:
range: 1-4
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.7
swL2PortSfpInfoDateCode
The date code of sfp information.
OctetString
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.8
swL2PortSfpInfoFiberType
The fiber type of sfp information.
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.9
swL2PortSfpInfoBaudRate
The baud rate of sfp information.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.10
swL2PortSfpInfoWavelength
The wavelength of sfp information.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.3.11.1.11

swL2DiffServTypeCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.4.1 · 1 row entry · 2 columns
Open in standard view 
A table that contains the Differentiated Service (DiffServ) type information of each port.
swL2DiffServTypeCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.4.1.1
A list of DiffServ type information for each port of the device.
Indexes
swL2DiffServTypeCtrlPortIndex
Column Syntax OID
swL2DiffServTypeCtrlPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.12.1.2.4.1.1.1
swL2DiffServTypeCtrlDiffServType
The DiffServ type of this port.
disabled (1) --- no DiffServ and ToS field modification ability.
DSCP (2) --- indicates if the associated port's DSCP control information is in
the swL2DiffServDS…
Enumerationr/w
Enumerated Values:
1disabled
2dscp
3tos
 .1.3.6.1.4.1.171.11.113.12.1.2.4.1.1.2

swL2DiffServDSCPCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.4.2 · 1 row entry · 3 columns
Open in standard view 
A table that contains DSCP (Differentiated Service Code Point) control
information.
swL2DiffServDSCPCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.4.2.1
A list of DSCP control information for each port.
Indexes
swL2DiffServDSCPCtrlPortIndex
Column Syntax OID
swL2DiffServDSCPCtrlPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.12.1.2.4.2.1.1
swL2DiffServDSCPCtrlMode
The DSCP mode of this port.
dscp-Force-Overwrite(1) --- The DSCP field for the IP packet is replaced by the specific
value regardless of the DSCP of the incoming packet.
dscp-Change-If-Zero(…
Enumerationr/w
Enumerated Values:
1dscp-Force-Overwrite
2dscp-Change-If-Zero
 .1.3.6.1.4.1.171.11.113.12.1.2.4.2.1.2
swL2DiffServDSCPCtrlValue
The DSCP value of this port.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.11.113.12.1.2.4.2.1.3

swL2DiffServTOSCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.4.3 · 1 row entry · 3 columns
Open in standard view 
A table that contains ToS (Type of Service) control
information.
swL2DiffServTOSCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.4.3.1
A list of ToS control information for each port.
Indexes
swL2DiffServTOSCtrlPortIndex
Column Syntax OID
swL2DiffServTOSCtrlPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.12.1.2.4.3.1.1
swL2DiffServTOSCtrlMode
The ToS mode of this port.
tos-Force-Overwrite(1) --- The IP ToS precedence has changed to the specific value.
tos-TOS-Overwrite-802dot1p(2) --- If the incoming packet is an IPv4 packet, change the 802.1p
…
Enumerationr/w
Enumerated Values:
1tos-Force-Overwrite
2tos-TOS-Overwrite-802dot1p
3tos-802dot1p-Overwrite-TOS
 .1.3.6.1.4.1.171.11.113.12.1.2.4.3.1.2
swL2DiffServTOSCtrlValue
This object is used only if swL2DiffServTOSCtrlMode is tos-Force-Overwrite(1)
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.12.1.2.4.3.1.3

swL2MulticastFilterProfileTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.5.1 · 1 row entry · 3 columns
Open in standard view 
A table that contains information about multicast filter profile.
swL2MulticastFilterProfileEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.5.1.1
A list of information for each multicast filter profile.
Indexes
swL2MulticastFilterProfileIndex
Column Syntax OID
swL2MulticastFilterProfileIndex
Indicates index for each profile.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.11.113.12.1.2.5.1.1.1
swL2MulticastFilterProfileName
Specifies a profile name for each multicast filter profile.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.11.113.12.1.2.5.1.1.2
swL2MulticastFilterStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.5.1.1.3

swL2MulticastFilterProfileAddressTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.5.2 · 1 row entry · 4 columns
Open in standard view 
A table that contains information about multicast filter address.
swL2MulticastFilterProfileAddressEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.5.2.1
A list of information for each multicast filter address.
Indexes
swL2MulticastFilterProfileIdIndex swL2MulticastFilterFromIp swL2MulticastFilterToIp
Column Syntax OID
swL2MulticastFilterProfileIdIndex
Indicates index for each profile.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.11.113.12.1.2.5.2.1.1
swL2MulticastFilterFromIp
Specifies the head IP address of a multicast address range which will
be binded to a multicast filter profile.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.5.2.1.2
swL2MulticastFilterToIp
Specifies the tail IP address of a multicast address range which will
be binded to a multicast filter profile.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.5.2.1.3
swL2MulticastFilterAddressState
This object indicates the status of this entry.
Setting value to createAndGo (4) will add the multicast address list specified in
swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile.
Setti…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.5.2.1.4

swL2LimitedMulticastFilterPortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.5.3 · 1 row entry · 4 columns
Open in standard view 
A table that is used to bind the port to the profile ID.
swL2LimitedMulticastFilterPortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.5.3.1
A list of information that is used to bind the port to the profile ID.
Indexes
swL2LimitedMulticastFilterPortIndex
Column Syntax OID
swL2LimitedMulticastFilterPortIndex
Specifies the port as an index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.5.3.1.1
swL2LimitedMulticastFilterPortAccess
This object indicates the access status for each port.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.11.113.12.1.2.5.3.1.2
swL2LimitedMulticastFilterPortProfileID
This object specifies a profile ID list for each port.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.113.12.1.2.5.3.1.3
swL2LimitedMulticastFilterPortProfileStatus
Controls the multicast filter profile list which binds to each port.
When set to add (2), the multicast filter profile ID list which is specified in
swL2LimitedMulticastFilterPortProfileID will be bound to the port.
Whe…
Enumerationr/w
Enumerated Values:
1other
2add
3delete
 .1.3.6.1.4.1.171.11.113.12.1.2.5.3.1.4

swL2MulticastFilterPortMaxGroupTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.5.4 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about max group numbers based on each port.
swL2MulticastFilterPortMaxGroupEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.5.4.1
A list of max group number information for each port.
Indexes
swL2MulticastFilterPortMaxGroupPortIndex
Column Syntax OID
swL2MulticastFilterPortMaxGroupPortIndex
Specifies the port number as a table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.5.4.1.1
swL2MulticastFilterPortMaxGroup
Specifies maximum multicast filter group numbers for each port.
The default value is 256.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.171.11.113.12.1.2.5.4.1.2

swL2LimitedMulticastFilterVIDTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.5.5 · 1 row entry · 4 columns
Open in standard view 
A table that is used to bind the VID to the profile ID.
swL2LimitedMulticastFilterVIDEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.5.5.1
A list of information that is used to bind the VID to the profile ID.
Indexes
swL2LimitedMulticastFilterVIDIndex
Column Syntax OID
swL2LimitedMulticastFilterVIDIndex
Specifies the VID as an index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.5.5.1.1
swL2LimitedMulticastFilterVIDAccess
This object indicates the access status for each VID.
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.11.113.12.1.2.5.5.1.2
swL2LimitedMulticastFilterVIDProfileID
This object specifies a profile ID list for each VID.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.113.12.1.2.5.5.1.3
swL2LimitedMulticastFilterVIDProfileStatus
Controls the multicast filter profile list which binds to each VID.
When set to add (2), the multicast filter profile ID list which is specified in
swL2LimitedMulticastFilterVIDProfileID will be bound to the VID.
When s…
Enumerationr/w
Enumerated Values:
1other
2add
3delete
 .1.3.6.1.4.1.171.11.113.12.1.2.5.5.1.4

swL2MulticastFilterVIDMaxGroupTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.5.6 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about max group numbers based on VID.
swL2MulticastFilterVIDMaxGroupEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.5.6.1
A list of max group number information for each VID.
Indexes
swL2MulticastFilterVIDMaxGroupVIDIndex
Column Syntax OID
swL2MulticastFilterVIDMaxGroupVIDIndex
Specifies the VID number as a table index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.5.6.1.1
swL2MulticastFilterVIDMaxGroup
Specifies maximum multicast filter group numbers for each VID.
The default value is 256.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.171.11.113.12.1.2.5.6.1.2

swL2QOSBandwidthControlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.6.1 · 1 row entry · 5 columns
Open in standard view 
.
swL2QOSBandwidthControlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.6.1.1
A list of information contained in the swL2QOSBandwidthControlTable.
Indexes
swL2QOSBandwidthPortIndex
Column Syntax OID
swL2QOSBandwidthPortIndex
Indicates the port.
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.171.11.113.12.1.2.6.1.1.1
swL2QOSBandwidthRxRate
Indicates RX Rate (Mbit/sec) of the specified port. A value of 10000 means no limit.
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.171.11.113.12.1.2.6.1.1.2
swL2QOSBandwidthTxRate
Indicates TX Rate(Mbit/sec) of the specified port. A value of 10000 means no limit.
Integer32r/w
Constraints:
range: 1-10000
 .1.3.6.1.4.1.171.11.113.12.1.2.6.1.1.3
swL2QOSBandwidthRadiusRxRate
The Rx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Rx Rate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.6.1.1.4
swL2QOSBandwidthRadiusTxRate
The Tx Rate value comes from the RADIUS server,
If an 802.1X port is authenticated, this value
will overwrite the locally configured Tx Rate.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.6.1.1.5

swL2QOSSchedulingTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.6.2 · 1 row entry · 4 columns
Open in standard view 
.
swL2QOSSchedulingEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.6.2.1
A list of information contained in the swL2QOSSchedulingTable.
Indexes
swL2QOSSchedulingClassIndex
Column Syntax OID
swL2QOSSchedulingClassIndex
Indicates the hardware queue number.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.12.1.2.6.2.1.1
swL2QOSSchedulingMaxPkts
Indicates the maximum number of packets the hardware priority queue will be allowed
to transmit before allowing the next lowest priority queue to transmit its packets.
a value between 0 and 15 can be specified.
Integer32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.171.11.113.12.1.2.6.2.1.2
swL2QOSSchedulingMechanism
Indicates the mechanism of QoS scheduling.
Enumeration
Enumerated Values:
1strict
2roundrobin
3weightfair
 .1.3.6.1.4.1.171.11.113.12.1.2.6.2.1.3
swL2QOSSchedulingMaxLatency
Indicates the maximum amount of time the hardware priority queue will be allowed
to transmit packets before allowing the next lowest priority queue to begin transmitting
its packets. A value between 0 and 255 can be spe…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.113.12.1.2.6.2.1.4

swL2QOS8021pUserPriorityTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.6.3 · 1 row entry · 2 columns
Open in standard view 
.
swL2QOS8021pUserPriorityEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.6.3.1
A list of information contained in the swL2QOS8021pUserPriorityTable.
Indexes
swL2QOS8021pUserPriorityIndex
Column Syntax OID
swL2QOS8021pUserPriorityIndex
The 802.1p user priority.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.12.1.2.6.3.1.1
swL2QOS8021pUserPriorityClass
The number of the switch's hardware priority queue. The switch has seven hardware
priority queues available. They are numbered between 0 (the lowest priority)
and 6 (the highest priority).
Integer32r/w
Constraints:
range: 0-6
 .1.3.6.1.4.1.171.11.113.12.1.2.6.3.1.2

swL2QOS8021pDefaultPriorityTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.6.4 · 1 row entry · 3 columns
Open in standard view 
.
swL2QOS8021pDefaultPriorityEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.6.4.1
A list of information contained in the swL2QOS8021pDefaultPriorityTable.
Indexes
swL2QOS8021pDefaultPriorityIndex
Column Syntax OID
swL2QOS8021pDefaultPriorityIndex
Indicates the port number.
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.171.11.113.12.1.2.6.4.1.1
swL2QOS8021pDefaultPriority
The priority value assigned to untagged packets received by the
ports on the switch.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.11.113.12.1.2.6.4.1.2
swL2QOS8021pRadiusPriority
Indicates the value of 802.1p comes from RADIUS server.

