DES3018-L2MGMT-MIB Table View

A table that contains information about every port.

swL2PortInfoEntry row .1.3.6.1.4.1.171.11.63.2.2.2.1.1

A list of information for each port of the device.

Indexes

swL2PortInfoPortIndex

Column	Syntax	OID
swL2PortInfoPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.2.2.2.1.1.1
swL2PortInfoLinkStatus This object indicates the port link status.	Enumeration Enumerated Values: 1 other 2 link-pass 3 link-fail	.1.3.6.1.4.1.171.11.63.2.2.2.1.1.4
swL2PortInfoNwayStatus This object indicates the port speed and duplex mode.	Enumeration Enumerated Values: 1 auto 2 full-10Mbps-8023x 3 full-10Mbps-none 4 half-10Mbps-backp 5 half-10Mbps-none 6 full-100Mbps-8023x 7 full-100Mbps-none 8 half-100Mbps-backp 9 half-100Mbps-none 10 full-1Gigabps-8023x 11 full-1Gigabps-none 12 half-1Gigabps-backp 13 half-1Gigabps-none	.1.3.6.1.4.1.171.11.63.2.2.2.1.1.5

A table that contains control information about every port.

swL2PortCtrlEntry row .1.3.6.1.4.1.171.11.63.2.2.2.2.1

A list of control information for each port of the device.

Indexes

swL2PortCtrlPortIndex

Column	Syntax	OID
swL2PortCtrlPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.1
swL2PortCtrlAdminState This object decide the port enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.2
swL2PortCtrlNwayState Chose the port speed, duplex mode, and N-Way function mode.	Enumerationr/w Enumerated Values: 1 nway-auto 2 nway-disabled-10Mbps-Half 3 nway-disabled-10Mbps-Full 4 nway-disabled-100Mbps-Half 5 nway-disabled-100Mbps-Full 7 nway-disabled-1Gigabps-Full	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.3
swL2PortCtrlFlowCtrlState Set flow control function as enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.4
swL2PortCtrlDescription The object describe the ports in text.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.5
swL2PortCtrlMACNotifyState This object set each poet MAC notification state.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.7
swL2PortCtrlMDIXState This object controls the MDIX state of a specified port.	Enumerationr/w Enumerated Values: 1 auto 2 normal 3 cross	.1.3.6.1.4.1.171.11.63.2.2.2.2.1.10

A table that contains information about Err port.

swL2PortErrEntry row .1.3.6.1.4.1.171.11.63.2.2.2.3.1

A list of information for err port of the device.

Indexes

swL2PortErrPortIndex

Column	Syntax	OID
swL2PortErrPortIndex This object indicates the module's port number.(1..Max port number in the module)	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.2.2.2.3.1.1
swL2PortErrPortState This object decide the portstate enabled or disabled.	Enumeration Enumerated Values: 1 disabled 2 enabled	.1.3.6.1.4.1.171.11.63.2.2.2.3.1.2
swL2PortErrPortStatus This object decide the PortStatus whether err-disabled.	Enumeration Enumerated Values: 1 other 2 err-disabled	.1.3.6.1.4.1.171.11.63.2.2.2.3.1.3
swL2PortErrPortReason This object decide the PortStatus STP LBD or Storm control.	Enumeration Enumerated Values: 1 stp-lbd 2 storm-control	.1.3.6.1.4.1.171.11.63.2.2.2.3.1.4
swL2PortErrDescription The object describe the ports in text.	OctetString Constraints: range: 0-128	.1.3.6.1.4.1.171.11.63.2.2.2.3.1.5

.

swL2QOSBandwidthControlEntry row .1.3.6.1.4.1.171.11.63.2.2.3.1.1

A list of information contained in swL2QOSBandwidthControlTable.

Indexes

swL2QOSBandwidthPortIndex

Column	Syntax	OID
swL2QOSBandwidthPortIndex Indicates the port .	Integer32 Constraints: range: 1-650	.1.3.6.1.4.1.171.11.63.2.2.3.1.1.1
swL2QOSBandwidthRxRate Indicates RX Rate(Kbit/sec) of the specifed port.Value 1024000 means no limit.	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.171.11.63.2.2.3.1.1.2
swL2QOSBandwidthTxRate Indicates TX Rate(Kbit/sec) of the specifed port.Value 1024000 means no limit.	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.171.11.63.2.2.3.1.1.3
swL2QOSBandwidthRadiusRxRate The RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.2.2.3.1.1.4
swL2QOSBandwidthRadiusTxRate The TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.2.2.3.1.1.5

.

swL2QOSSchedulingEntry row .1.3.6.1.4.1.171.11.63.2.2.3.2.1

A list of information contained in swL2QOSSchedulingTable.

