DES-1210-28ME-B2 Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
157
Rows
157
Columns
1,036

sysPortCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.1.13 · 1 row entry · 10 columns
Open in standard view 
A table to control the port specific parameters of the device like speed,
duplex mode, etc.
sysPortCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.1.13.1
An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.
Indexes
sysPortCtrlIndex sysPortCtrlMediumType
Column Syntax OID
sysPortCtrlIndex
Interface index of the port for the configuration
in this entry applies.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.1
sysPortCtrlMediumType
This object indicates the port type: fiber 1G/100M or copper.
Enumeration
Enumerated Values:
100copper
101fiber
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.2
sysPortCtrlSpeed
Configures interface speed.
Enumerationr/w
Enumerated Values:
1rate1000M-Full
2rate100M-Full
3rate100M-Half
4rate10M-Full
5rate10M-Half
6auto
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.3
sysPortCtrlOperStatus
The port's operating speed state.
Enumeration
Enumerated Values:
1down
2rate1000M-Full
3rate100M-Full
4rate100M-Half
5rate10M-Full
6rate10M-Half
7rate10G-Full
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.4
sysPortCtrlMDI
Configures interface auto/mdi/mdix mode.
The default setting is Auto.
Enumerationr/w
Enumerated Values:
1auto
2mdi
3mdix
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.5
sysPortCtrlFlowControl
Enables / disables flow control for the interface.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.6
sysPortCtrlFlowControlOper
The link parner negotiate port's operating flow control state.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.7
sysPortCtrlType
The port's media type.
Enumeration
Enumerated Values:
1fastethernet
2gigabitethernet
3fiberwith100Base-and-1000BaseSFPModule
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.8
sysPortCtrlCapability
The port's capability advertised.
Bitsr/w
Enumerated Values:
0rate10-half
1rate10-full
2rate100-half
3rate100-full
4reserve
5rate1000-full
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.9
sysPortCtrlState
Configures interface state.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.1.13.1.11

sysPortDescriptionTable

table
.1.3.6.1.4.1.171.10.75.15.2.1.14 · 1 row entry · 5 columns
Open in standard view 
The port description table.
sysPortDescriptionEntry entry .1.3.6.1.4.1.171.10.75.15.2.1.14.1
The port description entry.
Indexes
sysPortDescIndex sysPortDescMediumType
Column Syntax OID
sysPortDescIndex
This object indicates the port index.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.1.14.1.1
sysPortDescMediumType
This object indicates the port type: fiber 1G/100M or copper.
Enumeration
Enumerated Values:
100copper
101fiber
 .1.3.6.1.4.1.171.10.75.15.2.1.14.1.2
sysPortDescString
This object indicates the port description.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.1.14.1.3
sysPortUpLinkTime
This object indicates the port link up time.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.1.14.1.4
sysPortLinkChangeTime
This object indicates the port link up time.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.1.14.1.5

sysPortErrTable

table
.1.3.6.1.4.1.171.10.75.15.2.1.15 · 1 row entry · 4 columns
Open in standard view 
The port error table.
sysPortErrEntry entry .1.3.6.1.4.1.171.10.75.15.2.1.15.1
A list of information for the err port of the device.
Indexes
sysPortErrPortIndex
Column Syntax OID
sysPortErrPortIndex
This object indicates the module's port number.(1..Max port number in
the module)
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.1.15.1.1
sysPortErrPortState
This object decides whether the port state is enabled or disabled.
Enumeration
Enumerated Values:
1disabled
2enabled
 .1.3.6.1.4.1.171.10.75.15.2.1.15.1.2
sysPortErrPortStatus
This object decides whether the PortStatus is err-disabled.
Enumeration
Enumerated Values:
1other
2err-disabled
 .1.3.6.1.4.1.171.10.75.15.2.1.15.1.3
sysPortErrPortReason
This object decides whether the PortStatus is LBD.
Enumeration
Enumerated Values:
1lbd
2traffic-control
3duld
4bpdu-protection
 .1.3.6.1.4.1.171.10.75.15.2.1.15.1.4

sysPortMediaTypeTable

table
.1.3.6.1.4.1.171.10.75.15.2.1.36 · 1 row entry · 9 columns
Open in standard view 
A table to control the port specific parameters of the device like speed,
Vendor name, etc.
sysPortMediaTypeEntry entry .1.3.6.1.4.1.171.10.75.15.2.1.36.1
An entry appears in this table for each interface in the system.

Index to the table is the interface index of the port.
Indexes
sysPortMediaTypeIndex sysPortMediaType
Column Syntax OID
sysPortMediaTypeIndex
Interface index of the port for the configuration
in this entry applies.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.1
sysPortMediaType
This object indicates the port type: fiber 1G/100M or copper.
Enumeration
Enumerated Values:
100copper
101fiber
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.2
sysPortType
Configures interface speed.
Enumeration
Enumerated Values:
1rate100M
2rate1000M
3rate10G
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.3
sysPortMediaTypeVendorName
The port's VendorName.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.4
sysPortMediaTypeOui
The port's Oui.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.5
sysPortMediaTypePn
The port's Pn.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.6
sysPortMediaTypeRev
The port's Rev.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.7
sysPortMediaTypeSn
The port's Sn.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.8
sysPortMediaTypeDateCode
The port's DateCode.
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.1.36.1.9

sysScheduleRebootTable

table
.1.3.6.1.4.1.171.10.75.15.2.1.41 · 1 row entry · 5 columns
Open in standard view 
An entry containing systom restart time schedule.
sysScheduleRebootEntry entry .1.3.6.1.4.1.171.10.75.15.2.1.41.1
An entry containing systom restart time schedule.
Indexes
sysScheduleRebootIndex
Column Syntax OID
sysScheduleRebootIndex
The index for reboot schedule.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.1.41.1.1
sysScheduleRebootTimeType
Schedule Reboot Time Type. One(in) is system reboots after a time interval,
and Two(at) is system reboots at the specific date and time.
Enumerationr/w
Enumerated Values:
1in
2at
 .1.3.6.1.4.1.171.10.75.15.2.1.41.1.2
sysScheduleRebootTimeSetting
If Time is Type One(in) , the time format is min(1-43200).
If Time is Type Two(at), the time format is hh:mm ddmthyyyy(date is optional).
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.1.41.1.3
sysScheduleRebootSaveConfig
System will save configuration before restarting.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.1.41.1.4
sysScheduleRebootStatus
This object indicates the status of this entry.
To create a new entry, you must set the cameraInformationStatus
to be CreateAndGo, then this entry will turn to be Active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.1.41.1.5

ipifV6AddressTable

table
.1.3.6.1.4.1.171.10.75.15.2.2.7.14 · 1 row entry · 5 columns
Open in standard view 
A list of interface entries.
ipifV6AddressEntry entry .1.3.6.1.4.1.171.10.75.15.2.2.7.14.1
An entry containing management information applicable
to a particular interface.
Indexes
ipifV6AddressMainIndex ipifV6AddressIpAddr ipifV6AddressIpPrefix
Column Syntax OID
ipifV6AddressMainIndex
The index of this IPv6 entry.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.2.7.14.1.1
ipifV6AddressIpAddr
The ip address of this IPv6 entry.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.2.7.14.1.2
ipifV6AddressIpPrefix
The ip prefix of this IPv6 entry.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.171.10.75.15.2.2.7.14.1.3
ipifV6AddressIpType
The ip type of this IPv6 entry.
Enumeration
Enumerated Values:
1unicast
2anycast
3linklocal
 .1.3.6.1.4.1.171.10.75.15.2.2.7.14.1.4
ipifV6AddressRowStatus
The status of an entry in the Multi Interface Table. Only a subset
of the rowstatus variables (active, createAndWait, destroy) are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.2.7.14.1.5

ipv4IPIFTable

table
.1.3.6.1.4.1.171.10.75.15.2.2.7.15 · 1 row entry · 2 columns
Open in standard view 
A list of interface entries.
ipv4IPIFEntry entry .1.3.6.1.4.1.171.10.75.15.2.2.7.15.1
An entry containing management information applicable
to a particular interface.
Indexes
ipv4IfIndex
Column Syntax OID
ipv4IfIndex
The index of this interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.2.7.15.1.1
ipv4IfVLANname
The vlan name for the interface.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.2.7.15.1.2

snmpV3UserTable

table
.1.3.6.1.4.1.171.10.75.15.2.5.2.1 · 1 row entry · 8 columns
Open in standard view
snmpV3UserEntry entry .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1
Indexes
snmpV3UserName snmpV3UserVersion
Column Syntax OID
snmpV3UserName
A human readable string representing the name of
the user.

This is the (User-based Security) Model dependent
security ID.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.1
snmpV3UserVersion
A human readable string representing the name of
the user.

This is the (User-based Security) Model dependent
security ID.
Enumeration
Enumerated Values:
1v1
2v2c
3v3
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.2
snmpV3UserGroupName
The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.

This groupName is used as index into the
vacmAccessTable to select an access control policy.
Ho…
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.3
snmpV3UserAuthProtocol
An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be authenticated, and if so,
the type of authentication protocol which is used.

An …
Enumerationr/w
Enumerated Values:
1none
2md5
3sha
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.4
snmpV3UserAuthProtocolPassword OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.5
snmpV3UserPrivProtocol
An indication of whether messages sent on behalf of
this user to/from the SNMP engine identified by
usmUserEngineID, can be protected from disclosure,
and if so, the type of privacy protocol which is used.
…
Enumerationr/w
Enumerated Values:
1none
2des
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.6
snmpV3UserPrivProtocolPassword OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.7
snmpV3UserStatus
The status of this conceptual row.

Until instances of all corresponding columns are
appropriately configured, the value of the
corresponding instance of the usmUserStatus column
is 'notReady'.
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.5.2.1.1.8

snmpV3GroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.5.3.1 · 1 row entry · 7 columns
Open in standard view
snmpV3GroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1
Indexes
snmpV3GroupName snmpV3GroupSecurityModel snmpV3GroupSecurityLevel
Column Syntax OID
snmpV3GroupName
The name of the group to which this entry (e.g., the
combination of securityModel and securityName)
belongs.

This groupName is used as index into the
vacmAccessTable to select an access control policy.
Ho…
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.1
snmpV3GroupSecurityModel
In order to gain the access rights allowed by this
conceptual row, this securityModel must be in use.
Enumeration
Enumerated Values:
1v1
2v2c
3v3
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.2
snmpV3GroupSecurityLevel
The minimum level of security required in order to
gain the access rights allowed by this conceptual
row. A securityLevel of noAuthNoPriv is less than
authNoPriv which in turn is less than authPriv.

If m…
SNMP-FRAMEWORK-MIBSnmpSecurityLevel
Textual Convention: SNMP-FRAMEWORK-MIBSnmpSecurityLevel Enumeration
Type Values:
1noAuthNoPriv
2authNoPriv
3authPriv
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.3
snmpV3GroupReadViewName
The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes read access.

The identified MIB view is that one for which the
vacmViewTreeFamil…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.4
snmpV3GroupWriteViewName
The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes write access.

The identified MIB view is that one for which the
vacmViewTreeFami…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.5
snmpV3GroupNotifyViewName
The value of an instance of this object identifies
the MIB view of the SNMP context to which this
conceptual row authorizes access for notifications.

The identified MIB view is that one for which the
vacm…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.6
snmpV3GroupStatus
The status of this conceptual row.

The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:

The value of…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.5.3.1.1.7

snmpV3ViewTreeTable

table
.1.3.6.1.4.1.171.10.75.15.2.5.4.1 · 1 row entry · 5 columns
Open in standard view
snmpV3ViewTreeEntry entry .1.3.6.1.4.1.171.10.75.15.2.5.4.1.1
Indexes
snmpV3viewTreeName snmpV3viewTreeSubtree
Column Syntax OID
snmpV3viewTreeName
The human readable name for a family of view subtrees.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.4.1.1.1
snmpV3viewTreeSubtree
The MIB subtree which when combined with the
corresponding instance of vacmViewTreeFamilyMask
defines a family of view subtrees.
ObjectIdentifier .1.3.6.1.4.1.171.10.75.15.2.5.4.1.1.2
snmpV3viewTreeMask
The bit mask which, in combination with the
corresponding instance of vacmViewTreeFamilySubtree,
defines a family of view subtrees.

Each bit of this bit mask corresponds to a
sub-identifier of vacmViewTre…
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.171.10.75.15.2.5.4.1.1.3
snmpV3viewTreeType
Indicates whether the corresponding instances of
vacmViewTreeFamilySubtree and vacmViewTreeFamilyMask
define a family of view subtrees which is included in
or excluded from the MIB view.
Enumerationr/w
Enumerated Values:
1included
2excluded
 .1.3.6.1.4.1.171.10.75.15.2.5.4.1.1.4
snmpV3viewTreeStatus
The status of this conceptual row.