If an 802.1X port is authenticated,
this value will overwrite the local configured value.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.6.4.1.3

swL2PortSecurityControlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.7.1 · 1 row entry · 5 columns
Open in standard view 
A port security feature which controls the address learning capability and      
traffic forwarding decisions. Each port can be enabled or disabled for this function.
When it is enabled and a number is given, e.g N this will allow N addresses to be
learned on this port, the first N address learned will be locked at this port as
static entries. When the learned addresses number reaches N, any incoming packet 
without learned source addresses are discarded (e.g. dropped) and no more new 
addresses can be learned on this port.
swL2PortSecurityControlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.7.1.1
A list of information contained in the swL2PortSecurityControlTable.
Indexes
swL2PortSecurityPortIndex
Column Syntax OID
swL2PortSecurityPortIndex
Indicates the secured port to lock address learning.
Integer32
Constraints:
range: 1-768
 .1.3.6.1.4.1.171.11.113.12.1.2.7.1.1.1
swL2PortSecurityMaxLernAddr
Indicates allowable number of addresses that can be learned on this port.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.7.1.1.2
swL2PortSecurityMode
Indicates the locking address mode.
In deleteOnTimeout (3) mode - the locked addresses can be aged out after
the aging timer expires. In this mode, when the locked address has aged
out, the number of addresses that can…
Enumerationr/w
Enumerated Values:
1other
2permanent
3deleteOnTimeout
4deleteOnReset
 .1.3.6.1.4.1.171.11.113.12.1.2.7.1.1.3
swL2PortSecurityAdmState
Indicates the administration state of the locking address.
Enumerationr/w
Enumerated Values:
1other
2enable
3disable
 .1.3.6.1.4.1.171.11.113.12.1.2.7.1.1.4
swL2PortSecurityEntryClearCtrl
Used to clear port security entries by port.
Setting this value to 'start' will execute the clear action,
Once cleared, the value returns to 'other'.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.113.12.1.2.7.1.1.5

swL2DhcpRelayCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.8.7 · 1 row entry · 3 columns
Open in standard view 
This table specifies the IP address as a destination to forward
(relay) DHCP packets to.
swL2DhcpRelayCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.8.7.1
A list of information that specifies the IP address as a destination
to forward (relay) DHCP packets to.
Indexes
swL2DhcpRelayCtrlInterfaceName swL2DhcpRelayCtrlServer
Column Syntax OID
swL2DhcpRelayCtrlInterfaceName
The name of the IP interface.
OctetString
Constraints:
range: 1-12
 .1.3.6.1.4.1.171.11.113.12.1.2.8.7.1.1
swL2DhcpRelayCtrlServer
The DHCP server IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.8.7.1.2
swL2DhcpRelayCtrlState
This object indicates the status of this entry.

other (1) - This entry is currently in use but the conditions
under which it will remain so are different from each of
the following values.
invalid…
Enumerationr/w
Enumerated Values:
1other
2invalid
3valid
 .1.3.6.1.4.1.171.11.113.12.1.2.8.7.1.3

swL2TrunkCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.9.3 · 1 row entry · 7 columns
Open in standard view 
This table specifies information about the logical port trunk groups.
swL2TrunkCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1
A list of information about each logical port trunk group.
Indexes
swL2TrunkIndex
Column Syntax OID
swL2TrunkIndex
The index number of the logical port trunk group. The trunk group
number depends on the existence of unit and module.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.1
swL2TrunkName
The name of the logical port trunk group.
OctetStringr/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.2
swL2TrunkMasterPort
This object indicates the master port number of the port trunk
entry. When using Port Trunking, you cannot configure the other
ports of the group except the master port.
Their configuration must be the same as the mast…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.3
swL2TrunkMember
Indicates the number of ports included in this Trunk group.
The trunk port number depends on the existence of the module.
The maximum number of ports is 8 for one trunk group.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.4
swL2TrunkFloodingPort
The object indicates the flooding port number of the port trunk
entry. The first port of the Trunk group is implicitly configured to
be the flooding port.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.5
swL2TrunkType
This object indicates the type of trunk group.
static: is a static trunk group
lacp: is a LACP trunk group.
Enumerationr/w
Enumerated Values:
1other
2static
3lacp
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.6
swL2TrunkState
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.9.3.1.7

swL2TrunkLACPPortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.9.5 · 1 row entry · 2 columns
Open in standard view 
This table specifies which ports are grouped together (this can be up to 8 ports)
into a single logical link.
swL2TrunkLACPPortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.9.5.1
A list of information specifying which ports are grouped together (this can be up to 8 ports)
into a single logical link.
Indexes
swL2TrunkLACPPortIndex
Column Syntax OID
swL2TrunkLACPPortIndex
The index of logical port LACP.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.9.5.1.1
swL2TrunkLACPPortState
The state of a logical port LACP.
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.171.11.113.12.1.2.9.5.1.2