Indexes

swL2QOSSchedulingClassIndex

Column	Syntax	OID
swL2QOSSchedulingClassIndex Indicates the hardware queue number.	Integer32 Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.2.2.3.2.1.1
swL2QOSSchedulingMaxWeight	Integer32r/w Constraints: range: 1-55	.1.3.6.1.4.1.171.11.63.2.2.3.2.1.4

.

swL2QOS8021pUserPriorityEntry row .1.3.6.1.4.1.171.11.63.2.2.3.3.1

A list of information contained in swL2QOS8021pUserPriorityTable.

Indexes

swL2QOS8021pUserPriorityIndex

Column	Syntax	OID
swL2QOS8021pUserPriorityIndex The 802.1p user priority .	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.171.11.63.2.2.3.3.1.1
swL2QOS8021pUserPriorityClass The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority).	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.2.2.3.3.1.2

.

swL2QOS8021pDefaultPriorityEntry row .1.3.6.1.4.1.171.11.63.2.2.3.4.1

A list of information contained in swL2QOS8021pDefaultPriorityTable.

Indexes

swL2QOS8021pDefaultPriorityIndex

Column	Syntax	OID
swL2QOS8021pDefaultPriorityIndex Indicates the port number .	Integer32 Constraints: range: 1-650	.1.3.6.1.4.1.171.11.63.2.2.3.4.1.1
swL2QOS8021pDefaultPriority The priority value to assign to untagged packets received by the switch ports on the switch..	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.171.11.63.2.2.3.4.1.2
swL2QOS8021pRadiusPriority The value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.2.2.3.4.1.3

This table specifies the port membership for each logical link.

swPortTrunkEntry row .1.3.6.1.4.1.171.11.63.2.2.4.3.1

A list of information specifies which ports group form
a single logical link.

Indexes

swPortTrunkIndex

Column	Syntax	OID
swPortTrunkIndex The index of logical port trunk.	Integer32 Constraints: range: 1-3	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.1
swPortTrunkMasterPort The object indicates the master port number of the port trunk entry.The first port of the trunk is implicitly configured to be the master logical port.When using Port Trunk, you can not configure the other ports of t…	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.2
swPortTrunkPortList Indicate member ports of a logical trunk.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.3
swPortTrunkType This object indicates the type of this entry.	Enumerationr/w Enumerated Values: 1 static 2 lacp	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.4
swPortTrunkActivePort This object indicates the active ports of this entry.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.5
swPortTrunkState This object indicates the status of this entry. when the state is CreatAndGo(4),the type of trunk is static(1); when the state is CreatAndWait(5),the type of trunk is lacp(2).	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.6
swPortTrunkFloodingPort The flooding port of every trunk.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.171.11.63.2.2.4.3.1.7

This table specifys which ports group a set of ports(up to 8)
into a single logical link.

swL2TrunkLACPPortEntry row .1.3.6.1.4.1.171.11.63.2.2.4.5.1

A list of information specifies which ports group a set of
ports(up to 8) into a single logical link.

Indexes

swL2TrunkLACPPortIndex

Column	Syntax	OID
swL2TrunkLACPPortIndex The index of logical port lacp.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.4.5.1.1
swL2TrunkLACPPortState The state of logical port lacp.	Enumerationr/w Enumerated Values: 1 active 2 passive	.1.3.6.1.4.1.171.11.63.2.2.4.5.1.2

This table is used to manage the VLAN trunking feature of the device.

swL2TrunkVLANEntry row .1.3.6.1.4.1.171.11.63.2.2.4.6.1

This object is used to configure the VLAN trunking settings for each port.