The RowStatus TC [RFC2579] requires that this
DESCRIPTION clause states under which circumstances
other objects in this row can be modified:

The value of…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.5.4.1.1.5

snmpV3CommunityTable

table
.1.3.6.1.4.1.171.10.75.15.2.5.5.1 · 1 row entry · 3 columns
Open in standard view
snmpV3CommunityEntry entry .1.3.6.1.4.1.171.10.75.15.2.5.5.1.1
Indexes
snmpV3CommunityName
Column Syntax OID
snmpV3CommunityName
The unique index value of a row in this table.
OctetString
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.5.5.1.1.1
snmpV3CommunityPolicy
A human readable string representing the corresponding
value of snmpCommunityName in a Security Model
independent format.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.5.1.1.2
snmpV3CommunityStatus
The status of this conceptual row in the
snmpCommunityTable.

An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through defau…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.5.5.1.1.3

ipv4snmpV3HostTable

table obsolete
.1.3.6.1.4.1.171.10.75.15.2.5.6.1 · 1 row entry · 4 columns
Open in standard view
ipv4snmpV3HostEntry entry .1.3.6.1.4.1.171.10.75.15.2.5.6.1.1
Indexes
ipv4snmpV3HostAddress
Column Syntax OID
ipv4snmpV3HostAddress obsolete
This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.5.6.1.1.1
ipv4snmpV3HostCommunityName obsolete
The locally arbitrary.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.6.1.1.2
ipv4snmpV3HostVersion obsolete
The Level of Security to be used when generating
SNMP messages using this entry.
Enumerationr/w
Enumerated Values:
1v1
2v2c
3v3NoAuthNoPriv
4v3AuthNoPriv
5v3AuthPriv
 .1.3.6.1.4.1.171.10.75.15.2.5.6.1.1.3
ipv4snmpV3HostStatus obsolete SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.5.6.1.1.4

snmpV3HostTable

table
.1.3.6.1.4.1.171.10.75.15.2.5.6.2 · 1 row entry · 6 columns
Open in standard view
snmpV3HostEntry entry .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1
Indexes
snmpV3HostAddress snmpV3IPType
Column Syntax OID
snmpV3HostAddress
This object contains a transport address. The format of
this address depends on the value of the
snmpTargetAddrTDomain object. And this object is unique
identifier associated with this snmpNotifyEntry.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1.1
snmpV3IPType
Type of IP interface.
Enumeration
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1.2
snmpV3HostCommunityName
The locally arbitrary.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1.3
snmpV3HostVersion
The Level of Security to be used when generating
SNMP messages using this entry.
Enumerationr/w
Enumerated Values:
1v1
2v2c
3v3NoAuthNoPriv
4v3AuthNoPriv
5v3AuthPriv
 .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1.4
snmpV3HostInterfaceName
Specifies the interface name when the syslogSrvIP is linklocal address.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1.5
snmpV3HostStatus SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.5.6.2.1.6

stpPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.6.2 · 1 row entry · 13 columns
Open in standard view 
A table that contains port-specific information
for the Spanning Tree Protocol.
stpPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.6.2.1
A list of information maintained by every port
about the Spanning Tree Protocol state for that
port.
Indexes
stpPort
Column Syntax OID
stpPort
The Port number of the port for which this entry contains
spanning tree information.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.1
stpPortStatus
Current state of the Port which can be changed to either
Disabled or Enabled for ALL spanning tree
instances. Setting this object will override the port's
status in any of the MSTI contexts
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.2
stpPortPriority
The four most significant bits of the Port Identifier
of the Spanning Tree instance can be modified by setting
the CistPortPriority value. The values that are set for Port
Priority must be in steps of 16.
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.3
stpAdminPortPathCost
The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. Writing a value of '0' assigns the
automatically calculated default Path Cost value to
the ohter object …
Integer32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.4
stpPortPathCost
The contribution of this port to the path cost of
paths towards the CIST Root which include this port.
Integer32
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.5
stpPortProtocolMigration
Indicates the Protocol migration state of this Port.
When operating in RSTP/MSTP (version >= 2) mode, writing
TRUE(1) to this object forces this port to transmit MSTP
BPDUs without instance information.
Any o…
Enumerationr/w
Enumerated Values:
0false
1true
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.6
stpPortEdge
This parameter when TRUE(1) indicates that detection of a port
as Edge Port happens automatically and FALSE(2)
indicates that this feature is disabled.
Enumerationr/w
Enumerated Values:
0false
1true
2auto
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.7
stpPortAdminP2P
The administrative point-to-point status of the LAN segment
attached to this port. A value of forceTrue(0) indicates that
this port should always be treated as if it is connected to
a point-to-point link. A value of f…
Enumerationr/w
Enumerated Values:
0forceTrue
1forceFalse
2auto
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.8
stpPortRestrictedRole
A Boolean value set by management. If TRUE causes the Port not
to be selected as Root Port for the CIST or any MSTI, even it has
the best spanning tree priority vector. Such a Port will be selected
as an Alternate Po…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.9
stpPortRestrictedTCN
A Boolean value set by management. If TRUE causes the Port not
to propagate received topology change notifications and topology
changes to other Ports. This parameter should be FALSE by default.
If set it can cause t…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.10
stpPortHelloTime
The amount of time between the transmission of
Configuration bridge PDUs by this node in units
of hundredths of a second.
Integer32r/w
Constraints:
range: 100-1000
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.11
stpPortState
Current state of the Port as defined by the Common
spanning tree protocol.
Enumeration
Enumerated Values:
1disabled
2discarding
4learning
5forwarding
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.12
stpPortFowardBPDU
This object is for enabling or disabling forward BPDU.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.6.2.1.13

mstVlanMstiMappingTable

table
.1.3.6.1.4.1.171.10.75.15.2.6.3.7 · 1 row entry · 8 columns
Open in standard view 
This table contains one entry for each instance of MSTP. 
This table maintains context ID as one more index to 
support Multiple Instances.
mstVlanMstiMappingEntry entry .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1
A conceptual row containing the status of the MSTP instance.
Indexes
mstInstanceIndex
Column Syntax OID
mstInstanceIndex
An arbitrary integer within the range from 1 to the value of
Max Instance Number that uniquely identifies an instance.
Integer32
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.1
mstSetVlanList
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.2
mstResetVlanList
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.3
mstInstanceVlanMapped
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.4
mstInstanceVlanMapped2k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1024 through 2047. The
first octet corresponds to VLANs with VlanIndex values
1024 through 1031; the second octet to VLANs 1032
through 1039…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.5
mstInstanceVlanMapped3k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2048 through 3071. The
first octet corresponds to VLANs with VlanIndex values
of 2048 through 2055; the second octet to VLANs 2056
through 2…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.6
mstInstanceVlanMapped4k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3072 through 4095. The
first octet corresponds to VLANs with VlanIndex values
3072 through 3079; the second octet to VLANs 3080
through 3087…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.7
mstDeleteInstanceStatus
Delete Instance Index.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.6.3.7.1.8

mstMstiBridgeTable

table
.1.3.6.1.4.1.171.10.75.15.2.6.4.20 · 1 row entry · 5 columns
Open in standard view 
Table containing Bridge Information specific to Spanning 
Tree Instance. This table maintains context ID as one 
more index to support Multiple Instances.
mstMstiBridgeEntry entry .1.3.6.1.4.1.171.10.75.15.2.6.4.20.1
Entry indicating the Bridge Information.
Indexes
mstMstiInstanceIndex
Column Syntax OID
mstMstiInstanceIndex
Spanning Tree Instance to which the information belongs.
Integer32
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.6.4.20.1.1
mstMstiBridgePriority
The writable portion of the MSTI Bridge Identifier.
comprising of the first two octets.
The values that are set for Bridge Priority must be
in steps of 4096.
Integer32r/w
Constraints:
range: 0-61440
 .1.3.6.1.4.1.171.10.75.15.2.6.4.20.1.2
mstMstiStatus
The administrative status requested by management for the MST
feature. The value enabled(1) indicates that Mst should be enabled
in the device on all ports. The value disabled(2) indicates that
Mst should be disabl…
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.6.4.20.1.3
mstMstistpTopologyChangesCount
The number of times that there have been atleast
one non-zero TcWhile Timer on this Bridge for Common
Spanning Tree context.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.6.4.20.1.4
mstMstistpLastTopologyChange
The time (in hundredths of a second) since the
TcWhile Timer for any port in this Bridge was
non-zero for this spanning tree instance.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.6.4.20.1.5

mstCistPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.6.5.1 · 1 row entry · 7 columns
Open in standard view 
This table contains Common Spanning Tree Port
Information.
mstCistPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1
A list of information maintained by every port for
Common Spanning tree.
Indexes
mstCistPort
Column Syntax OID
mstCistPort
The Port number of the port for which this entry contains
spanning tree information.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.1
mstCistPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.2
mstCistPortAdminPathCost
The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.
Integer32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.3
mstCistPortPathCost
The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.
Integer32
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.4
mstCistPortPriority
The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priori…
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.5
mstCistForcePortState
Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'fsMIMstCistForcePortState' is set to 'enabled' fo…
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.6
mstCistCurrentPortRole
Current Port Role of the port for this spanning
tree instance.
Enumeration
Enumerated Values:
0disabled
1alternate
2backup
3root
4designated
5master
6root-inconsistent
 .1.3.6.1.4.1.171.10.75.15.2.6.5.1.1.7

mstMstiPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.6.5.2 · 1 row entry · 7 columns
Open in standard view 
This table contains Spanning Tree Instance Specific Port
Information.
mstMstiPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1
A list of information maintained by every port for each
and every spanning tree instance.
Indexes
mstMstiPort mstInstanceIndex
Column Syntax OID
mstMstiPort
The Port number of the port for which this entry contains
spanning tree information.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.1
mstMstiPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.
BridgeId
Textual Convention: BridgeId OctetString
Type Constraints:
range: 8
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.2
mstMstiPortAdminPathCost
The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.
Integer32r/w
Constraints:
range: 0-200000000
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.3
mstMstiPortPathCost
The contribution of this port to the path cost of
paths towards the MSTI Root which include this port.
Integer32
Constraints:
range: 1-200000000
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.4
mstMstiPortPriority
The four most significant bits of the Port Identifier
for a given Spanning Tree instance can be modified
independently for each Spanning Tree instance
supported by the Bridge. The values that are set for Port
Priori…
Integer32r/w
Constraints:
range: 0-240
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.5
mstMstiForcePortState
Current state of the Port which can be changed to either
Disabled or Enabled for the specific spanning tree
instance. This object can be set to enabled only if the
'fsMIMstCistForcePortState' is set to 'enabled' fo…
Enumeration
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.6
mstMstiCurrentPortRole
Current Port Role of the port for this spanning
tree instance.
Enumeration
Enumerated Values:
0disabled
1alternate
2backup
3root
4designated
5master
6root-inconsistent
 .1.3.6.1.4.1.171.10.75.15.2.6.5.2.1.7

dot1qVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.7.6 · 1 row entry · 7 columns
Open in standard view 
A table containing static configuration information for
each VLAN configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.
dot1qVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.7.6.1
Information for a VLAN configured into the
device by (local or network) management.
Indexes
dot1qVlanId
Column Syntax OID
dot1qVlanId
An administratively assigned Id, which is used
to identify the VLAN.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.1
dot1qVlanName
An administratively assigned string, which may be used
to identify the VLAN.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.2
dot1qVlanEgressPorts
The set of ports which are permanently assigned to the
egress list for this VLAN by management. Changes to a
bit in this object affect the per-port per-VLAN
Registrar control for Registration Fixed for the
relevant GVR…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.3
dot1qVlanForbiddenPorts
The set of ports which are prohibited by management
from being included in the egress list for this VLAN.
Changes to this object that cause a port to be included
or excluded affect the per-port per-VLAN Registrar
contro…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.4
dot1qVlanUntaggedPorts
The set of ports which should transmit egress packets
for this VLAN as untagged. The default value of this
object for the default VLAN (dot1qVlanIndex = 1) is a string
of appropriate length including all ports. There …
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.5
dot1qVlanAdvertisementStatus
Enable/Disable Advertisement Status of the IEEE 802.1Q VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.6
dot1qVlanRowStatus
The status of a row in dot1qVlanTable. By setting this object, new
entries can be created in dot1qVlanTable and existing entries can be
removed from dot1qVlanTable. It can be used as specified in the SNMP
v2 standard.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.7.6.1.7

dot1qVlanPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.7.7 · 1 row entry · 1 columns
Open in standard view 
A table containing per port control and status
information for VLAN configuration in the device.
dot1qVlanPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.7.7.1
Information controlling VLAN configuration for a port
on the device.
Indexes
No indexes recorded
Column Syntax OID
dot1qVlanPvid
The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.
VlanIndexr/w
Textual Convention: VlanIndex Unsigned32
 .1.3.6.1.4.1.171.10.75.15.2.7.7.1.1