swL2TrunkVLANTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.9.6 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the VLAN trunking feature of the device.
swL2TrunkVLANEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.9.6.1
This object is used to configure the VLAN trunking settings for each port.
Indexes
swL2TrunkVLANPort
Column Syntax OID
swL2TrunkVLANPort
This object indicates the port being configured.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.9.6.1.1
swL2TrunkVLANState
The state of the logical port LACP.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.9.6.1.2

swL2MirrorGroupTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.10.5 · 1 row entry · 6 columns
Open in standard view 
This table specifies information about the mirror group configuration.
swL2MirrorGroupEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1
A list of information about each mirror group configuration.
Indexes
swL2MirrorGroupID
Column Syntax OID
swL2MirrorGroupID
This object indicates the mirror group.
The range of this object is (1..N),
the value of N is project dependent.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1.1
swL2MirrorGroupRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1.2
swL2MirrorGroupState
This object indicates the mirror group state.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1.3
swL2MirrorGroupTargetPort
This object indicates the mirror group target port.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1.4
swL2MirrorGroupSourceIngress
This object indicates the mirror group ingress source ports.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1.5
swL2MirrorGroupSourceEngress
This object indicates the mirror group engress source ports.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.10.5.1.6

swL2IGMPCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.4 · 1 row entry · 15 columns
Open in standard view 
The table controls the VLAN's IGMP function. Its scale depends
on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, 
there is only one entry in the table, with an index of 1. If the            
VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, 
with an index range from 1 to 12.
swL2IGMPCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1
The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.
Indexes
swL2IGMPCtrlVid
Column Syntax OID
swL2IGMPCtrlVid
This object indicates the IGMP control entry's VLAN ID. If the VLAN
is disabled, the VID is always 0 and cannot be changed by management users.
If the VLAN is in Port-Based mode, the VID is arranged from 1 to 12, in a …
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.1
swL2IGMPQueryInterval
The frequency at which IGMP Host-Query packets are
transmitted on this switch.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.2
swL2IGMPMaxResponseTime
The maximum query response time on this switch.
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.3
swL2IGMPRobustness
The Robustness Variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected to have a high packet
loss, the Robustness Variable may be increased. IGMP is
robust to (Robustness Variable-1) pac…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.4
swL2IGMPLastMemberQueryInterval
The Last Member Query Interval is the Max Response Time
inserted into Group-Specific Queries sent in response to
Leave Group messages, and is also the amount of time between
Group-Specific Query messages.
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.5
swL2IGMPHostTimeout obsolete
The timer value for sending IGMP query packets when none were
sent by the host on the LAN. The timer works on a per-VLAN basis.
Our device will be activated to send the query messages if the
timer expires. Please ref…
Integer32r/w
Constraints:
range: 1-16711450
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.6
swL2IGMPRouteTimeout obsolete
The Router Timeout is how long a host must wait after hearing
a Query before it may send any IGMPv2 messages.
Integer32r/w
Constraints:
range: 1-16711450
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.7
swL2IGMPLeaveTimer obsolete
When a query receives a Leave Group message for a group that
has group members on the reception interface, it sends
Group-Specific Queries every swL2IGMPLeaveTimer to the group
being left.
Integer32r/w
Constraints:
range: 1-16711450
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.8
swL2IGMPQueryState
This object decides if the IGMP query is enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.9
swL2IGMPCurrentState
This object indicates the current IGMP query state.
Enumeration
Enumerated Values:
1other
2querier
3non-querier
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.10
swL2IGMPCtrlState
This object indicates the status of this entry.

other (1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
values.
disable…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.11
swL2IGMPFastLeaveState
This object indicates the fast_leave status of this entry.

other (1) - this entry is currently in use but the conditions under
which it will remain so are different from each of the following
valu…
Enumerationr/w
Enumerated Values:
1other
2disable
3enable
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.12
swL2IGMPQueryVersion
Configure the IGMP version of query packet which will be sent by the router.
Integer32r/w
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.13
swL2IGMPRateLimit
Config the rate of IGMP report or leave packet that the switch can
process on a specific VLAN. The rate is specified in packet per second.

The packet that exceeds the limited rate will be dropped.
This se…
Integer32r/w
Constraints:
range: 0-1000
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.14
swL2IGMPReportSuppression
When enabled, multiple IGMP reports or leaves for a specific group (S,G)
will be integrated into only one report before being sent to the router
port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.4.1.15

swL2IGMPQueryInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.5 · 1 row entry · 5 columns
Open in standard view 
This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device.
swL2IGMPQueryInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.5.1
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled.
Indexes
swL2IGMPInfoVid
Column Syntax OID
swL2IGMPInfoVid
This object indicates the VID of the associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of
IGMP control table (swL2IGMPCtrlTable).
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.5.1.1
swL2IGMPInfoQueryCount obsolete
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.5.1.2
swL2IGMPInfoTxQueryCount obsolete
This object indicates the send count of IGMP query messages, on a
per-VLAN basis. In the case of an IGMP timer expiration, the switch
will send IGMP query packets to all related VLAN member ports and
increment this obje…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.5.1.3
swL2IGMPQueryIPAddress
This object identifies the Query IP addresses.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.5.1.4
swL2IGMPQueryExpiryTime
This object indicates the Query Expiry Time.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.5.1.5