Indexes

swL2TrunkVLANPort

Column	Syntax	OID
swL2TrunkVLANPort This object indicates the port being configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.4.6.1.1
swL2TrunkVLANState The state of the logical port LACP.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.2.2.4.6.1.2

The table controls the Vlan's IGMP function. Its scale depends
on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled
mode, there is only one entry in the table, with index 1. If 
VLAN is in Port-Base or 802.1q mode, the number of entries can 
be up to 12, with index range from 1 to 12.

swL2IGMPCtrlEntry row .1.3.6.1.4.1.171.11.63.2.2.7.3.1

The entry in IGMP control table (swL2IGMPCtrlTable). The entry
is effective only when IGMP capture switch
(swL2DevCtrlIGMPSnooping) is enabled.

Indexes

swL2IGMPCtrlVid

Column	Syntax	OID
swL2IGMPCtrlVid This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If …	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.1
swL2IGMPQueryInterval The frequency at which IGMP Host-Query packets are transmitted on this switch.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.2
swL2IGMPMaxResponseTime The maximum query response time on this switch.	Integer32r/w Constraints: range: 1-25	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.3
swL2IGMPRobustness The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.	Integer32r/w Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.4
swL2IGMPLastMemberQueryInterval The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.5
swL2IGMPHostTimeout The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please refere…	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.6
swL2IGMPRouteTimeout The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.7
swL2IGMPLeaveTimer When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.	Integer32r/w Constraints: range: 1-16711450	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.8
swL2IGMPQueryState This object decide the IGMP query enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.9
swL2IGMPCurrentState This object indicates the current IGMP query state.	Enumeration Enumerated Values: 1 other 2 querier 3 non-querier	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.10
swL2IGMPCtrlState This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(…	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.11
swL2IGMPFastLeave	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.2.2.7.3.1.12

The table contains the number current IGMP query packets which
is captured by this device, as well as the IGMP query packets
sent by the device.

swL2IGMPQueryInfoEntry row .1.3.6.1.4.1.171.11.63.2.2.7.4.1

Information about current IGMP query information, provided that
swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN
entry are all enabled.

Indexes

swL2IGMPInfoVid

Column	Syntax	OID
swL2IGMPInfoVid This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable).	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.4.1.1
swL2IGMPInfoQueryCount This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.4.1.2
swL2IGMPInfoTxQueryCount This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.4.1.3

The table containing current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled. Note
that the priority of IGMP table entries is lower than Filtering
Table, i.e. if there is a table hash collision between the 
entries of IGMP Table and Filtering Table inside the switch H/W
address table, then Filtering Table entry overwrite the 
colliding entry of IGMP Table. See swL2FilterMgmt description 
also.

swL2IGMPInfoEntry row .1.3.6.1.4.1.171.11.63.2.2.7.5.1

Information about current IGMP information which captured by
this device, provided that swL2DevCtrlIGMPSnooping and
swL2IGMPCtrlState of associated VLAN entry are all enabled.

Indexes

swL2IGMPVid swL2IGMPGroupIpAddr

Column	Syntax	OID
swL2IGMPVid This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.5.1.1
swL2IGMPGroupIpAddr This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.171.11.63.2.2.7.5.1.2
swL2IGMPMacAddr This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.63.2.2.7.5.1.3
swL2IGMPPortMap This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered p…	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.7.5.1.4
swL2IGMPIpGroupReportCount This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.5.1.5

The information of the router port table.

swL2IGMPRouterPortEntry row .1.3.6.1.4.1.171.11.63.2.2.7.6.1

The entry of swL2IGMPRouterPortTable.

Indexes

swL2IGMPRouterPortVlanid

Column	Syntax	OID
swL2IGMPRouterPortVlanid This object indicates the vlan id of the router port entry.	Integer32 Constraints: range: 1-4094	.1.3.6.1.4.1.171.11.63.2.2.7.6.1.1
swL2IGMPRouterPortVlanName This object indicates the vlan name of the router port entry.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.2.2.7.6.1.2
swL2IGMPRouterPortStaticPortList This object indicate the static portlist of the router port entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.7.6.1.3
swL2IGMPRouterPortDynamicPortList This object indicate the dynamic portlist of the router port entry.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.7.6.1.4
swL2IGMPRouterPortForbiddenPortList This object indicate the forbidden portlist of the router port entry.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.7.6.1.5

This table is used to manage the IGMP Access Authentication
configurations of the device.

swL2IGMPAccessAuthEntry row .1.3.6.1.4.1.171.11.63.2.2.7.7.1

A list of manageable entities for IGMP Access Authentication.
The configuration is done per port.