laPortChannelTable

table
.1.3.6.1.4.1.171.10.75.15.2.8.1.3 · 1 row entry · 5 columns
Open in standard view 
A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel.
laPortChannelEntry entry .1.3.6.1.4.1.171.10.75.15.2.8.1.3.1
There is one entry in this table for each created
port-channel port.
Indexes
laPortChannelIfIndex
Column Syntax OID
laPortChannelIfIndex
The index of the port-channel(Aggregator's
interface index).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.8.1.3.1.1
laPortChannelMemberList
Member Port list of the port channel. Add the ports as a
aggregation member associated of a port-channel.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.8.1.3.1.2
laPortChannelMode
Current Operating Channel Mode of the port channel
Lacp(1) - forcing the port to negotiate with the
partner.
manual(2) - force the port to enable channeling (Manual).
disable(3) - channeling is disabled.
PortLaModer/w
Textual Convention: PortLaMode Enumeration
Type Values:
1lacp
2static
3disable
 .1.3.6.1.4.1.171.10.75.15.2.8.1.3.1.3
laPortChannelMasterPort
The master port of the port-channel.
IF-MIBInterfaceIndexr/w
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.8.1.3.1.4
laPortChannelActiveMemberPorts
This object indicates the operational bundled ports in this
channel group.
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.8.1.3.1.5

laPortControlTable

table
.1.3.6.1.4.1.171.10.75.15.2.8.2.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains Link Aggregation Control
configuration information about every
Aggregation Port associated with this device.
A row appears in this table for each physical port.
laPortControlEntry entry .1.3.6.1.4.1.171.10.75.15.2.8.2.1.1
A list of Link Aggregation Control configuration
parameters for each Aggregation Port on this device.
Indexes
laPortControlIndex
Column Syntax OID
laPortControlIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.8.2.1.1.1
laPortActorPortPriority
The priority value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.8.2.1.1.2
laPortActorActivity
This object indicates LACP_Activity to this Aggregation Port.
LACP can be configured in one of two modes: active or passive.
In active mode it will always send frames along the configured links.
If the actor and part…
Enumerationr/w
Enumerated Values:
1active
2passive
 .1.3.6.1.4.1.171.10.75.15.2.8.2.1.1.3
laPortActorTimeout
This object indicates LACP_Timeout to this Aggregation Port.
short(1) - LACP Timeout 3 seconds.
long (2) - LACP Timeout 90 seconds.
Enumerationr/w
Enumerated Values:
1short
2long
 .1.3.6.1.4.1.171.10.75.15.2.8.2.1.1.4

staticTable

table
.1.3.6.1.4.1.171.10.75.15.2.9.3 · 1 row entry · 4 columns
Open in standard view 
A list of the Static MACs
staticEntry entry .1.3.6.1.4.1.171.10.75.15.2.9.3.1
A Static MAC entry containing the mac and forwarding port.
Indexes
staticVlanID staticMac staticPort
Column Syntax OID
staticVlanID
The VLAN ID of the static MAC entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.9.3.1.1
staticMac
The MAC address associated of the static MAC entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.9.3.1.2
staticPort
The forwarding port of the static MAC entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.9.3.1.3
staticStatus
The status of an entry in the Static MAC Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. The trunk member port can not set up static MAC.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.9.3.1.4

autoFdbTable

table
.1.3.6.1.4.1.171.10.75.15.2.9.4 · 1 row entry · 6 columns
Open in standard view 
A list of the Auto Fdb
autoFdbEntry entry .1.3.6.1.4.1.171.10.75.15.2.9.4.1
A auto fdb entry containing the ipaddress
Indexes
autoFdbIPAddress
Column Syntax OID
autoFdbIPAddress
The IpAddress of the autoFdbEntry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.9.4.1.1
autoFdbVlanID
The VlanID of the autoFdbEntry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.9.4.1.2
autoFdbMacAddress
The Mac Address of the autoFdbEntry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.9.4.1.3
autoFdbPort
The Port of the autoFdbEntry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.9.4.1.4
autoFdbTimeStamp
The Time Stamp of the autoFdbEntry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.9.4.1.5
autoFdbStatus
The status of an entry in the Auto Fdb Table. Only a subset
of the rowstatus variables (createAndGo, createAndWait,destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.9.4.1.6

igsVlanRouterTable

table
.1.3.6.1.4.1.171.10.75.15.2.10.3.3 · 1 row entry · 2 columns
Open in standard view 
This table contains the list of ports through which 
a router, in a particular VLAN is reachable.
igsVlanRouterEntry entry .1.3.6.1.4.1.171.10.75.15.2.10.3.3.1
Contains the VLAN ID and list of ports on which
routers are present in the VLAN.
Indexes
igsVlanRouterVlanId
Column Syntax OID
igsVlanRouterVlanId
VLAN ID of the ports through which router is reachable.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.10.3.3.1.1
igsVlanRouterPortList
List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.10.3.3.1.2

igsVlanFilterTable

table
.1.3.6.1.4.1.171.10.75.15.2.10.3.4 · 1 row entry · 17 columns
Open in standard view 
This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is  
enabled in the system.
igsVlanFilterEntry entry .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1
Contains snooping status , version and fast leave
configuration for a specific VLAN.
Indexes
igsVlanFilterVlanId
Column Syntax OID
igsVlanFilterVlanId
Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in IgsVlanFilterEntry is to be done.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.1
igsVlanSnoopStatus
This object allows you to enable/disable IGS function on a specific VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.2
igsVlanQuerier
Indicates whether the switch is configured as a querier in the VLAN
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.3
igsVlanCfgQuerier
The snooping switch can be configured as a querier via this object
to send out IGMP general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.4
igsVlanQueryInterval
This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in th…
Integer32r/w
Constraints:
range: 60-600
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.5
igsVlanRtrPortList
List of ports which are configured statically as router ports
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.6
igsVlanFbdRtrPortList
List of ports which can be configured statically as forbidden router ports.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.7
igsVlanFastLeave
Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removin…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.8
igsVlanDataDrivenLearningStatus
This object allows you to enable/disable
Data Driven Learning function on a specific VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.9
igsVlanQuerierVersionStatus
This object allows you to enable/disable
Querier Version function on a specific VLAN.
Enumerationr/w
Enumerated Values:
2igmp-v2
3igmp-v3
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.10
igsVlanDataDrivenLearningAgeOutStatus
This object allows you to enable/disable
Data Driven Learning Age Out State on a specific VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.11
igsVlanReportSuppression
Enables or disables Report suppression in the system.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.12
igsVlanRobustnessValue
When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number of queries sent by the swit…
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.13
igsVlanGrpQueryInterval
The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there is any intersted receivers. The switch will send
'igsRobustnessValue' queries bef…
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.14
igsVlanQueryMaxResponseTime
The maximum query response time advertised in IGMPv2 general
queries on this interface.
Integer32r/w
Constraints:
range: 10-25
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.15
igsVlanProxyReportingStatus
This indicates the Proxy Reporting State of this VLAN.
When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for
a specific (S,G) before sending to the router port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.16
igsVlanProxyReportingSourceIP
This indicates the IP source address of the igmp report
sended by the IGMP snooping proxy reporting in this VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.17

igsVlanMulticastGroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.10.3.5 · 1 row entry · 4 columns
Open in standard view 
This table contains MAC based multicast forwarding 
information.
igsVlanMulticastGroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.10.3.5.1
This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded.
Indexes
igsVlanMulticastGroupVlanId igsVlanMulticastGroupIpAddress
Column Syntax OID
igsVlanMulticastGroupVlanId
VLAN ID pertaining to the Multicast forwarding entry
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.10.3.5.1.1
igsVlanMulticastGroupIpAddress
Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.10.3.5.1.2
igsVlanMulticastGroupMacAddress
Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.10.3.5.1.3
igsVlanMulticastGroupPortList
List of ports onto which the multicast data
packets destined for this group will be forwarded.
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.10.3.5.1.4

igsHostTable

table
.1.3.6.1.4.1.171.10.75.15.2.10.6.1 · 1 row entry · 4 columns
Open in standard view 
This table is used to manage
the IGMP Host based Fast Leave function of the switch.
igsHostEntry entry .1.3.6.1.4.1.171.10.75.15.2.10.6.1.1
Contains management entities for
IGMP Host based fast leave function.
Indexes
igsHostTableVLANID igsHostTableGroupAddress igsHostTablePort igsHostTableHostIPAddress
Column Syntax OID
igsHostTableVLANID
VLAN ID of Host table entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.10.6.1.1.1
igsHostTableGroupAddress
Group address of Host table entry.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.10.6.1.1.2
igsHostTablePort
Port number of Host table entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.10.6.1.1.3
igsHostTableHostIPAddress
Host IP address of Group in Host table entry.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.10.6.1.1.4

gvrpSettingsTable

table
.1.3.6.1.4.1.171.10.75.15.2.11.5 · 1 row entry · 5 columns
Open in standard view 
A table containing static configuration information for
each GVRP configured into the device by (local or
network) management.  All entries are permanent and will
be restored after the device is reset.
gvrpSettingsEntry entry .1.3.6.1.4.1.171.10.75.15.2.11.5.1
Information for a GVRP configured into the
device by (local or network) management.
Indexes
gvrpSettingsPortControlIndex
Column Syntax OID
gvrpSettingsPortControlIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.11.5.1.1
gvrpSettingsPVID
The PVID value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.11.5.1.2
gvrpSettingsGVRPState
Enable/Disable GVRP State to this Aggregation Port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.11.5.1.3
gvrpSettingsIngressChecking
Enable/Disable Ingress Checking mechanism of GVRP to this Aggregation Port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.11.5.1.4
gvrpSettingsAcceptableFrameType
Chose types All Frames/Tagged to this Aggregation Port.
Enumerationr/w
Enumerated Values:
1allFrames
2taggedOnly
 .1.3.6.1.4.1.171.10.75.15.2.11.5.1.5

cosClassTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.2.1 · 1 row entry · 2 columns
Open in standard view 
A list of cosOutputSchedule.
cosClassEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.2.1.1
A list of cosOutputClass Weight.
Indexes
cosClassIndex
Column Syntax OID
cosClassIndex
A index of class 0 ~ 3.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.171.10.75.15.2.12.2.1.1.1
cosWeight
cos weight
Integer32r/w
Constraints:
range: 1-55
 .1.3.6.1.4.1.171.10.75.15.2.12.2.1.1.2

qosDefaultUserPriTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.4.1 · 1 row entry · 3 columns
Open in standard view 
A list of 802.1p port default priority Entries.
qosDefaultUserPriEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.4.1.1
A list of 802.1p port default priority priorities.
Indexes
qosDefaultUserPriPortIndex
Column Syntax OID
qosDefaultUserPriPortIndex
A port identifier that is in the range of 1 to ifNumber.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.12.4.1.1.1
qosDefaultPriority
For ingress untagged packets, the per port 'Default Priority'
setting will be applied to packets of each port to provide
port-based traffic prioritization when 802.1p is enabled.
Enumerationr/w
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.171.10.75.15.2.12.4.1.1.2
qosEffectiveDefaultPriority
For ingress untagged packets, the per port 'Effective Default
Priority' setting will be applied to packets of each port to
provide port-based traffic prioritization when 802.1p is enabled.
Enumeration
Enumerated Values:
0priority0
1priority1
2priority2
3priority3
4priority4
5priority5
6priority6
7priority7
 .1.3.6.1.4.1.171.10.75.15.2.12.4.1.1.3

qosUserPriorityTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.5.1 · 1 row entry · 2 columns
Open in standard view 
A table mapping evaluated User Priority to Traffic
Class, for forwarding by the bridge.  Traffic class is a
number in the range (0..3).
qosUserPriEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.5.1.1
User Priority to Traffic Class mapping.
Indexes
qosUserPriIndex
Column Syntax OID
qosUserPriIndex
For ingress tagged packets, D-Link Smart Switches will refer
to these information and prioritize them with 4 different priority queues.
If 802.1p is enabled.
Integer32
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.10.75.15.2.12.5.1.1.1
qosUserPriClass
The User Class the received frame is mapped to.
Enumerationr/w
Enumerated Values:
0low
1medium
2high
3highest
 .1.3.6.1.4.1.171.10.75.15.2.12.5.1.1.2

qosPriSettingsTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.7.1 · 1 row entry · 2 columns
Open in standard view 
A list of port priority settings.
qosPriSettingsEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.7.1.1
A list of port priority settings Entries.
Indexes
qosPriSetPortIndex
Column Syntax OID
qosPriSetPortIndex
A port identifier that is in the range of 1 to ifNumber.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.12.7.1.1.1
qosPriSetPortType
The port priority setting type. (ex. none = 0,
802.1p = 2, DSCP = 4. If you want enable 802.1p & DSCP, the value
is 2 + 4 = 6.
Enumerationr/w
Enumerated Values:
0none
2ieee8021P
4dscp-tos
6ieee8021P-dscp-tos
 .1.3.6.1.4.1.171.10.75.15.2.12.7.1.1.2