swL2IGMPInfoTable

table obsolete
.1.3.6.1.4.1.171.11.113.12.1.2.11.6 · 1 row entry · 7 columns
Open in standard view 
The table containing current IGMP information which was captured by            
this device, provided that the swL2DevCtrlIGMPSnooping and          
swL2IGMPCtrlState of the associated VLAN entries are all enabled. 
Note that the priority of IGMP table entries is lower than the Filtering            
Table, i.e. if there is a table hash collision between entries in the 
IGMP Table and Filtering Table inside the switch's H/W address table, 
then the Filtering Table entry overwrites the colliding entry of the IGMP Table.  
Also see the swL2FilterMgmt description.
swL2IGMPInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1
Information about current IGMP information which was captured by
this device, provided that the swL2DevCtrlIGMPSnooping and the
swL2IGMPCtrlState of associated VLAN entries are all enabled.
Indexes
swL2IGMPVid swL2IGMPGroupIpAddr
Column Syntax OID
swL2IGMPVid obsolete
This object indicates the VID of individual IGMP table entries.
It shows the VID IGMP report information captured on the network.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.1
swL2IGMPGroupIpAddr obsolete
This object identifies group IP addresses which were captured from
IGMP packets, on a per-VLAN basis.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.2
swL2IGMPMacAddr obsolete
This object identifies MAC addresses which correspond
to the swL2IGMPGroupIpAddr, on a per-VLAN basis.
MacAddress
Textual Convention: MacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.3
swL2IGMPPortMap obsolete
This object indicates which ports belong to the same
multicast group, on a per-VLAN basis. Each multicast group has an
octet string which is indicated by a port map. The most significant
bit rep…
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.4
swL2IGMPIpGroupReportCount obsolete
This object indicates how many report packets were received by the
device, that correspond with this entry when the IGMP function is enabled
on a per-VLAN basis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.5
swL2IGMPVersion obsolete
This object identifies the version of IGMP from
IGMP packets, on a per-VLAN basis.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.6
swL2IGMPGroupMode obsolete
When the version of IGMP is v3, this object identifies whether the
group is in INCLUDE or EXCLUDE mode.
Enumeration
Enumerated Values:
1include
2exclude
 .1.3.6.1.4.1.171.11.113.12.1.2.11.6.1.7

swL2IGMPRouterPortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.7 · 1 row entry · 5 columns
Open in standard view 
The information of the router port table.
swL2IGMPRouterPortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.7.1
The entry of swL2IGMPRouterPortTable.
Indexes
swL2IGMPRouterPortVlanid
Column Syntax OID
swL2IGMPRouterPortVlanid
This object indicates the VLAN ID of the router's port entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.7.1.1
swL2IGMPRouterPortVlanName
This object indicates the VLAN name of the router's port entry.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.12.1.2.11.7.1.2
swL2IGMPRouterPortStaticPortList
This object indicates the static portlist of the router's port entry.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.7.1.3
swL2IGMPRouterPortDynamicPortList
This object indicates the dynamic portlist of the router's port entry.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.7.1.4
swL2IGMPRouterPortForbiddenPortList
This object indicates the forbidden portlist of the router's port entry.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.7.1.5

swL2IGMPMulticastVlanTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.8 · 1 row entry · 12 columns
Open in standard view 
Information about the IGMP snooping multicast VLAN table.
swL2IGMPMulticastVlanEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1
The entry of swL2IGMPMulticastVlanTable.
Indexes
swL2IGMPMulticastVlanid
Column Syntax OID
swL2IGMPMulticastVlanid
This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry.
Integer32
Constraints:
range: 2-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.1
swL2IGMPMulticastVlanName
This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.2
swL2IGMPMulticastVlanSourcePort
This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports wil…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.3
swL2IGMPMulticastVlanMemberPort
This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member port…
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.4
swL2IGMPMulticastVlanTagMemberPort
This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.5
swL2IGMPMulticastVlanState
This object can be used to enable or disable the IGMP snooping multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.6
swL2IGMPMulticastVlanReplaceSourceIp
The replacement source IP of this multicast VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.7
swL2IGMPMulticastVlanRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.8
swL2IGMPMulticastVlanRemoveAllMcastAddrListAction
This object indicates whether to remove all the multicast address
lists from the IGMP multicast VLAN or not.
Enumerationr/w
Enumerated Values:
1other
2start
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.9
swL2IGMPMulticastVlanUntagSourcePort
This object indicates the untagged member ports to add to the multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.10
swL2IGMPMulticastVlanRemapPriority
The priority value (0 to 7) to be associated with the data traffic
to be forwarded on the multicast VLAN.
When set to 8, the packet's original priority will be used.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.11
swL2IGMPMulticastVlanReplacePriority
Specifies that a packet's priority will be changed by the switch
based on the remap priority. This flag will only take effect
when remap priority is set.
Enumerationr/w
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.171.11.113.12.1.2.11.8.1.12

swL2IGMPMulticastVlanGroupTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.9 · 1 row entry · 4 columns
Open in standard view 
The table containing the IGMP snooping multicast VLAN group information
swL2IGMPMulticastVlanGroupEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.9.1
Information about the current IGMP snooping multicast VLAN group.
Indexes
swL2IGMPMulticastVlanGroupVid swL2IGMPMulticastVlanGroupFromIp swL2IGMPMulticastVlanGroupToIp
Column Syntax OID
swL2IGMPMulticastVlanGroupVid
This object indicates the VID of the IGMP snooping multicast VLAN group.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.9.1.1
swL2IGMPMulticastVlanGroupFromIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.9.1.2
swL2IGMPMulticastVlanGroupToIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.9.1.3
swL2IGMPMulticastVlanGroupStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.11.9.1.4

swL2IGMPv3Table

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.10 · 1 row entry · 3 columns
Open in standard view 
This table contains the IGMP snooping V3 information.
swL2IGMPv3Entry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.10.1
Information about the current IGMP snooping V3.
Indexes
swL2IGMPVid swL2IGMPGroupIpAddr swL2IGMPv3SourceIPAddr
Column Syntax OID
swL2IGMPv3SourceIPAddr
This object identifies the source IP addresses from the group where they were captured from.
IGMP packets, on a per-VLAN basis.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.10.1.1
swL2IGMPv3Forwarding
This object identifies if the packets from the source IP addresses are forwarding or not.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.10.1.2
swL2IGMPv3ExpireTimer
This object identifies the leaving times of the source time.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.11.10.1.3

swIGMPSnoopingGroupTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.11 · 1 row entry · 10 columns
Open in standard view 
The table contains the current IGMP snooping group information captured by
the device.
swIGMPSnoopingGroupEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1
Information about the current IGMP snooping group information which has been captured by
the device.
Indexes
swIGMPSnoopingGroupVid swIGMPSnoopingGroupGroupAddr swIGMPSnoopingGroupSourceAddr
Column Syntax OID
swIGMPSnoopingGroupVid
This object indicates the VID of the individual IGMP snooping group table entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.1
swIGMPSnoopingGroupGroupAddr
This object identifies the group IP address which has been captured from
the IGMP packet, on a per-VLAN basis.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.2
swIGMPSnoopingGroupSourceAddr
This object identifies the source addresses.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.3
swIGMPSnoopingGroupIncludePortMap
This object indicates the port list under INCLUDE mode.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.4
swIGMPSnoopingGroupExcludePortMap
This object indicates the port list under EXCLUDE mode.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.5
swIGMPSnoopingGroupReportCount
This object indicates how many report packets were received by our
device corresponding with this entry that has the IGMP function enabled,
on a per-group basis.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.6
swIGMPSnoopingGroupUpTime
This object indicates how long since the group was detected.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.7
swIGMPSnoopingGroupExpiryTime
This object indicates the time left before this group will be aged out.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.8
swIGMPSnoopingGroupRouterPorts
This object indicates the port number of the router ports.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.9
swIGMPSnoopingGroupStaticMemberPorts
This object indicates the port number of the static member ports.
This object is only supported by IGMPv2.
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.11.1.10

swL2IGMPDynIPMultCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.12.3 · 1 row entry · 3 columns
Open in standard view 
This table is used to manage the IGMP dynamic IP multicast.
swL2IGMPDynIPMultCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.12.3.1
A list of manageable entities for IGMP dynamic IP multicast.
Indexes
swL2IGMPCtrlVid
Column Syntax OID
swL2IGMPDynIPMultVlanState
This object is used to disable or enable the dynamic IP multicast feature in this VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.12.3.1.1
swL2IGMPDynIPMultVlanAge
This object is used to enable or disable aging on the dynamic IP multicast entry in this VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.12.3.1.2
swL2IGMPDynIPMultGroupExpiryTime
This object indicates the dynamic IP multicast Group Expiry Time.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.12.3.1.3

swL2IGMPAccessAuthTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.13 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the IGMP Access Authentication
configurations of the device.
swL2IGMPAccessAuthEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.13.1
A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.
Indexes
swL2IGMPAccessAuthPort
Column Syntax OID
swL2IGMPAccessAuthPort
The index of the swL2IGMPAccessAuthTable.
This object corresponds to the port being configured.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.11.113.12.1.2.11.13.1.1
swL2IGMPAccessAuthState
This object denotes the status of IGMP Access Authentication of the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.11.13.1.2

swL2IGMPVlanCounterInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.14.2 · 1 row entry · 20 columns
Open in standard view 
This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device, based on VLAN.
swL2IGMPVlanCounterInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled.
Indexes
swL2IGMPVlanCounterInfoVid
Column Syntax OID
swL2IGMPVlanCounterInfoVid
This object indicates the VID of the associated IGMP info table
entry. It follows swL2IGMPCtrlVid in the associated entry of the
IGMP control table (swL2IGMPCtrlTable).
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.1
swL2IGMPVlanCounterGroupNumber
The group number on a per VLAN basis.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.2
swL2IGMPVlanQueryCountV1
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.3
swL2IGMPVlanQueryCountV2
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.4
swL2IGMPVlanQueryCountV3
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.5
swL2IGMPVlanDropQueryCount
This object indicates the number of query packets dropped
since the IGMP function was enabled, on a per-VLAN basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.6
swL2IGMPVlanReportCountV1
This object indicates the number of report packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.7
swL2IGMPVlanReportCountV2
This object indicates the number of report packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.8
swL2IGMPVlanReportCountV3
This object indicates the number of report packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.9
swL2IGMPVlanLeaveCountV2
This object indicates the number of leave packets received
since the IGMP function was enabled, on a per-VLAN basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.10
swL2IGMPVlanDropedReportAndLeaveCount
This object indicates the number of report and leave packets
dropped since the IGMP function was enabled, on a per-VLAN basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.11
swL2IGMPVlanDroppedByMaxGroupLimitation
This object indicates the number of packets received
dropped by max group limitation since the IGMP function was enabled,
on a per-VLAN basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.12
swL2IGMPVlanDroppedByGroupFilter
This object indicates the number of packets received
dropped by group filter since the IGMP function was enabled,
on a per-VLAN basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.13
swL2IGMPVlanTxQueryCountV1
This object indicates the send count of IGMP query messages, on a
per-VLAN basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.14
swL2IGMPVlanTxQueryCountV2
This object indicates the send count of IGMP query messages, on a
per-VLAN basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.15
swL2IGMPVlanTxQueryCountV3
This object indicates the send count of IGMP query messages, on a
per-VLAN basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.16
swL2IGMPVlanTxReportCountV1
This object indicates the send count of IGMP report messages, on a
per-VLAN basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.17
swL2IGMPVlanTxReportCountV2
This object indicates the send count of IGMP report messages, on a
per-VLAN basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.18
swL2IGMPVlanTxReportCountV3
This object indicates the send count of IGMP report messages, on a
per-VLAN basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.19
swL2IGMPVlanTxLeaveCountV2
This object indicates the send count of IGMP leave messages, on a
per-VLAN basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.2.1.20

swL2IGMPPortCounterInfoTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.14.3 · 1 row entry · 20 columns
Open in standard view 
This table contains the current number of IGMP query packets which
are captured by this device, as well as the IGMP query packets
sent by the device, based on port.
swL2IGMPPortCounterInfoEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1
Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN
entries are all enabled.
Indexes
swL2IGMPPortCounterInfoIndex
Column Syntax OID
swL2IGMPPortCounterInfoIndex
This object indicates the port number of the associated IGMP Counter
info table entry.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.1
swL2IGMPPortCounterGroupNumber
Group number per port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.2
swL2IGMPPortQueryCountV1
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.3
swL2IGMPPortQueryCountV2
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.4
swL2IGMPPortQueryCountV3
This object indicates the number of query packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.5
swL2IGMPPortDropQueryCount
This object indicates the number of query packets dropped
since the IGMP function was enabled, on a per-port basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.6
swL2IGMPPortReportCountV1
This object indicates the number of report packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.7
swL2IGMPPortReportCountV2
This object indicates the number of report packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.8
swL2IGMPPortReportCountV3
This object indicates the number of report packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.9
swL2IGMPPortLeaveCountV2
This object indicates the number of leave packets received
since the IGMP function was enabled, on a per-port basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.10
swL2IGMPPortDropedReportAndLeaveCount
This object indicates the number of report and leave packets
dropped since the IGMP function was enabled, on a per-port basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.11
swL2IGMPPortDroppedByMaxGroupLimitation
This object indicates the number of packets received
dropped by max group limitation since the IGMP function was enabled,
on a per-port basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.12
swL2IGMPPortDroppedByGroupFilter
This object indicates the number of packets received
dropped by group filter since the IGMP function was enabled,
on a per-port basis.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.13
swL2IGMPPortTxQueryCountV1
This object indicates the send count of IGMP query messages, on a
per-port basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.14
swL2IGMPPortTxQueryCountV2
This object indicates the send count of IGMP query messages, on a
per-port basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.15
swL2IGMPPortTxQueryCountV3
This object indicates the send count of IGMP query messages, on a
per-port basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.16
swL2IGMPPortTxReportCountV1
This object indicates the send count of IGMP report messages, on a
per-port basis, for IGMPv1.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.17
swL2IGMPPortTxReportCountV2
This object indicates the send count of IGMP report messages, on a
per-port basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.18
swL2IGMPPortTxReportCountV3
This object indicates the send count of IGMP report messages, on a
per-port basis, for IGMPv3.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.19
swL2IGMPPortTxLeaveCountV2
This object indicates the send count of IGMP leave messages, on a
per-port basis, for IGMPv2.
RFC1155-SMICounter
Textual Convention: RFC1155-SMICounter Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.11.113.12.1.2.11.14.3.1.20

swL2IGMPRouterIPAddressTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.15 · 1 row entry · 2 columns
Open in standard view 
This table indicates the router IP address of the associated IGMP
Router Port Table (swL2IGMPRouterPortTable).
swL2IGMPRouterIPAddressEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.15.1
Information about current router IP address in the IGMP
Router Port Table (swL2IGMPRouterPortTable).
Indexes
swL2IGMPRouterIPAddressVid swL2IGMPRouterIPAddress
Column Syntax OID
swL2IGMPRouterIPAddressVid
This object indicates the VID of the associated IGMP Router Port
Table (swL2IGMPRouterPortTable).
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.15.1.1
swL2IGMPRouterIPAddress
This object indicates the Router IP address of the associated IGMP
Router Port Table.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.15.1.2

swL2IGMPSnoopingStaticGroupTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.11.16 · 1 row entry · 4 columns
Open in standard view 
The table contains the current IGMP snooping static group information captured by
the device.
swL2IGMPSnoopingStaticGroupEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.11.16.1
Information about current IGMP snooping static group information captured by
the device.
Indexes
swL2IGMPSnoopingStaticGroupVID swL2IGMPSnoopingStaticGroupIPaddress
Column Syntax OID
swL2IGMPSnoopingStaticGroupVID
This object indicates the VID of the current IGMP snooping static group.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.11.113.12.1.2.11.16.1.1
swL2IGMPSnoopingStaticGroupIPaddress
This object indicates the current IGMP snooping static group IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.11.113.12.1.2.11.16.1.2
swL2IGMPSnoopingStaticGroupMemberPortList
This object indicates the current IGMP snooping static group Member Portlist.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.11.16.1.3
swL2IGMPSnoopingStaticGroupRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.11.113.12.1.2.11.16.1.4

swL2TrafficCtrlTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.13.1 · 1 row entry · 6 columns
Open in standard view 
This table specifies the storm traffic control configuration.
swL2TrafficCtrlEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1
A list of information specific to the storm traffic control
configuration.
Indexes
swL2TrafficCtrlGroupIndex
Column Syntax OID
swL2TrafficCtrlGroupIndex
The index of the logical port trunk. The trunk group number depends
on the existence of a unit and module.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1.1
swL2TrafficCtrlUnitIndex
Indicates the ID of the unit in the device
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1.2
swL2TrafficCtrlBMStromthreshold
This object decides how many thousand broadcast/multicast packets
per second (depending on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl
or swL2TrafficCtrlDlfStromCtrl objects being enabled) will activa…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1.3
swL2TrafficCtrlBcastStromCtrl
This object indicates if the broadcast storm control function is
enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1.4
swL2TrafficCtrlMcastStromCtrl
This object indicates if the multicast storm control function is
enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1.5
swL2TrafficCtrlDlfStromCtrl
This object indicates if the destination lookup fail function is
enabled or disabled.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.13.1.1.6

