swL2MACNotifyState
DES3200-26DC-L2MGMT-MIB ·
.1.3.6.1.4.1.171.11.113.12.1.2.1.2.8
Object
scalar
r/w
Enumeration
This object can enable or disable MAC Notification.
Context
- MIB
- DES3200-26DC-L2MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.113.12.1.2.1.2.8- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- swL2DevCtrl
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2DevCtrlStpState This object can enable or disable the spanning tree algorithm during
the runtime of the system. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.1 |
| swL2MACNotifyInterval This object indicates the time interval, in seconds, that will trigger
MAC notification messages. | scalar | Integer32 | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.10 |
| swL2DevCtrlAsymVlanState This object enables or disables asymmetric VLANs
during the runtime of the system. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.13 |
| swL2DevCtrlTelnet | node | - | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.14 |
| swL2DevCtrlManagementVlanId This object controls which previously created VLANs are included
in the System IP Interface. | scalar | VlanId | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.16 |
| swL2DevCtrlWeb | node | - | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.17 |
| swL2DevCtrlLLDPState Specifies the state of the LLDP function.
When this function is enabled, the switch can start to transmit
LLDP packets and receive and process the LLDP packets.
The specific fu… | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.18 |
| swL2DevCtrlLLDPForwardMessageState When lldp is disabled and lldp forward_message's are enabled, the
LLDP Data Unit packets received by the switch will be forwarded. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.19 |
| swL2DevCtrlIGMPSnooping This object indicates if the layer 2 Internet Group Management
Protocol (IGMP) capture function is enabled or disabled. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.2 |
| swL2DevCtrlIpAutoconfig This object controls the IP auto configuration state. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.20 |
| swL2DevCtrlCFM | node | - | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.21 |
| swL2DevCtrlVLANTrunkState This indicates the global state of the VLAN trunking feature of the device. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.22 |
| swL2DevCtrlIGMPSnoopingMcstRTOnly This object controls the IGMP snooping forward multicast routing only state. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.3 |
| swL2DevCtrlRmonState This object can enable or disable RMON. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.4 |
| swL2DevCtrlSnmpTrapState This object controls the SNMP trap status. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.5 |
| swL2DevCtrlCleanAllStatisticCounter When the object is set to active, all statistical counters will
be cleared. If set to normal, no action will occur. | scalar | Enumeration | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.6 |
| swL2DevCtrlVlanIdOfFDBTbl Indicates the VLAN ID to which the Dot1dTpFdbTable belongs;
The default value is the DEFAULT_VLAN_ID of the system. | scalar | VlanId | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.7 |
| swL2MACNotifyHistorySize This object indicates the history size of MAC addresses in the MAC Address table.
The default value is 1. | scalar | Integer32 | .1.3.6.1.4.1.171.11.113.12.1.2.1.2.9 |