ipv4aclQosTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.8.1 · 1 row entry · 9 columns
Open in standard view 
A list of priority by acl setting.
ipv4aclQosEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1
A list of priority by acl setting entry.
Indexes
ipv4aclQosIndex
Column Syntax OID
ipv4aclQosIndex
Index of priority by acl setting.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.1
ipv4aclQosType
Type of priority by acl setting.
Enumerationr/w
Enumerated Values:
0mac
1ip
2tcp
3udp
4vlanid
5protocol
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.2
ipv4aclQosMACAddr
Dst MAC of priority by acl setting.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.3
ipv4aclQosIPAddr
Dst IP of priority by acl setting
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.4
ipv4aclQosTCPUDPPort
Dst TCP/UDP port of priority by acl setting
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.5
ipv4aclQosVlanID
VLAN ID of priority by acl setting
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.6
ipv4aclQosProtocol
Ip protocol number of priority by acl setting
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.7
ipv4aclQosAssignClass
Be mapped class of priority by acl setting.
Enumerationr/w
Enumerated Values:
0class0
1class1
2class2
3class3
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.8
ipv4aclQosStatus
Status of priority by acl setting.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.12.8.1.1.9

aclQosTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.8.2 · 1 row entry · 11 columns
Open in standard view 
A list of priority by acl setting.
aclQosEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1
A list of priority by acl setting entry.
Indexes
aclQosIndex
Column Syntax OID
aclQosIndex
Index of priority by acl setting.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.1
aclQosType
Type of priority by acl setting.
Enumerationr/w
Enumerated Values:
0mac
1ip
2tcp
3udp
4vlanid
5protocol
6ipv6
7ipv6traffic-class
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.2
aclQosMACAddr
Dst MAC of priority by acl setting.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.3
aclQosIPAddr
Dst IP of priority by acl setting
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.4
aclQosIPv6Addr
Dst IP of priority by acl setting.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.5
aclQosTCPUDPPort
Dst TCP/UDP port of priority by acl setting
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.6
aclQosVlanID
VLAN ID of priority by acl setting
Integer32r/w
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.7
aclQosProtocol
Ip protocol number of priority by acl setting
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.8
aclQosIP6TC
Ipv6 Traffic Class number of priority by acl setting
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.10
aclQosAssignClass
Be mapped class of priority by acl setting.
Enumerationr/w
Enumerated Values:
0class0
1class1
2class2
3class3
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.98
aclQosStatus
Status of priority by acl setting.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.12.8.2.1.99

cosBandwidthCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.12.9.1 · 1 row entry · 5 columns
Open in standard view 
A list of cosBandwidthCtrlEntry default priority Entries.
cosBandwidthCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.12.9.1.1
A list of cosBandwidthCtrlEntry default priority priorities.
Indexes
cosBandwidthCtrlPortIndex cosBandwidthCtrlClassIndex
Column Syntax OID
cosBandwidthCtrlPortIndex
A port identifier that is in the range of 1 to ifNumber.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.12.9.1.1.1
cosBandwidthCtrlClassIndex
A BandwidthCtrlClassIndex identifier that is in the range of 1 to ifNumber.
Integer32
Constraints:
range: 0-3
 .1.3.6.1.4.1.171.10.75.15.2.12.9.1.1.2
cosBandwidthValue
The BandwidthValue return value.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.12.9.1.1.3
cosBandwidthEffectiveRX
A speed rate of Effective RX.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.12.9.1.1.4
cosBandwidthEffectiveTX
A speed value of Effective TX.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.12.9.1.1.5

bandwidthCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.13.1.2 · 1 row entry · 5 columns
Open in standard view 
A table to control the rate limiting parameters 
either for the entire switch or for each interface in the switch.
bandwidthCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.13.1.2.1
An entry appears in this table for each physical
interface in the switch.
Indexes
bandwidthCtrlIndex
Column Syntax OID
bandwidthCtrlIndex
The interface index for which the configuration in this
entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.13.1.2.1.1
bandwidthCtrlTxThreshold
Configures interface Rate Limit (Packet that can be transferred
on a port at a particular second).

This object's value will take effect on the interface speed. Based
on the operating speed of the port, th…
Integer32r/w
Constraints:
range: 0-0
range: 64-1024000
 .1.3.6.1.4.1.171.10.75.15.2.13.1.2.1.2
bandwidthCtrlRxThreshold
Allows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets…
Integer32r/w
Constraints:
range: 0-0
range: 64-1024000
 .1.3.6.1.4.1.171.10.75.15.2.13.1.2.1.3
bandwidthEffecTxThreshold
This object's value will take effect on the interface speed. Based
on the operating speed of the port, the rate limit will be applied.
This value can also be affected by the metering. A value of zero(0)
disable rate lim…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.13.1.2.1.4
bandwidthEffecRxThreshold
Allows to configure the limiting value for the maximum number
of receive packets that can be transmitted per second over this
interface. Setting this object to the value zero disables rate
limiting for receive packets…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.13.1.2.1.5

trafficCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.13.4.4 · 1 row entry · 14 columns
Open in standard view 
The traffic control table.
trafficCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1
The traffic control entry.
Indexes
trafficCtrlIndex
Column Syntax OID
trafficCtrlIndex
The traffic control index.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.1
trafficCtrlActionModeForUnicast
The action mode of traffic control for unicast.
Enumerationr/w
Enumerated Values:
0drop
1shutdown
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.2
trafficCtrlActionModeForMulticast
The action mode of traffic control for multicast.
Enumerationr/w
Enumerated Values:
0drop
1shutdown
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.3
trafficCtrlActionModeForBroadcast
The action mode of traffic control for broadcast.
Enumerationr/w
Enumerated Values:
0drop
1shutdown
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.4
trafficCtrlType
The control type of traffic control.
(b: Broadcast, m: Multicast, u: Unknown Unicast)
Enumerationr/w
Enumerated Values:
0none
1b
2m
3mb
4u
5ub
6um
7umb
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.5
trafficCtrlThresholdForUnicast
The threshold of traffic control for unicast.
Integer32r/w
Constraints:
range: 1-102400
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.6
trafficCtrlThresholdForMulticast
The threshold of traffic control for multicast.
Integer32r/w
Constraints:
range: 1-102400
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.7
trafficCtrlThresholdForBroadcast
The threshold of traffic control for broadcast.
Integer32r/w
Constraints:
range: 1-102400
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.8
trafficCtrlCountDownForUnicast
The count down value of traffic control for unicast.
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.9
trafficCtrlCountDownForMulticast
The count down value of traffic control for multicast.
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.10
trafficCtrlCountDownForBroadcast
The count down value of traffic control for broadcast.
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.11
trafficCtrlTimeIntervalForUnicast
The time interval of traffic control for unicast.
Integer32r/w
Constraints:
range: 5-30
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.12
trafficCtrlTimeIntervalForMulticast
The time interval of traffic control for multicast.
Integer32r/w
Constraints:
range: 5-30
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.13
trafficCtrlTimeIntervalForBroadcast
The time interval of traffic control for broadcast.
Integer32r/w
Constraints:
range: 5-30
 .1.3.6.1.4.1.171.10.75.15.2.13.4.4.1.14

ipv4trustedHostTable

table obsolete
.1.3.6.1.4.1.171.10.75.15.2.14.1.2 · 1 row entry · 3 columns
Open in standard view 
A table to configure trusted host in the system.
ipv4trustedHostEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.1.2.1
Each entry in this table represents rules for particular
trusted host.
Indexes
ipv4trustedHostIpAddr ipv4trustedHostIpMask
Column Syntax OID
ipv4trustedHostIpAddr obsolete
The IP address of host you allow to access to D-Link Smart
Switch.
Your local host IP Addresses must be one of the IP Addresses
to avoid disconnection.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.14.1.2.1.1
ipv4trustedHostIpMask obsolete
Used to mask with IP address, it allow you set a subnet as a
trusted host entry.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.14.1.2.1.2
ipv4trustedHostRowStatus obsolete
The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.1.2.1.3

trustedHostTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.1.3 · 1 row entry · 4 columns
Open in standard view 
A table to configure trusted host for in the system.
trustedHostEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.1.3.1
Each entry in this table represents rules for particular
trusted host.
Indexes
trustedHostIPType trustedHostIpAddr trustedHostIpMask
Column Syntax OID
trustedHostIPType
Type of IP interface.
Enumeration
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.14.1.3.1.1
trustedHostIpAddr
The IP address of host you allow to access to D-Link Smart
Switch.
Your local host IPv4/6 Addresses must be one of the IP Addresses
to avoid disconnection.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.14.1.3.1.2
trustedHostIpMask
Used to mask with IPv4/6 address, it allow you set a subnet as a
trusted host entry.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.14.1.3.1.3
trustedHostRowStatus
The status of an entry in the Trusted Host Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.1.3.1.4

portSecTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.2.1 · 1 row entry · 4 columns
Open in standard view 
A table to control port security features of the device.
portSecEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.2.1.1
An entry appears in port security table for each interface
in the system.
Indexes
portSecIndex
Column Syntax OID
portSecIndex
The interface index for which the configuration in this
entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.14.2.1.1.1
portSecState
Enable / disable port security admin state for the interface.

A given ports' dynamic MAC address learning will be stopped such
that the current source MAC addresses entered into the MAC address
forwarding…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.14.2.1.1.2
portSecMLA
Configures interface port security maximum learning address
numbers.

When given ports' admin state is enabled, allows forwarding
table learning address number. The number can be set 0 to 6…
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.171.10.75.15.2.14.2.1.1.3
portSecLockAddrMode
Configures port security lock address mode for the interface.

deleteOnReset : The locked addresses will not age out until the Switch has been reset.
deleteOnTimeout : The locked addresses will age out aft…
Enumerationr/w
Enumerated Values:
1deleteOnReset
2deleteOnTimeout
3permanent
 .1.3.6.1.4.1.171.10.75.15.2.14.2.1.1.4

portSecFDBPermanentTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.2.2 · 1 row entry · 4 columns
Open in standard view 
A table to control port security FDB Permanent of the device.
portSecFDBPermanentEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.2.2.1
An entry appears in port security table for each interface
in the system.
Indexes
portSecFDBPermPort portSecFDBPermIndex
Column Syntax OID
portSecFDBPermIndex
The index of the port security MAC entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.14.2.2.1.1
portSecFDBPermVlanID
The VLAN ID of the port security MAC entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.2.2.1.2
portSecFDBPermMac
The MAC address associated of the port security MAC entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.2.2.1.3
portSecFDBPermPort
The forwarding port of the port security MAC entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.14.2.2.1.4

aRPSpoofPreventTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.3.1 · 1 row entry · 4 columns
Open in standard view 
A table to control ARP Spoofing prevention for the entire 
switch or for each interface in the switch.
aRPSpoofPreventEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.3.1.1
An entry appears in this table for each interface
in the system.
Indexes
aRPSpoofPreventIpAddr
Column Syntax OID
aRPSpoofPreventIpAddr
Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.14.3.1.1.1
aRPSpoofPreventMacAddress
Ethernet Mac Address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.3.1.1.2
aRPSpoofPreventPortList
Specifies the port numbers through which the authorized manager can
access the switch.

By default the authorized manager is allowed to access the switch
through all the ports.

If a set of…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.14.3.1.1.3
aRPSpoofPreventRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.3.1.1.4

filterDHCPServerTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.7.4 · 1 row entry · 5 columns
Open in standard view 
A table to control filter DHCP Server for the entire
switch or for each interface in the switch.
filterDHCPServerEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.7.4.1
An entry appears in this table for each interface
in the system.
Indexes
filterDHCPServerIpAddr filterDHCPServerClientMacAddr
Column Syntax OID
filterDHCPServerIpAddr
Specifies either the Network or Host address from which the switch
can be managed.
An address 0.0.0.0 indicates 'Any Manager'.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.14.7.4.1.1
filterDHCPServerClientMacAddr
Ethernet Mac Address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.7.4.1.2
filterDHCPServerPortList
Specifies the port numbers through which the authorized manager can
access the switch.

By default the authorized manager is allowed to access the switch
through all the ports.

If a set of p…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.14.7.4.1.3
filterDHCPServerVlanList
Specifies the port numbers through which the authorized manager can
access the switch.

By default the authorized manager is allowed to access the switch
through all the ports.

