swL2STPPortState
DES3018-L2MGMT-MIB ·
.1.3.6.1.4.1.171.11.63.2.2.16.4.1.14
Object
column
r/w
Enumeration
The enabled/disabled status is usedoop-back prevention attached to this port.
Context
- MIB
- DES3018-L2MGMT-MIB
- OID
.1.3.6.1.4.1.171.11.63.2.2.16.4.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swL2StpPortEntry
- Table
- swL2StpPortTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | disabled |
3 | enabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swL2StpPort The port number of the port for this entry. | column | Integer32 | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.1 |
| swL2StpPortAdminPointToPoint The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected… | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.10 |
| swL2StpPortOperPointToPoint The operational point-to-point status of the LAN segment
attached to this port. It indicates whether a port is
considered to have a point-to-point connection or not.
The value is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.11 |
| swL2StpPortAdminPathCost The administratively assigned value for the contribution
of this port to the path cost of paths towards the spanning
tree root.
Writing a value of '0' assigns the a… | column | Unsigned32 | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.12 |
| swL2StpPortPriority The value of the priority field which is
contained in the first (in network byte order)
octet of the (2 octet long) Port ID. The other
octet of the Port ID is given by the value … | column | Integer32 | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.13 |
| swL2StpPortRestrictedRole If TRUE causes the port not to be selected as Root Port,
even it has the best spanning tree priotiry vector. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.15 |
| swL2StpPortRestrictedTCN If TRUE causes the port not to propagate received topology
change notifications and topology changes to other Ports. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.16 |
| swL2StpPortLbd obsolete The enabled/disabled status is used to Loop-back prevention attached
to this port. | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.2 |
| swL2StpPortStatus When the port Enable state is enabled, the port's current
state as defined by application of the Spanning Tree Protocol.
If the PortEnable is disabled, the the port status will b… | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.3 |
| swL2StpPortRole When the port Enable state is enabled, the port's current
port role as defined by application of the Spanning Tree Protocol.
If the Port Enable state is disabled, the the port ro… | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.4 |
| swL2StpPortFBPDU The enabled/disabled status is used to BPDU Filtering attached
to this port. | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.5 |
| swL2StpPortLinkState This object indicates the stp port speed and duplex mode. | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.6 |
| swL2StpPortProtocolMigration When operating in RSTP (version 2) mode, writing TRUE(1)
to this object forces this port to transmit RSTP BPDUs.
Any other operation on this object has no effect and
it always ret… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.7 |
| swL2StpPortAdminEdgePort The administrative value of the Edge Port parameter. A
value of TRUE(0) indicates that this port should be
assumed as an edge-port and a value of FALSE(1) indicates
that this por… | column | Enumeration | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.8 |
| swL2StpPortOperEdgePort The operational value of the Edge Port parameter. The
object is initialized to the value of
swL2StpPortAdminEdgePort and is set FALSE on reception of
a BPDU. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.171.11.63.2.2.16.4.1.9 |