Indexes

swL2IGMPAccessAuthPort

Column	Syntax	OID
swL2IGMPAccessAuthPort The index of the swL2IGMPAccessAuthTable. This object corresponds to the port being configured.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.7.7.1.1
swL2IGMPAccessAuthState This object denotes the status of IGMP Access Authentication of the port.	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.2.2.7.7.1.2

This table specifys the storm traffic control configuration.

swL2TrafficCtrlEntry row .1.3.6.1.4.1.171.11.63.2.2.11.1.1

A list of information specifies the storm traffic control
configuration.

Indexes

swL2TrafficCtrlGroupIndex

Column	Syntax	OID
swL2TrafficCtrlGroupIndex The index of logical port trunk. The trunk group number depend on the existence of unit and module.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.11.1.1.1
swL2TrafficCtrlUnitIndex Indicates ID of the unit in the device	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.11.1.1.2
swL2TrafficCtrlBMStromthreshold This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlUcastStromCtrl objects whether is enabled) will ac…	Integer32r/w Constraints: range: 64-1024000	.1.3.6.1.4.1.171.11.63.2.2.11.1.1.3
swL2TrafficCtrlBcastStromCtrl This object indicates broadcast storm control function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.11.1.1.4
swL2TrafficCtrlMcastStromCtrl This object indicates multicast storm control function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.11.1.1.5
swL2TrafficCtrlUcastStromCtrl This object indicates destination lookup fail function is enabled or disabled.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.11.1.1.6

This table specifys the port just can forward traffic to the 
specific port list.

swL2TrafficSegEntry row .1.3.6.1.4.1.171.11.63.2.2.12.1.1

A list of information specifies the port with its traffic
forward list.

Indexes

swL2TrafficSegPort

Column	Syntax	OID
swL2TrafficSegPort The port number of the logical port.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.171.11.63.2.2.12.1.1.1
swL2TrafficSegForwardPorts The port list that the specific port can forward traffic.	PortListr/w Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.12.1.1.2

port security feature which controls the address leaning capability and the
traffic forwarding decision. Each port can have this function enabled or disabled.
When it is enabled and a number is given said N, which allows N addresses to be
learned at this port, the first N learned addresses are locked at this port as
static entry. When the learned addresses number reach N, any coming packet with
not learned source addresses are discarded (e.g. dropped) and no more new addresses
can be learned at this port.

swL2PortSecurityControlEntry row .1.3.6.1.4.1.171.11.63.2.2.15.1.1

A list of information contained in swL2PortSecurityControlTable.

Indexes

swL2PortSecurityPortIndex

Column	Syntax	OID
swL2PortSecurityPortIndex Indicates the secured port to lock address learning.	Integer32 Constraints: range: 1-255	.1.3.6.1.4.1.171.11.63.2.2.15.1.1.1
swL2PortSecurityMaxLernAddr Indicates allowable number of addresses to be learned at this port.	Integer32r/w Constraints: range: 0-10	.1.3.6.1.4.1.171.11.63.2.2.15.1.1.2
swL2PortSecurityMode Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned …	Enumerationr/w Enumerated Values: 1 other 2 permanent 3 deleteOnTimeout 4 deleteOnReset	.1.3.6.1.4.1.171.11.63.2.2.15.1.1.3
swL2PortSecurityAdmState Indicates administration state of locking address.	Enumerationr/w Enumerated Values: 1 other 2 enable 3 disable	.1.3.6.1.4.1.171.11.63.2.2.15.1.1.4

A table that contains port-specific information
for the Spanning Tree Protocol.

swL2StpPortEntry row .1.3.6.1.4.1.171.11.63.2.2.16.4.1

A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.