If a set of p…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.14.7.4.1.4
filterDHCPServerRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.7.4.1.99

sshUserInfoTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.8.12 · 1 row entry · 5 columns
Open in standard view 
A table to configure SSH user auth in the system.
sshUserInfoEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.8.12.1
An entry to configure user auth in the system.
Indexes
sshUserInfoID
Column Syntax OID
sshUserInfoID
The Schedule identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 8.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.75.15.2.14.8.12.1.1
sshUserInfoUserName
The ssh user name associated with the SSH suer Info. entry (e.g., `admin, user').
OctetString
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.14.8.12.1.2
sshUserInfoAuth
The object indicates which auth used by the user.
Enumerationr/w
Enumerated Values:
1hostbased
2password
4publickey
 .1.3.6.1.4.1.171.10.75.15.2.14.8.12.1.3
sshUserInfoHostName
The ssh host name associated with the SSH suer Info. entry (e.g., `DUT1, DUT2').
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.14.8.12.1.4
sshUserInfoHostIp
SSH HostBased IP Address of the system.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.14.8.12.1.5

trafficSegTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.9.1 · 1 row entry · 2 columns
Open in standard view 
A Port-channel is created through ifMain table.
After the creation of the port-channel, corresponding logical
interface will be created in the ifMain table. 
This Port-channel table is indexed through Key values and allows to 
configure link selection policy and the Mac address for 
the port-channel. All other objects in this table displays 
the details of the port-channel
trafficSegEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.9.1.1
There is one entry in this table for each created
port-channel port
Indexes
trafficSegIfIndex
Column Syntax OID
trafficSegIfIndex
The ifIndex of the port-channel(Aggregator's
interface index).
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.9.1.1.1
trafficSegMemberList
Port list of port channel.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.14.9.1.1.2

impbSettingTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.10.1 · 1 row entry · 22 columns
Open in standard view 
A table to control IP-MAC-Port Binding Setting features of the device.
impbSettingEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1
An entry appears in IP-MAC-Port Binding Setting table for each interface
in the system.
Indexes
impbPortIndex
Column Syntax OID
impbPortIndex
Specifies the port numbers through which the authorized manager can
access the switch.
By default the authorized manager is allowed to access the switch
through all the ports.
If a set of ports are configured in the '…
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.1
impbPortState
Disable / enable IP-MAC-Port Binding admin state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.2
impbPortDHCPSnoopingState
Disable / enable IP-MAC-Port Binding DHCP snooping state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.4
impbPortArpInspectionState
Set IP-MAC-Port Binding ARP Inspection state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1strict
2loose
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.5
impbPortIpInspectionState
Set IP-MAC-Port Binding IP Inspection state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.6
impbPortAllowZeroIPState
Disable / enable IP-MAC-Port Binding Allow-Zero-IP state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.7
impbPortForwardDHCPPktState
Disable / enable IP-MAC-Port Binding Forward-DHCP-Packet state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.8
impbPortDHCPMaxEntryIPv4
Set the maximum number of IPv4 entries that can be learned for the interface.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.9
impbPortDHCPMaxEntryIPv6
Set the maximum number of IPv6 entries that can be learned for the interface.
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.10
impbPortNDInspectionState
Set IP-MAC-Port Binding ND Inspection state for the interface.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.11
impbPortProtocolState
Set IP-MAC-Port Binding protocol state for the interface.
Enumerationr/w
Enumerated Values:
0ipv4
1ipv6
2all
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.12
impbPortDHCPv4SetVlanList
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.13
impbPortDHCPv4VlanList1k
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.14
impbPortDHCPv4VlanList2k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.

For each V…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.15
impbPortDHCPv4VlanList3k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.

For each V…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.16
impbPortDHCPv4VlanList4k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4094.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.

For each V…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.17
impbPortDHCPv6SetVlanList
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetStringr/w
Constraints:
range: 0-512
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.18
impbPortDHCPv6VlanList1k
A string of octets containing one bit per VLAN. The
first octet corresponds to VLANs with VlanIndex values
1 through 8; the second octet to VLANs 9 through
16 etc. The most significant bit of each octet
corresponds to …
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.19
impbPortDHCPv6VlanList2k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 1025 through 2048.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.

For each V…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.20
impbPortDHCPv6VlanList3k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 2049 through 3072.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.

For each V…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.21
impbPortDHCPv6VlanList4k
A string of octets containing one bit per VLAN for
VLANS with VlanIndex values 3073 through 4094.
The most significant bit of each
octet corresponds to the lowest VlanIndex value in that
octet.

For each V…
OctetString
Constraints:
range: 0-128
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.22
impbPortDHCPSnoopingFlushState
Disable / enable IP-MAC-Port Binding DHCP snooping flush when port down.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.1.1.23

impbAutoScanTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.10.2 · 1 row entry · 5 columns
Open in standard view 
A table to control auto scan features of the device.
impbAutoScanEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.10.2.1
An entry appears in auto scan table for each interface
in the system.
Indexes
impbAutoScanMacAddress impbAutoScanPort impbAutoScanIpAddress
Column Syntax OID
impbAutoScanMacAddress
The MAC address associated of the auto scan entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.10.2.1.1
impbAutoScanPort
The port number of the auto scan entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.14.10.2.1.2
impbAutoScanIpAddress
The IP address associated of the auto scan entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.14.10.2.1.3
impbAutoScanVlanId
The VLAN ID of the auto scan entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.10.2.1.4
impbAutoScanBinding
Disable / enable IP-MAC-Port Binding for the entry.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.14.10.2.1.5

impbBindingListTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.10.3 · 1 row entry · 4 columns
Open in standard view 
A table to control Manual IP-MAC-Port Binding white list features of the device.
impbBindingListEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.10.3.1
An entry appears in Manual IP-MAC-Port Binding white list table for each interface
in the system.
Indexes
impbBindingListIpAddress impbBindingListMacAddress
Column Syntax OID
impbBindingListIpAddress
The IP address associated of the Manual IP-MAC-PORT Binding white list entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.14.10.3.1.1
impbBindingListMacAddress
The MAC address associated of the Manual IP-MAC-PORT Binding white list entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.10.3.1.2
impbBindingListPort
The port number of the Manual IP-MAC-PORT Binding white list entry.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.10.3.1.3
impbBindingListRowStatus
The status of a row in impbBindingListTable. By setting this object, new
entries can be created in impbBindingListTable and existing entries can be
removed from impbBindingListTable. It can be used as specified in the S…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.10.3.1.4

impbBlockListTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.10.4 · 1 row entry · 5 columns
Open in standard view 
A table to control IP-MAC-Port Binding black list of the device.
impbBlockListEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.10.4.1
An entry appears in Manual IP-MAC-Port Binding black list table for each interface
in the system.
Indexes
impbBlockListMacAddress impbBlockListVlanId impbBlockListPort
Column Syntax OID
impbBlockListMacAddress
The MAC address associated of the IP-MAC-PORT Binding black list entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.10.4.1.1
impbBlockListVlanId
The VLAN ID of the IP-MAC-PORT Binding black list entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.14.10.4.1.2
impbBlockListPort
The port number of the IP-MAC-PORT Binding black list entry.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.14.10.4.1.3
impbBlockListIpAddress
The IP address associated of the IP-MAC-PORT Binding black list entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.14.10.4.1.4
impbBlockListStatus
nothing/delete IP-MAC-Port Binding for the interface.
Enumerationr/w
Enumerated Values:
0nothing
1deleted
 .1.3.6.1.4.1.171.10.75.15.2.14.10.4.1.5

impbDhcpSnoopingTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.10.8 · 1 row entry · 5 columns
Open in standard view 
A table to display DHCP snooping entries of the device.
impbDhcpSnoopingEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.10.8.1
An entry appears in DHCP snooping table for each interface
in the system.
Indexes
impbDhcpSnoopingMacAddress impbDhcpSnoopingIpAddress
Column Syntax OID
impbDhcpSnoopingMacAddress
The MAC address associated of the DHCP snooping entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.14.10.8.1.1
impbDhcpSnoopingIpAddress
The IP address associated of the DHCP snooping entry.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.14.10.8.1.2
impbDhcpSnoopingLeaseTime
The lease time associated of the DHCP snooping entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.10.8.1.3
impbDhcpSnoopingPort
The port number associated of the DHCP snooping entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.10.8.1.4
impbDhcpSnoopingremainingTime
The remaining time associated of the DHCP snooping entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.14.10.8.1.5

aacServerGroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.11.5 · 1 row entry · 4 columns
Open in standard view 
A table that contains informations about server group.
aacServerGroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.11.5.1
A list of the group including servers.
Indexes
aacServerGroupIndex
Column Syntax OID
aacServerGroupIndex
A value that uniquely identifies this SwAACServerGroupEntry .
Integer32
Constraints:
range: 2-9
 .1.3.6.1.4.1.171.10.75.15.2.14.11.5.1.1
aacServerGroupName
A human-readable text string of the method group.
The name is writable only if Group is new created,
which the value of aacServerGroupRowStatus is 'notReady'.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.14.11.5.1.2
aacServersInGroup
The list of servers in the group, each bit indicates a specified server ID.
The server must be created before including it.
Bitsr/w
Enumerated Values:
0id1
1id2
2id3
3id4
4id5
5id6
6id7
7id8
8id9
9id10
10id11
11id12
12id13
13id14
14id15
15id16
 .1.3.6.1.4.1.171.10.75.15.2.14.11.5.1.3
aacServerGroupRowStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.11.5.1.4

iPv4aacServerInfoTable

table obsolete
.1.3.6.1.4.1.171.10.75.15.2.14.11.6 · 1 row entry · 8 columns
Open in standard view 
A table that contains information about severs.
iPv4aacServerInfoEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1
A list of the information of server .
Indexes
iPv4aacServerIndex
Column Syntax OID
iPv4aacServerIndex obsolete
A value that uniquely identifies this SwAACServerGroupEntry.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.1
iPv4aacServerIPAddr obsolete
The IP address of Server
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.2
iPv4aacServerAuthProtocol obsolete
The authentication protocol provided by the Server.
Enumerationr/w
Enumerated Values:
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.3
iPv4aacServerAuthPort obsolete
The TCP/IP port .
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.4
iPv4aacServerAuthKey obsolete
The key used while authentication process.
OctetStringr/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.5
iPv4aacServerTimeout obsolete
Server response timeout .
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.6
iPv4aacServerRetryCount obsolete
Client retry count .
(-1: No retry mechanism)
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.7
iPv4aacServerRowStatus obsolete
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.11.6.1.8

aacServerInfoTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.11.7 · 1 row entry · 11 columns
Open in standard view 
A table that contains information about severs.
aacServerInfoEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1
A list of the information of server .
Indexes
aacServerIndex
Column Syntax OID
aacServerIndex
A value that uniquely identifies this SwAACServerGroupEntry.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.1
aacServerIPType
The IP address of the AAC server IP type
referred to in this table entry. (IPv4=1, IPv6=2)
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.2
aacServerIPAddr
The IP address of Server
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.3
aacServerInterfaceName
Specifies the interface name when the aacServerIPAddr is linklocal address.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.4
aacServerAuthProtocol
The authentication protocol provided by the Server.
Enumerationr/w
Enumerated Values:
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.5
aacServerAuthPort
The TCP/IP port .
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.6
aacServerAuthKey
The key used while authentication process.
OctetStringr/w
Constraints:
range: 1-254
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.7
aacServerTimeout
Server response timeout .
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.8
aacServerRetryCount
Client retry count .
(-1: No retry mechanism)
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.9
aacServerAccountingPort
The accounting port .
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.10
aacServerRowStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.11.7.1.99

aacLoginMethodListTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.11.8 · 1 row entry · 7 columns
Open in standard view 
A table that contains information about Login authentication method
lists.
aacLoginMethodListEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1
A list of the Authentication methods.
Indexes
aacLoginMethodListIndex
Column Syntax OID
aacLoginMethodListIndex
A value that identifies this method list.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.1
aacLoginMethodListName
A human-readable text string of the method list.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.2
aacLoginMethod1
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.3
aacLoginMethod2
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.4
aacLoginMethod3
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.5
aacLoginMethod4
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.6
aacLoginMethodListRowStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.11.8.1.7

aacEnableMethodListTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.11.9 · 1 row entry · 7 columns
Open in standard view 
A table that contains information about Enable authentication method
lists.
aacEnableMethodListEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1
A list of the Authentication methods.
Indexes
aacEnableMethodListIndex
Column Syntax OID
aacEnableMethodListIndex
A value that identifies this method list.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.1
aacEnableMethodListName
A human-readable text string of the method list.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.2
aacEnableMethod1
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.3
aacEnableMethod2
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.4
aacEnableMethod3
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.5
aacEnableMethod4
The type of Login method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.6
aacEnableMethodListRowStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.11.9.1.7

aacAccountingMethodListTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.11.11 · 1 row entry · 7 columns
Open in standard view 
A table that contains information about Accounting authentication method
lists.
aacAccountingMethodListEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1
A list of the Authentication methods.
Indexes
aacAccountingMethodListIndex
Column Syntax OID
aacAccountingMethodListIndex
A value that identifies this method list.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.1
aacAccountingMethodListName
A human-readable text string of the method list.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.2
aacAccountingMethod1
The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.3
aacAccountingMethod2
The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.4
aacAccountingMethod3
The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.5
aacAccountingMethod4
The type of Accounting method list. Besides the pre-defined type, it
also allow to be set user-defined group by aacServerGroupIndex.
Enumerationr/w
Enumerated Values:
-1none
0local
1tacacsPlus
2radius
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.6
aacAccountingMethodListRowStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.11.11.1.7

filterDHCPv6ServerTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.12.4 · 1 row entry · 3 columns
Open in standard view 
A table to control filter DHCPv6 Server for the entire
switch or for each interface in the switch.
filterDHCPv6ServerEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.12.4.1
An entry appears in this table for each interface
in the system.
Indexes
filterDHCPv6ServerIpAddr
Column Syntax OID
filterDHCPv6ServerIpAddr
Specifies either the Network or Host address from which the switch
can be managed.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.14.12.4.1.1
filterDHCPv6ServerPortList
Specifies the port numbers through which the authorized manager can
access the switch.