swL2TrafficSegTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.14.1 · 1 row entry · 2 columns
Open in standard view 
This table specifies that the port can just forward traffic to the 
specific port list.
swL2TrafficSegEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.14.1.1
A list of information which specifies the port with its traffic
forwarding list.
Indexes
swL2TrafficSegPort
Column Syntax OID
swL2TrafficSegPort
The port number of the logical port.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.14.1.1.1
swL2TrafficSegForwardPorts
The port list where a specific port can forward traffic.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.11.113.12.1.2.14.1.1.2

swL2StpPortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.15.4 · 1 row entry · 14 columns
Open in standard view 
A table that contains port-specific information
for the Spanning Tree Protocol.
swL2StpPortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1
A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.
Indexes
swL2StpPort
Column Syntax OID
swL2StpPort
The port number of the port for this entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.1
swL2StpPortLbd
Used to enable or disable the loopback function on the specified port.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.2
swL2StpPortStatus
When the port is enabled, this defines the port's current state as
defined by the Spanning Tree Protocol. If PortEnable is disabled,
the port status will be no-stp-enabled (7). If the port is in error
disabled status…
Enumeration
Enumerated Values:
1other
2disabled
3discarding
4learning
5forwarding
6broken
7no-stp-enabled
8err-disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.3
swL2StpPortRole
When the port is enabled, this defines the port's current port role
as defined by the Spanning Tree Protocol. If the PortEnable is disabled,
the port status will be nonstp. If the port is in error loopback status,
th…
Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6nonStp
7loopback
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.4
swL2StpPortFBPDU
The enable/disable status of the BPDU filtering mechanism as related to this port.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.5
swL2StpPortLinkState
This object indicates the STP port speed and duplex mode.
Enumeration
Enumerated Values:
1link-down
2half-10Mbps-none
3half-10Mbps-backp
4full-10Mbps-none
5full-10Mbps-8023x
6half-100Mbps-none
7half-100Mbps-backp
8full-100Mbps-none
9full-100Mbps-8023x
10half-1000Mbps-none
11full-1000Mbps-backp
12full-1000Mbps-none
13full-1000Mbps-8023x
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.6
swL2StpPortProtocolMigration
When operating in RSTP (version 2) mode, writing TRUE (1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always returns a FALSE message when read.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.7
swL2StpPortAdminEdgePort
The administrative value of the Edge Port parameter. A
value of TRUE (1) indicates that this port should be
assumed as an edge-port and a value of FALSE (2) indicates
that this port should be assumed as a non-edge-port.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.8
swL2StpPortOperEdgePort
The operational value of the Edge Port parameter. The
object is initialized to the value of
swL2StpPortAdminEdgePort and is set to FALSE on reception of
a BPDU packet.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.9
swL2StpPortAdminPointToPoint
The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue (0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of fo…
Enumerationr/w
Enumerated Values:
0forceTrue
1forceFalse
2auto
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.10
swL2StpPortOperPointToPoint
The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is determined by management or by auto-dete…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.11
swL2StpPortAdminPathCost
The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.

Writing a value of '0' assigns the automatically calculated
default Path Cos…
Unsigned32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.12
swL2StpPortPriority
The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value of
swL2StpPort.
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.13
swL2STPPortState
Used to describe the enable/disable state of the loopback
prevention function on a per-port basis.
Enumerationr/w
Enumerated Values:
1other
2disabled
3enabled
 .1.3.6.1.4.1.171.11.113.12.1.2.15.4.1.14

swL2MulticastFilterModeVlanTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.17.1 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the VLAN multicast filter mode.
swL2MulticastFilterModeVlanEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.17.1.1
A list of multicast filter mode information for each VLAN.
Indexes
swL2MulticastFilterVid
Column Syntax OID
swL2MulticastFilterVid
Indicates the VID for each VLAN.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.17.1.1.1
swL2MulticastFilterVlanMode
Specifies the multicast filter mode for each VLAN.
Enumerationr/w
Enumerated Values:
1forward-all-groups
2forward-unregistered-groups
3filter-unregistered-groups
 .1.3.6.1.4.1.171.11.113.12.1.2.17.1.1.2

swL2MulticastFilterModePortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.17.2 · 1 row entry · 2 columns
Open in standard view 
A table that contains information about the port multicast filter mode.
swL2MulticastFilterModePortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.17.2.1
A list of multicast filter mode information for each port.
Indexes
swL2MulticastFilterPortIndex
Column Syntax OID
swL2MulticastFilterPortIndex
Specifies the port number.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.17.2.1.1
swL2MulticastFilterPortMode
Specifies multicast filter mode for each port.
Enumerationr/w
Enumerated Values:
1forward-all-groups
2forward-unregistered-groups
3filter-unregistered-groups
 .1.3.6.1.4.1.171.11.113.12.1.2.17.2.1.2

swL2LoopDetectPortTable

table
.1.3.6.1.4.1.171.11.113.12.1.2.18.2.1 · 1 row entry · 4 columns
Open in standard view 
The table specifies the loopback detection function specified by port.
swL2LoopDetectPortEntry entry .1.3.6.1.4.1.171.11.113.12.1.2.18.2.1.1
The table specifies the loopback detection function specified by port.
Indexes
swL2LoopDetectPortIndex
Column Syntax OID
swL2LoopDetectPortIndex
This object indicates the module's port number. The range is from 1 to
the maximum port number specified in the module
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.11.113.12.1.2.18.2.1.1.1
swL2LoopDetectPortState
This object indicates the loopback detection function state on the port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.11.113.12.1.2.18.2.1.1.2
swL2LoopDetectPortLoopVLAN
This object indicates the VLAN list that has detected a loopback.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.11.113.12.1.2.18.2.1.1.3
swL2LoopDetectPortLoopStatus
This object indicates the port status.
Enumeration
Enumerated Values:
1normal
2loop
3error
4none
 .1.3.6.1.4.1.171.11.113.12.1.2.18.2.1.1.4