stpRootPort
DES-1210-28ME-B2 ·
.1.3.6.1.4.1.171.10.75.15.2.6.1.13
Object
scalar
SNMPv2-SMIInteger32
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
Context
- MIB
- DES-1210-28ME-B2
- OID
.1.3.6.1.4.1.171.10.75.15.2.6.1.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- stpBridgeGlobal
- Siblings
- 17
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| stpModuleStatus The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled… | scalar | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.6.1.1 |
| stpRootCost The Cost of the path to the CIST Root as seen
from this bridge. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.10 |
| stpMaxAge The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value th… | scalar | Timeout | .1.3.6.1.4.1.171.10.75.15.2.6.1.11 |
| stpForwardDelay This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines h… | scalar | Timeout | .1.3.6.1.4.1.171.10.75.15.2.6.1.12 |
| stpTopologyChangeTrapStatus This object is for enabling or disabling topology change event
trap in the system. | scalar | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.6.1.14 |
| stpNewRootTrapStatus This object is for enabling or disabling new root event
trap in the system. | scalar | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.6.1.15 |
| stpNewRootTraps | node | - | .1.3.6.1.4.1.171.10.75.15.2.6.1.16 |
| stpBridgeMaxHop The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error … | scalar | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.17 |
| stpNniBpduAddr The value dot1d(1) indicates that Tx BPDU Header should be
01-80-c2-00-00-00 on nni ports when qinq enabled. The value dot1ad(2) indicates that
Tx BPDU Header should be 01-80… | scalar | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.6.1.18 |
| stpProtocolVersion The version of Spanning Tree Protocol the bridge is
currently running. The value 'stpCompatible(0)'
indicates the Spanning Tree Protocol specified in
IEEE 802.1D and 'rstp(2)' in… | scalar | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.6.1.2 |
| stpBridgePriority The Value of the writable portion of the Bridge
Identifier comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096. | scalar | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.3 |
| stpTxHoldCount The value used by the Port Transmit state machine to limit
the maximum transmission rate. | scalar | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.4 |
| stpBridgeMaxAge The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity
of this timer is specified to be 1 second.
An agent may return a badValue error … | scalar | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.5 |
| stpBridgeHelloTime The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second. | scalar | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.6 |
| stpBridgeForwardDelay The value that all bridges use for ForwardDelay
when this bridge is acting as the root. Note that
802.1D specifies that the range for this
parameter is related to the value of
Br… | scalar | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.6.1.7 |
| stpFowardBPDU This object is for enabling or disabling forward BPDU. | scalar | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.6.1.8 |
| stpRootBridge The bridge identifier of the Root of the common spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the CIST Root Identifier… | scalar | BridgeId | .1.3.6.1.4.1.171.10.75.15.2.6.1.9 |