By default the authorized manager is allowed to access the switch
through all the ports.

If a set of p…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.14.12.4.1.2
filterDHCPv6ServerRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.12.4.1.99

filterICMPv6RaAllNodeTable

table
.1.3.6.1.4.1.171.10.75.15.2.14.13.4 · 1 row entry · 3 columns
Open in standard view 
A table to control filter ICMPv6 RA for the entire
switch or for each interface in the switch.
filterICMPv6RaAllNodeEntry entry .1.3.6.1.4.1.171.10.75.15.2.14.13.4.1
An entry appears in this table for each interface
in the system.
Indexes
filterICMPv6RaAllNodeServerIpAddr
Column Syntax OID
filterICMPv6RaAllNodeServerIpAddr
Specifies either the Network or Host address from which the switch
can be managed.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.14.13.4.1.1
filterICMPv6RaAllNodeServerPortList
Specifies the port numbers through which the authorized manager can
access the switch.

By default the authorized manager is allowed to access the switch
through all the ports.

If a set of p…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.14.13.4.1.2
filterICMPv6RaAllNodeServerRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.14.13.4.1.99

ipv4aclProfileTable

table obsolete
.1.3.6.1.4.1.171.10.75.15.2.15.1.1 · 1 row entry · 30 columns
Open in standard view 
A table to ACL profile .
ipv4aclProfileEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1
Each entry in this table is a ACL profile.
Index to the table is ACL profile ID.
Indexes
ipv4aclProfileNo
Column Syntax OID
ipv4aclProfileNo obsolete
The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.1
ipv4aclProfileType obsolete
The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
voiceVlan(6) - for Voice VLAN OUI entry.
userDefined(9) - for User Defined entry.
Note that only l2, l3 and userDefine…
Enumerationr/w
Enumerated Values:
1l2
2l3
3impb
8aclQos
9userDefined
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.2
ipv4aclProfileRuleCount obsolete
The number of rules in this profile.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.3
ipv4aclProfileMask obsolete
Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC …
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.4
ipv4aclProfileDstMacAddrMask obsolete
The ACL Profile destination MAC address mask.
If DST_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.5
ipv4aclProfileSrcMacAddrMask obsolete
The ACL Profile source MAC address mask.
If SRC_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.6
ipv4aclProfileIPProtocol obsolete
Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
Enumerationr/w
Enumerated Values:
0none
1icmp
2igmp
6tcp
17udp
58icmpv6
255ipProtocolMask
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.7
ipv4aclProfileIPProtocolMask obsolete
The ACL Profile IP protocol mask.
If aclProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
T…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.8
ipv4aclProfileDstIpAddrMask obsolete
The ACL Profile destination IP address mask.
If DST_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in …
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.9
ipv4aclProfileSrcIpAddrMask obsolete
The ACL Profile source IP address mask.
If SRC_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX f…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.10
ipv4aclProfileDstPortMask obsolete
The ACL Profile UDP/TCP destination port mask.
If DST_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
Th…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.11
ipv4aclProfileSrcPortMask obsolete
The ACL Profile UDP/TCP source port mask.
If SRC_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.12
ipv4aclProfileUdfOffsetMap obsolete
Indicate which Udf field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
UDF Offset…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.15
ipv4aclUdfOffsetBase1 obsolete
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.16
ipv4aclUdfOffsetByte1 obsolete
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.17
ipv4aclUdfOffsetMask1 obsolete
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.18
ipv4aclUdfOffsetBase2 obsolete
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.19
ipv4aclUdfOffsetByte2 obsolete
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.20
ipv4aclUdfOffsetMask2 obsolete
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.21
ipv4aclUdfOffsetBase3 obsolete
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.22
ipv4aclUdfOffsetByte3 obsolete
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.23
ipv4aclUdfOffsetMask3 obsolete
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.24
ipv4aclUdfOffsetBase4 obsolete
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.25
ipv4aclUdfOffsetByte4 obsolete
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.26
ipv4aclUdfOffsetMask4 obsolete
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.27
ipv4aclUdfDstMacMask obsolete
The value of destination MAC mask.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.28
ipv4aclUdfSrcMacMask obsolete
The value of source MAC mask.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.29
ipv4aclUdfCTagMask obsolete
The value of c-tag mask.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.30
ipv4aclUdfSTagMask obsolete
The value of s-tag mask.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.31
ipv4aclProfileStatus obsolete
This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.1.1.1.32

aclProfileTable

table
.1.3.6.1.4.1.171.10.75.15.2.15.1.2 · 1 row entry · 32 columns
Open in standard view 
A table to ACL profile .
aclProfileEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1
Each entry in this table is a ACL profile.
Index to the table is ACL profile ID.
Indexes
aclProfileNo
Column Syntax OID
aclProfileNo
The ACL Profile ID. The ID 1 to 50 is user-defined ACL,
and the ID more than 50 is reserved for system-defined ACL.
The user only allow to create user-defined ACL ID.
And system-defined ACL is read only.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.1
aclProfileType
The ACL Profile type, possible value are
l2 (1) - for MAC-based rule,
l3v4 (2) - for IPv4-based rule,
l3v6 (11) - for IPv6-based rule,
voiceVlan(6) - for Voice VLAN OUI entry.
userDefined(9) - for User De…
Enumerationr/w
Enumerated Values:
1l2
2l3v4
3impb
8aclQos
9userDefined
11l3v6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.2
aclProfileRuleCount
The number of rules in this profile.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.3
aclProfileMask
Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC …
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.4
aclProfileDstMacAddrMask
The ACL Profile destination MAC address mask.
If DST_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleDstMacAddr,
to caculate a range of MAC address which is really care.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.5
aclProfileSrcMacAddrMask
The ACL Profile source MAC address mask.
If SRC_MAC is turn on in aclProfileMask,
it will work with its member rule field,aclL2RuleSrcMacAddr,
to caculate a range of MAC address which is really care.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.6
aclProfileIPProtocol
Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
Enumerationr/w
Enumerated Values:
0none
1icmp
2igmp
6tcp
17udp
58icmpv6
255ipProtocolMask
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.7
aclProfileIPProtocolMask
The ACL Profile IP protocol mask.
If aclProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
T…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.8
aclProfileDstIpAddrMaskType
IPv6 Address type.
Enumerationr/w
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.9
aclProfileDstIpAddrMask
The ACL Profile destination IP address mask.
If DST_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleDstIpAddr,
to caculate a range of IP address which is really care.
The value is in …
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.10
aclProfileSrcIpAddrMaskType
IPv6 Address type.
Enumerationr/w
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.11
aclProfileSrcIpAddrMask
The ACL Profile source IP address mask.
If SRC_IP is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleSrcIpAddr,
to caculate a range of IP address which is really care.
The value is in HEX f…
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.12
aclProfileDstPortMask
The ACL Profile UDP/TCP destination port mask.
If DST_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpDstPort,
to caculate a range of destination port which is really care.
Th…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.13
aclProfileSrcPortMask
The ACL Profile UDP/TCP source port mask.
If SRC_PORT is turn on in aclProfileMask,
it will work with its member rule field,aclL3RuleTcpUdpSrcPort,
to caculate a range of source port which is really care.
The value is…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.14
aclProfileUdfOffsetMap
Indicate which Udf field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
UDF Offset…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.17
aclUdfOffsetBase1
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.18
aclUdfOffsetByte1
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.19
aclUdfOffsetMask1
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.20
aclUdfOffsetBase2
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.21
aclUdfOffsetByte2
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.22
aclUdfOffsetMask2
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.23
aclUdfOffsetBase3
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.24
aclUdfOffsetByte3
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.25
aclUdfOffsetMask3
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.26
aclUdfOffsetBase4
The value of offset Base.
Enumerationr/w
Enumerated Values:
0l2
2l3
3l4
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.27
aclUdfOffsetByte4
The value of offset Byte from base.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.28
aclUdfOffsetMask4
The value of offset MAsk.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.29
aclUdfDstMacMask
The value of destination MAC mask.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.30
aclUdfSrcMacMask
The value of source MAC mask.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.31
aclUdfCTagMask
The value of c-tag mask.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.32
aclUdfSTagMask
The value of s-tag mask.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.33
aclProfileStatus
This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.1.2.1.34

aclL2RuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.15.2.1 · 1 row entry · 19 columns
Open in standard view 
A table to configure L2 filter rules in the system.
aclL2RuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1
Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID.
Indexes
aclL2ProfileID aclL2AccessID
Column Syntax OID
aclL2AccessID
L2 Filter rule ID. 0 means auto assign.
Integer32
Constraints:
range: 0-250
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.1
aclL2ProfileID
ACL Profile ID which this rule join.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.2
aclL2RuleEtherType
The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition.
Integer32r/w
Constraints:
range: -1--1
range: 1501-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.3
aclL2RuleDstMacAddr
Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.4
aclL2RuleSrcMacAddr
Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.5
aclL2RuleVlanId
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.6
aclL2Rule1pPriority
802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.7
aclL2RuleDstMacAddrMask
The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.8
aclL2RuleSrcMacAddrMask
The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.9
aclL2RuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded.
Enumerationr/w
Enumerated Values:
1allow
2drop
3mirror
5replaceDSCP
6replace1P
7replaceQueue
8replaceVLAN
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.11
aclL2RuleRateLimit
Rate limit for matched packet.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.12
aclL2RuleReplaceDSCP
Replace DSCP for matched packet.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.13
aclL2RuleReplace1P
Replace DSCP for matched packet.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.14
aclL2RuleReplaceQueue
ACL L2 Rule Replace Queue.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.15
aclL2RuleReplaceVLAN
Replace VLAN for matched packet.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.16
aclL2RuleFilterTimeRange
ACL L2 Filter Time Range
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.17
aclL2RuleVlanIdMask
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.18
aclL2RuleInPortList
Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.51
aclL2RuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.99

aclL3RuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.15.3.1 · 1 row entry · 32 columns
Open in standard view 
A table to configure L3 filter rules in the system.
aclL3RuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1
Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.
Indexes
aclL3RuleProfileNo aclL3RuleAccessID
Column Syntax OID
aclL3RuleAccessID
L3 Filter rule ID. 0 means auto assign.
Integer32
Constraints:
range: 0-250
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.1
aclL3RuleProfileNo
The Profile ID which this rule join.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.2
aclL3RuleProtocol
The type of protocol to be checked against the packet.
Enumerationr/w
Enumerated Values:
1icmp
2igmp
6tcp
17udp
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.3
aclL3RuleProtocolMask
The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
OctetString .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.4
aclL3RuleICMPMessageType
The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.5
aclL3RuleICMPMessageCode
The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which mean…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.6
aclL3RuleDstIpAddr
Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.7
aclL3RuleSrcIpAddr
Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.8
aclL3RuleDstIpAddrMask
The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.9
aclL3RuleSrcIpAddrMask
The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.10
aclL3RuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.11
aclL3RuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.12
aclL3RuleTcpUdpDstPortMask
The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.13
aclL3RuleTcpUdpSrcPortMask
The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.14
aclL3RuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.15
aclL3RuleTcpRstBit
The TCP RST bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.16
aclL3RuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.17
aclL3RuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(-1). which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.18
aclL3RuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.19
aclL3RuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.20
aclL3RuleDscp
The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.21
aclL3RuleTos
The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.22
aclL3RuleIgmpType
The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.23
aclL3RuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
Enumerationr/w
Enumerated Values:
1allow
2drop
3mirror
5replaceDSCP
6replace1P
7replaceQueue
8replaceVLAN
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.25
aclL3RuleRateLimit
Rate limit for matched packet.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.26
aclL3RuleReplaceDSCP
ReplaceDSCP for matched packet.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.27
aclL3RuleReplace1P
ReplaceDSCP for matched packet.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.28
aclL3RuleReplaceQueue
Acl L3 Rule Replace Queue.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.29
aclL3RuleReplaceVLAN
ReplaceVLAN for matched packet.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.30
aclL3RuleFilterTimeRange
ACL L3 Filter Time Range
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.31
aclL3RulePortList
Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.51
aclL3RuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.3.1.1.99