Indexes

swL2StpPort

Column	Syntax	OID
swL2StpPort The port number of the port for this entry.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.1
swL2StpPortLbdobsolete The enabled/disabled status is used to Loop-back prevention attached to this port.	Enumeration Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.2
swL2StpPortStatus When the port Enable state is enabled, the port's current state as defined by application of the Spanning Tree Protocol. If the PortEnable is disabled, the the port status will be no-stp-enabled(7). If the port is in …	Enumeration Enumerated Values: 1 other 2 disabled 3 discarding 4 learning 5 forwarding 6 broken 7 no-stp-enabled 8 err-disabled	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.3
swL2StpPortRole When the port Enable state is enabled, the port's current port role as defined by application of the Spanning Tree Protocol. If the Port Enable state is disabled, the the port role will be nonstp(7). If the port is in…	Enumeration Enumerated Values: 1 disabled 2 alternate 3 backup 4 root 5 designated 6 nonStp 7 loopback	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.4
swL2StpPortFBPDU The enabled/disabled status is used to BPDU Filtering attached to this port.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.5
swL2StpPortLinkState This object indicates the stp port speed and duplex mode.	Enumeration Enumerated Values: 1 link-down 2 half-10Mbps-none 3 half-10Mbps-backp 4 full-10Mbps-none 5 full-10Mbps-8023x 6 half-100Mbps-none 7 half-100Mbps-backp 8 full-100Mbps-none 9 full-100Mbps-8023x 10 half-1000Mbps-none 11 full-1000Mbps-backp 12 full-1000Mbps-none 13 full-1000Mbps-8023x	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.6
swL2StpPortProtocolMigration When operating in RSTP (version 2) mode, writing TRUE(1) to this object forces this port to transmit RSTP BPDUs. Any other operation on this object has no effect and it always returns FALSE(2) when read.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.7
swL2StpPortAdminEdgePort The administrative value of the Edge Port parameter. A value of TRUE(0) indicates that this port should be assumed as an edge-port and a value of FALSE(1) indicates that this port should be assumed as a non-edge-port.	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.8
swL2StpPortOperEdgePort The operational value of the Edge Port parameter. The object is initialized to the value of swL2StpPortAdminEdgePort and is set FALSE on reception of a BPDU.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.9
swL2StpPortAdminPointToPoint The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of f…	Enumerationr/w Enumerated Values: 0 forceTrue 1 forceFalse 2 auto	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.10
swL2StpPortOperPointToPoint The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-det…	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.11
swL2StpPortAdminPathCost The administratively assigned value for the contribution of this port to the path cost of paths towards the spanning tree root. Writing a value of '0' assigns the automatically calculated default Path Cos…	Unsigned32r/w Constraints: range: 0-200000000	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.12
swL2StpPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of swL2StpPort.	Integer32r/w Constraints: range: 0-240	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.13
swL2STPPortState The enabled/disabled status is usedoop-back prevention attached to this port.	Enumerationr/w Enumerated Values: 1 other 2 disabled 3 enabled	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.14
swL2StpPortRestrictedRole If TRUE causes the port not to be selected as Root Port, even it has the best spanning tree priotiry vector.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.15
swL2StpPortRestrictedTCN If TRUE causes the port not to propagate received topology change notifications and topology changes to other Ports.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.171.11.63.2.2.16.4.1.16

Used to show and config per port priority-based QoS features on the switch

swL2CosPriorityEntry row .1.3.6.1.4.1.171.11.63.2.2.17.3.1.1

A list of information contained in swL2CosPriorityTable.

Indexes

swL2CosPriorityPort

Column	Syntax	OID
swL2CosPriorityPort The port number of CoS Priority.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.2.2.17.3.1.1.1
swL2CosPriorityPortPRI Indicates port_priority state for CoS.	Enumerationr/w Enumerated Values: 1 other 2 disable 3 enable	.1.3.6.1.4.1.171.11.63.2.2.17.3.1.1.2
swL2CosPriorityEtherPRI Enable Ethernet frame based priority. When set ether8021p(2), enable 802.1p QoS; When set macBase(3), enable MAC-based QoS; When set disable(1), disable Ethernet frame based priority.	Enumerationr/w Enumerated Values: 1 disable 2 ether8021p 3 macBase	.1.3.6.1.4.1.171.11.63.2.2.17.3.1.1.3
swL2CosPriorityIpPRI Enable IP priority QoS. When set tos(2), enable TOS based QoS; When set dscp(3), enable DSCP based QoS; When set disable(1), disable IP priority QoS.	Enumerationr/w Enumerated Values: 1 disable 2 tos 3 dscp	.1.3.6.1.4.1.171.11.63.2.2.17.3.1.1.4
swL2CosPriorityNone when read,it always return invalid(2); when write valid(1),it disables all priority in this table.	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.171.11.63.2.2.17.3.1.1.5

Used to show port-to-class mappings and
map specific port to one of the hardware queues available on the switch.

swL2CosPortPRIEntry row .1.3.6.1.4.1.171.11.63.2.2.17.3.2.1

A list of information contained in swL2CosPortPRITable.