aclv6L3RuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.15.3.2 · 1 row entry · 30 columns
Open in standard view 
A table to configure L3 filter rules in the system.
aclv6L3RuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1
Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.
Indexes
aclv6L3RuleProfileNo aclv6L3RuleAccessID
Column Syntax OID
aclv6L3RuleAccessID
L3 Filter rule ID. 0 means auto assign.
Integer32
Constraints:
range: 0-250
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.1
aclv6L3RuleProfileNo
The Profile ID which this rule join.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.2
aclv6L3RuleProtocol
The type of protocol to be checked against the packet.
Enumerationr/w
Enumerated Values:
6tcp
17udp
58icmpv6
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.3
aclv6L3RuleProtocolMask
The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,aclL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX format.
OctetString .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.4
aclv6L3RuleICMPMessageType
The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1',which means…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.5
aclv6L3RuleICMPMessageCode
The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in aclL3RuleAction.
The default value is '-1', which mean…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.6
aclv6L3RuleDstIpAddr
Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.7
aclv6L3RuleSrcIpAddr
Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.8
aclv6L3RuleDstIpAddrMask
The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.9
aclv6L3RuleSrcIpAddrMask
The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.10
aclv6L3RuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.11
aclv6L3RuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.12
aclv6L3RuleTcpUdpDstPortMask
The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.13
aclv6L3RuleTcpUdpSrcPortMask
The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.14
aclv6L3RuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.15
aclv6L3RuleTcpRstBit
The TCP RST bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.16
aclv6L3RuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.17
aclv6L3RuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default
value is 'dont_care'(-1). which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.18
aclv6L3RuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.19
aclv6L3RuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default
value is 'dont_care'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dont-care
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.20
aclv6L3RuleTrafficClass
The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.21
aclv6L3RuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
Enumerationr/w
Enumerated Values:
1allow
2drop
3mirror
5replaceDSCP
6replace1P
7replaceQueue
8replaceVLAN
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.24
aclv6L3RuleRateLimit
Rate limit for matched packet.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.25
aclv6L3RuleReplaceDSCP
Replace DSCP for matched packet.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.26
aclv6L3RuleReplace1P
Replace DSCP for matched packet.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.27
aclv6L3RuleReplaceQueue
Acl IPV6 L3 Rule Replace Queue.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.28
aclv6L3RuleReplaceVLAN
Replace VLAN for matched packet.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.29
aclv6L3RuleFilterTimeRange
ACL IPV6 L3 Filter Time Range
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.30
aclv6L3RulePortList
Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.51
aclv6L3RuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.3.2.1.99

aclPacketRuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.15.4.1 · 1 row entry · 27 columns
Open in standard view 
A table to configure Packet Content filter rules in the system.
aclPacketRuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1
Each entry in this table is a Packet filter rule.
Index to the table is the Packet filter number and Profile ID.
Indexes
aclPacketProfileID aclPacketAccessID
Column Syntax OID
aclPacketAccessID
Packet Filter rule ID. 0 means auto assign.
Integer32
Constraints:
range: 0-250
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.1
aclPacketProfileID
ACL Profile ID which this rule join.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.2
aclPacketRuleOffsetValue1
The filter value of Offset 1.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.3
aclPacketRuleOffsetValue2
The filter value of Offset 2.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.4
aclPacketRuleOffsetValue3
The filter value of Offset 3.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.5
aclPacketRuleOffsetValue4
The filter value of Offset 4.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.6
aclPacketRuleDstMac
The filter value of Destination MAC.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.7
aclPacketRuleDstMacMask
The filter mask of Destination MAC.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.8
aclPacketRuleSrcMac
The filter value of Source MAC.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.9
aclPacketRuleSrcMacMask
The filter mask of Source MAC.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.10
aclPacketRuleCTag
The filter value of c-tag.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.11
aclPacketRuleCTagMask
The filter mask of c-tag.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.12
aclPacketRuleSTag
The filter value of s-tag.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.13
aclPacketRuleSTagMask
The filter mask of s-tag.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.14
aclPacketRuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded.
Enumerationr/w
Enumerated Values:
1allow
2drop
3mirror
5replaceDSCP
6replace1P
7replaceQueue
8replaceVLAN
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.15
aclPacketRuleRateLimit
Rate limit for matched packet.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.16
aclPacketRuleReplaceDSCP
Replace DSCP for matched packet.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.17
aclPacketRuleReplace1P
Replace 1p for matched packet.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.18
aclPacketRuleReplaceQueue
Acl Rule Replace Queue.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.19
aclPacketRuleReplaceVLAN
Replace VLAN for matched packet.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.20
aclPacketRuleFilterTimeRange
Acl Filter Time Range
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.21
aclPacketRuleInPortList
Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.51
aclPacketRuleOffsetValue1Mask
The filter Mask of Offset 1.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.52
aclPacketRuleOffsetValue2Mask
The filter Mask of Offset 2.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.53
aclPacketRuleOffsetValue3Mask
The filter Mask of Offset 3.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.54
aclPacketRuleOffsetValue4Mask
The filter Mask of Offset 4.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.55
aclPacketRuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.4.1.1.99

aclFlowMeterTable

table
.1.3.6.1.4.1.171.10.75.15.2.15.10.1 · 1 row entry · 7 columns
Open in standard view 
A table to configure L2 filter rules in the system.
aclFlowMeterEntry entry .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1
Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID.
Indexes
aclFlowMeterProfileID aclFlowMeterAccessID
Column Syntax OID
aclFlowMeterProfileID
ACL Profile ID which this flow meter join.
Integer32
Constraints:
range: 1-50
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.1
aclFlowMeterAccessID
ACL Access ID which this flow meter join.
Integer32
Constraints:
range: 1-250
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.2
aclFlowMeterRate
The rate limiter of meter.
Integer32r/w
Constraints:
range: 64-1024000
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.3
aclFlowMeterBurstSize
The burst size of meter.
Integer32r/w
Constraints:
range: 0-1016
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.4
aclFlowMeterReplaceDscp
Replace DSCP for matched out-band packets when aclFlowMeterAction is replace DSCP.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.5
aclFlowMeterAction
Specifies the action to be taken on the out-band packet if the filter
rule matches.
If the action is 'drop', the packet will be discarded.
Enumerationr/w
Enumerated Values:
2drop
5replaceDSCP
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.6
aclFlowMeterStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.15.10.1.1.99

ipv4syslogServTable

table
.1.3.6.1.4.1.171.10.75.15.2.16.2.1 · 1 row entry · 7 columns
Open in standard view 
The table of syslog remote server.
ipv4syslogServEntry entry .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1
The list of syslog remote server entry.
Indexes
ipv4syslogServIndex
Column Syntax OID
ipv4syslogServIndex
The index of syslog remote server.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.1
ipv4syslogServAddr
The IP Address of syslog remote server.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.2
ipv4syslogServSeverity
Specifies the log level option to be set for a specific server.
Enumerationr/w
Enumerated Values:
4warning
6information
7all
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.3
ipv4syslogServFacility
The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server.
Enumerationr/w
Enumerated Values:
128local0
136local1
144local2
152local3
160local4
168local5
176local6
184local7
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.4
ipv4syslogServUDPport
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 514-514
range: 6000-65535
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.5
ipv4syslogServSrvStatus
The status for this server. If enable, system will send message to
this server.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.6
ipv4syslogServSrvRowStatus
Row status of this server entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.16.2.1.1.7

syslogServTable

table
.1.3.6.1.4.1.171.10.75.15.2.16.3.1 · 1 row entry · 9 columns
Open in standard view 
The table of syslog remote server.
syslogServEntry entry .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1
The list of syslog remote server entry.
Indexes
syslogServIndex
Column Syntax OID
syslogServIndex
The index of syslog remote server.
Integer32
Constraints:
range: 1-4
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.1
syslogServAddrType
Specifies the Address type of server.Address type shall be ipv4 or ipv6.
Enumerationr/w
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.2
syslogServAddr
Specifies the ServerIP to which the syslog shall be forwarded.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.3
syslogServInterfaceName
Specifies the interface name when the syslogServInterfaceName is linklocal address.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.4
syslogServSeverity
Specifies the log level option to be set for a specific server.
Enumerationr/w
Enumerated Values:
4warning
6information
7all
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.5
syslogServFacility
The Syslog standard facilities.
The facility to be used when sending Syslog messages to this server.
Enumerationr/w
Enumerated Values:
128local0
136local1
144local2
152local3
160local4
168local5
176local6
184local7
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.6
syslogServUDPport
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 514-514
range: 6000-65535
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.7
syslogServSrvStatus
The status for this server. If enable, system will send message to
this server.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.8
syslogServSrvRowStatus
Row status of this server entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.16.3.1.1.9

syslogModuleLogTable

table
.1.3.6.1.4.1.171.10.75.15.2.16.4.1 · 1 row entry · 2 columns
Open in standard view 
A table that holds the module log state setting.
syslogModuleLogEntry entry .1.3.6.1.4.1.171.10.75.15.2.16.4.1.1
A list of module log state settings of the device.
Indexes
syslogModuleLogType
Column Syntax OID
syslogModuleLogType
This object indicates the module log type.
Enumeration
Enumerated Values:
1igmp
2stp
3impb
 .1.3.6.1.4.1.171.10.75.15.2.16.4.1.1.1
syslogModuleLogState
This object is for enabling or disabling module log state.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.16.4.1.1.2

sysLBDCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.17.5 · 1 row entry · 3 columns
Open in standard view 
A table to control Loopback detection features either for 
the entire switch or for each interface in the switch.
sysLBDCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.17.5.1
An entry appears in this table for each interface
in the system.
Indexes
sysLBDCtrlIndex
Column Syntax OID
sysLBDCtrlIndex
The interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.17.5.1.1
sysLBDPortStatus
Provides control to per port enable or disable the loopback detection
function. Default is disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.17.5.1.2
sysLBDPortLoopStatus
The loop status for this port.
Enumeration
Enumerated Values:
1normal
2loop
 .1.3.6.1.4.1.171.10.75.15.2.17.5.1.3

sysLBDVlanLoopTable

table
.1.3.6.1.4.1.171.10.75.15.2.17.6 · 1 row entry · 2 columns
Open in standard view 
A table to display Loopback detection features by vlan
mode .
sysLBDVlanLoopEntry entry .1.3.6.1.4.1.171.10.75.15.2.17.6.1
An entry appears in this table for each interface
in the system.
Indexes
sysLBDVlanLoopIndex
Column Syntax OID
sysLBDVlanLoopIndex
Display port lists loop status by vlan.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.17.6.1.1
sysLBDVlanLoopPorts
Display port lists loop status by vlan.
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.17.6.1.2

staticMcastTable

table
.1.3.6.1.4.1.171.10.75.15.2.19.1 · 1 row entry · 5 columns
Open in standard view 
A list of the Static MACs
staticMcastEntry entry .1.3.6.1.4.1.171.10.75.15.2.19.1.1
A Static MAC entry containing the mac and forwarding port.
Indexes
staticMcastVlanID staticMcastMac staticMcastEgressPorts staticMcastIpAddr
Column Syntax OID
staticMcastVlanID
The VLAN ID of the static MAC entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.19.1.1.1
staticMcastMac
The MAC address associated of the static MAC entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.19.1.1.2
staticMcastEgressPorts
The set of ports to which frames received from a
specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not
be a…
OctetString
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.19.1.1.3
staticMcastIpAddr
Static Multicast IP Address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.19.1.1.4
staticMcastStatus
The status of an entry in the Static Mcast Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.19.1.1.5

rmonStatsTable

table
.1.3.6.1.4.1.171.10.75.15.2.22.2.1 · 1 row entry · 4 columns
Open in standard view 
A list of Ethernet statistics entries.
rmonStatsEntry entry .1.3.6.1.4.1.171.10.75.15.2.22.2.1.1
A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherStatsPkts object might be named etherStatsPkts.1
Indexes
rmonStatsIndex
Column Syntax OID
rmonStatsIndex
The value of this object uniquely identifies this
etherStats entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.2.1.1.1
rmonStatsDataSource
This object identifies the source of the data that
this etherStats entry is configured to analyze. This
source can be any ethernet interface on this device.
In order to identify a particular interface, this object
shal…
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.75.15.2.22.2.1.1.2
rmonStatsOwner
The entity that configured this entry and is therefore
using the resources assigned to it.
OwnerStringr/w
Textual Convention: OwnerString OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.10.75.15.2.22.2.1.1.3
rmonStatsStatus
The status of this etherStats entry.
RmonStatusr/w
Textual Convention: RmonStatus Enumeration
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.171.10.75.15.2.22.2.1.1.4

rmonHistoryTable

table
.1.3.6.1.4.1.171.10.75.15.2.22.3.1 · 1 row entry · 6 columns
Open in standard view 
A list of history control entries.
rmonHistoryEntry entry .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1
A list of parameters that set up a periodic sampling of
statistics. As an example, an instance of the
historyControlInterval object might be named
historyControlInterval.2
Indexes
rmonHistoryIndex
Column Syntax OID
rmonHistoryIndex
An index that uniquely identifies an entry in the
historyControl table. Each such entry defines a
set of samples at a particular interval for an
interface on the device.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1.1
rmonHistoryDataSource
This object identifies the source of the data for
which historical data was collected and
placed in a media-specific table on behalf of this
historyControlEntry. This source can be any
interface on this device. In ord…
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1.2
rmonHistoryBucketsRequested
The requested number of discrete time intervals
over which data is to be saved in the part of the
media-specific table associated with this
historyControlEntry.

When this object is created or modified, th…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1.3
rmonHistoryInterval
The interval in seconds over which the data is
sampled for each bucket in the part of the
media-specific table associated with this
historyControlEntry. This interval can
be set to any number of seconds between 1 and
3…
SecondsInteger32r/w
Constraints:
range: 1-3600
 .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1.4
rmonHistoryOwner
The entity that configured this entry and is therefore
using the resources assigned to it.
OwnerStringr/w
Textual Convention: OwnerString OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1.5
rmonHistoryStatus
The status of this historyControl entry.