Indexes

swL2CosPortPRIIndex

Column	Syntax	OID
swL2CosPortPRIIndex Indicates CoS Priority PortPRI.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.2.2.17.3.2.1.1
swL2CosPortPRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.2.2.17.3.2.1.2

Used to show MAC priority map to traffic class and 
map the destination MAC address in incoming packet to one of the hardware queues available on the switch.

swL2CosMacBasePRIEntry row .1.3.6.1.4.1.171.11.63.2.2.17.3.3.1

A list of information contained in swL2CosMacBasePRITable.

Indexes

swL2CosMacBasePRIIndex

Column	Syntax	OID
swL2CosMacBasePRIIndex Indicates CoS Priority MacBasePRI.	MacAddress Type Constraints: range: 6	.1.3.6.1.4.1.171.11.63.2.2.17.3.3.1.1
swL2CosMacBasePRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.2.2.17.3.3.1.2

Used to show TOS value to traffic class mapping and
map the TOS value in the IP header of incoming packet to one of the four hardware queues available on the switch.

swL2CosTosPRIEntry row .1.3.6.1.4.1.171.11.63.2.2.17.3.4.1

A list of information contained in swL2CosTosPRITable.

Indexes

swL2CosTosPRIIndex

Column	Syntax	OID
swL2CosTosPRIIndex Indicates CoS Priority TosPRI.	Integer32 Constraints: range: 0-7	.1.3.6.1.4.1.171.11.63.2.2.17.3.4.1.1
swL2CosTosPRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.2.2.17.3.4.1.2

Used to show DSCP value to traffic class mapping and
map the DSCP value in the IP header of incoming packet to one of the hardware queues available on the switch.

swL2CosDscpPRIEntry row .1.3.6.1.4.1.171.11.63.2.2.17.3.5.1

A list of information contained in swL2CosDscpPRITable.

Indexes

swL2CosDscpPRIIndex

Column	Syntax	OID
swL2CosDscpPRIIndex Indicates CoS Priority DscpPRI.	Integer32 Constraints: range: 0-63	.1.3.6.1.4.1.171.11.63.2.2.17.3.5.1.1
swL2CosDscpPRIClass The number of the switch's hardware priority queue. The switch has 4 hardware priority queues available. They are numbered between 0 (the lowest priority queue) and 3 (the highest priority queue). If you want to set, Y…	Integer32r/w Constraints: range: 0-3	.1.3.6.1.4.1.171.11.63.2.2.17.3.5.1.2

The table specifies the loopback detection function specified by port.

swL2LoopDetectPortEntry row .1.3.6.1.4.1.171.11.63.2.2.18.2.1.1

The table specifies the loopback detection function specified by port.

Indexes

swL2LoopDetectPortIndex

Column	Syntax	OID
swL2LoopDetectPortIndex This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.171.11.63.2.2.18.2.1.1.1
swL2LoopDetectPortState This object indicates the loopback detection function state on the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.171.11.63.2.2.18.2.1.1.2
swL2LoopDetectPortLoopStatus This object indicates the port status.	Enumeration Enumerated Values: 1 normal 2 loop 3 error	.1.3.6.1.4.1.171.11.63.2.2.18.2.1.1.4

A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.

swL2VlanEntry row .1.3.6.1.4.1.171.11.63.2.2.19.1.1

Static information for a VLAN configured into the
device by (local or network) management.

Indexes

swL2VlanIndex

Column	Syntax	OID
swL2VlanIndex The VLAN ID of the VLAN to be created. The range is 1 - 4094.	VlanId Type Constraints: range: 1..4094	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.1
swL2VlanName The name of the VLAN to be displayed.	OctetString Constraints: range: 0-32	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.2
swL2VlanType The type of the VLAN to be displayed.	Enumeration Enumerated Values: 0 dynamic 1 static	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.3
swL2VlanMemberPorts A range of member ports to the VLAN.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.4
swL2VlanStaticPorts A range of static ports to the VLAN.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.5
swL2VlanUntaggedPorts Specifies the additional ports as untagged.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.6
swL2VlanTaggedPorts Specifies the additional ports as tagged.	PortList Type Constraints: range: 0..127	.1.3.6.1.4.1.171.11.63.2.2.19.1.1.7