Each instance of the media-specific table associated
with this historyControlEntry will be deleted by the agent
if this historyControlEntry is not equal to valid(1…
RmonStatusr/w
Textual Convention: RmonStatus Enumeration
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.171.10.75.15.2.22.3.1.1.6

rmonAlarmTable

table
.1.3.6.1.4.1.171.10.75.15.2.22.4.1 · 1 row entry · 10 columns
Open in standard view 
A list of alarm entries.
rmonAlarmEntry entry .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1
A list of parameters that set up a periodic checking
for alarm conditions. For example, an instance of the
alarmValue object might be named alarmValue.8
Indexes
rmonAlarmIndex
Column Syntax OID
rmonAlarmIndex
An index that uniquely identifies an entry in the
alarm table. Each such entry defines a
diagnostic sample at a particular interval
for an object on the device.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.1
rmonAlarmInterval
The interval in seconds over which the data is
sampled and compared with the rising and falling
thresholds. When setting this variable, care
should be taken in the case of deltaValue
sampling - the interval should be s…
SecondsSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.2
rmonAlarmVariable
The object identifier of the particular variable to be
sampled. Only variables that resolve to an ASN.1 primitive
type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
Gauge, or TimeTicks) may be sampled.
…
ObjectIdentifierr/w .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.3
rmonAlarmSampleType
The method of sampling the selected variable and
calculating the value to be compared against the
thresholds. If the value of this object is
absoluteValue(1), the value of the selected variable
will be compared directl…
Enumerationr/w
Enumerated Values:
1absoluteValue
2deltaValue
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.4
rmonAlarmRisingThreshold
A threshold for the sampled statistic. When the current
sampled value is greater than or equal to this threshold,
and the value at the last sampling interval was less than
this threshold, a single event will be generat…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.5
rmonAlarmFallingThreshold
A threshold for the sampled statistic. When the current
sampled value is less than or equal to this threshold,
and the value at the last sampling interval was greater than
this threshold, a single event will be generat…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.6
rmonAlarmRisingEventIndex
The index of the eventEntry that is
used when a rising threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If there…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.7
rmonAlarmFallingEventIndex
The index of the eventEntry that is
used when a falling threshold is crossed. The
eventEntry identified by a particular value of
this index is the same as identified by the same value
of the eventIndex object. If ther…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.8
rmonAlarmOwner
The entity that configured this entry and is therefore
using the resources assigned to it.
OwnerStringr/w
Textual Convention: OwnerString OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.9
rmonAlarmStatus
The status of this alarm entry.
RmonStatusr/w
Textual Convention: RmonStatus Enumeration
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.171.10.75.15.2.22.4.1.1.10

rmonEventTable

table
.1.3.6.1.4.1.171.10.75.15.2.22.5.1 · 1 row entry · 6 columns
Open in standard view 
A list of events to be generated.
rmonEventEntry entry .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1
A set of parameters that describe an event to be generated
when certain conditions are met. As an example, an instance
of the eventLastTimeSent object might be named
eventLastTimeSent.6
Indexes
rmonEventIndex
Column Syntax OID
rmonEventIndex
An index that uniquely identifies an entry in the
event table. Each such entry defines one event that
is to be generated when the appropriate conditions
occur.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1.1
rmonEventDescription
A comment describing this event entry.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1.2
rmonEventType
The type of notification that the probe will make
about this event. In the case of log, an entry is
made in the log table for each event. In the case of
snmp-trap, an SNMP trap is sent to one or more
management statio…
Enumerationr/w
Enumerated Values:
1none
2log
3snmptrap
4logandtrap
 .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1.3
rmonEventCommunity
If an SNMP trap is to be sent, it will be sent to
the SNMP community specified by this octet string.
OctetStringr/w
Constraints:
range: 0-127
 .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1.4
rmonEventOwner
The entity that configured this entry and is therefore
using the resources assigned to it.

If this object contains a string starting with 'monitor'
and has associated entries in the log table, all connect…
OwnerStringr/w
Textual Convention: OwnerString OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1.5
rmonEventStatus
The status of this event entry.

If this object is not equal to valid(1), all associated
log entries shall be deleted by the agent.
RmonStatusr/w
Textual Convention: RmonStatus Enumeration
Type Values:
1valid
2createRequest
3underCreation
4invalid
 .1.3.6.1.4.1.171.10.75.15.2.22.5.1.1.6

swAuthPortAccessControlTable

table
.1.3.6.1.4.1.171.10.75.15.2.23.2.1 · 1 row entry · 11 columns
Open in standard view 
A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself.
swAuthPortAccessControlEntry entry .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1
The configuration information for an Authenticator Port.
Indexes
swAuthAuthConfigPortNumber
Column Syntax OID
swAuthAuthConfigPortNumber
A unique value for each port that correlates to port index.
Its value ranges between 1 and the value of port number.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.1
swAuthAuthQuietPeriod
The value, in seconds, of the quietPeriod constant
currently in use by the Authenticator PAE state
machine.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.2
swAuthAuthSuppTimeout
The value, in seconds, of the suppTimeout constant
currently in use by the Backend Authentication state
machine.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.3
swAuthAuthServerTimeout
The value, in seconds, of the serverTimeout constant
currently in use by the Backend Authentication state
machine.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.4
swAuthAuthMaxReq
The value of the maxReq constant currently in use by
the Backend Authentication state machine.
Integer32r/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.5
swAuthAuthTxPeriod
The value, in seconds, of the txPeriod constant
currently in use by the Authenticator PAE state
machine.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.6
swAuthAuthReAuthPeriod
The value, in seconds, of the reAuthPeriod constant
currently in use by the Reauthentication Timer state
machine.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.7
swAuthAuthReAuthentication
The enable/disable control used by the Reauthentication
Timer state machine (8.5.5.1).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.8
swAuthAuthConfigPortControl
The current value of the controlled Port
control parameter for the Port.
Enumerationr/w
Enumerated Values:
1forceUnauthorized
2auto
3forceAuthorized
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.9
swAuthAuthCapability
The current value of the controlled Port
control parameter for the Port.
Enumerationr/w
Enumerated Values:
1authenticator
2none
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.10
swAuthAuthDirection
The current value of the controlled Port
control parameter for the Port.
Enumerationr/w
Enumerated Values:
0both
1in
 .1.3.6.1.4.1.171.10.75.15.2.23.2.1.1.11

swAuthUserTable

table
.1.3.6.1.4.1.171.10.75.15.2.23.3.1 · 1 row entry · 3 columns
Open in standard view 
A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself.
swAuthUserEntry entry .1.3.6.1.4.1.171.10.75.15.2.23.3.1.1
The configuration information for an Authenticator Port.
Indexes
swAuthUserName
Column Syntax OID
swAuthUserName
The unique index value of a row in this table.

This object is used to set 802.1X Local user name,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.
OctetString
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.23.3.1.1.1
swAuthUserPassword
This object is used to set 802.1X Local user Password,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.23.3.1.1.2
swAuthUserStatus
The status of this conceptual row in the swAuthUserTable.

An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through default …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.23.3.1.1.3

iPv4swAuthRadiusServerTable

table obsolete
.1.3.6.1.4.1.171.10.75.15.2.23.4.1 · 1 row entry · 8 columns
Open in standard view 
A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself.
iPv4swAuthRadiusServerEntry entry .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1
The configuration information for an Authenticator Port.
Indexes
iPv4swAuthRadiusServerIndex
Column Syntax OID
iPv4swAuthRadiusServerIndex obsolete
A unique value for Authentication RADIUS Server index.
Its value ranges between 1 and 3.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.1
iPv4swAuthRadiusServerAddress obsolete
The IP address of the RADIUS server
referred to in this table entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.2
iPv4swAuthRadiusServerAuthenticationPort obsolete
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.3
iPv4swAuthRadiusServerAccountingPort obsolete
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.4
iPv4swAuthRadiusServerTimeout obsolete
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.5
iPv4swAuthRadiusServerRetransmit obsolete
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.6
iPv4swAuthRadiusServerKey obsolete
This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.7
iPv4swAuthRadiusServerStatus obsolete
The status of this conceptual row in the
swAuthRadiusServerTable.

An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.23.4.1.1.8

swAuthRadiusServerTable

table
.1.3.6.1.4.1.171.10.75.15.2.23.4.2 · 1 row entry · 10 columns
Open in standard view 
A table that contains the configuration objects for the
Authenticator PAE associated with each port.
An entry appears in this table for each port that may
authenticate access to itself.
swAuthRadiusServerEntry entry .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1
The configuration information for an Authenticator Port.
Indexes
swAuthRadiusServerIndex
Column Syntax OID
swAuthRadiusServerIndex
A unique value for Authentication RADIUS Server index.
Its value ranges between 1 and 3.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.1
swAuthRadiusIPType
The IP address of the RADIUS server IP type
referred to in this table entry.
Integer32r/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.2
swAuthRadiusServerAddress
The IP address of the RADIUS server
referred to in this table entry.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.3
swAuthRadiusServerInterfaceName
Specifies the interface name when the swAuthRadiusServerAddress is linklocal address.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.4
swAuthRadiusServerAuthenticationPort
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.5
swAuthRadiusServerAccountingPort
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.6
swAuthRadiusServerTimeout
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.7
swAuthRadiusServerRetransmit
The value is for setting UDP Port.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.8
swAuthRadiusServerKey
This object is used to set 802.1X Radius Server Key,
The following characters are allowed to input:
semicolon, question mark, space, and double quotation mark.
OctetStringr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.9
swAuthRadiusServerStatus
The status of this conceptual row in the
swAuthRadiusServerTable.

An entry in this table is not qualified for activation
until instances of all corresponding columns have been
initialized, either through …
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.23.4.2.1.10

macNotifyCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.25.4 · 1 row entry · 2 columns
Open in standard view 
A table to control Loopback detection features either for 
the entire switch or for each interface in the switch.
macNotifyCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.25.4.1
An entry appears in this table for each interface
in the system.
Indexes
macNotifyCtrlIndex
Column Syntax OID
macNotifyCtrlIndex
The interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.25.4.1.1
macNotifyPortStatus
Provides control to per port enable or disable the loopback detection
function. Default is disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.25.4.1.2

igmpMulticastVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.27.2 · 1 row entry · 13 columns
Open in standard view 
Information about the IGMP snooping multicast VLAN table.
igmpMulticastVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.27.2.1
The entry of igmpMulticastVlanTable.
Indexes
igmpMulticastVlanid
Column Syntax OID
igmpMulticastVlanid
This object indicates the VLAN ID of the IGMP snooping multicast
VLAN entry.
Integer32
Constraints:
range: 2-4094
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.1
igmpMulticastVlanName
This object indicates the VLAN name of the IGMP snooping multicast
VLAN entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.2
igmpMulticastVlanSourcePort
This object indicates the port list of the source ports of the IGMP
snooping multicast VLAN. The source ports will be set as tag ports
of the VLAN entry and the IGMP control messages received from the
member ports wil…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.3
igmpMulticastVlanMemberPort
This object indicates the port list of the member ports of the IGMP
snooping multicast VLAN. The source ports will be set as untagged ports
of the VLAN entry and the IGMP control messages received from the
member port…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.4
igmpMulticastVlanTagMemberPort
This object indicates the port list of the tag member ports of the IGMP
snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.5
igmpMulticastVlanUntaggedSourcePort
This object indicates the port list of the untag source ports of the IGMP
snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.6
igmpMulticastVlanState
This object can be used to enable or disable the IGMP snooping multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.7
igmpMulticastVlanReplaceSourceIp
The replacement source IP of this multicast VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.8
igmpMulticastVlanRemapPriority
The remap priority of this multicast VLAN.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.9
igmpMulticastVlanReplacePriority
The replacement priority of this multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.10
igmpMulticastVlanSrcPortDymLearn
The source port dynamical learn of this multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.11
igmpMulticastVlanReplaceCVID
The replacement cvid of this multicast VLAN.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.12
igmpMulticastVlanRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.27.2.1.13

igmpMulticastVlanGroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.27.3 · 1 row entry · 4 columns
Open in standard view 
The table containing the IGMP snooping multicast VLAN group information
igmpMulticastVlanGroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.27.3.1
Information about the current IGMP snooping multicast VLAN group.
Indexes
igmpMulticastVlanGroupVid igmpMulticastVlanGroupFromIp igmpMulticastVlanGroupToIp
Column Syntax OID
igmpMulticastVlanGroupVid
This object indicates the VID of the IGMP snooping multicast VLAN group.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.27.3.1.1
igmpMulticastVlanGroupFromIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.27.3.1.2
igmpMulticastVlanGroupToIp
Specifies the multicast address list for this VLAN.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.27.3.1.3
igmpMulticastVlanGroupStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.27.3.1.4

multicastVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.27.4 · 1 row entry · 14 columns
Open in standard view 
Information about the IGMP/MLD snooping multicast VLAN table.
multicastVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.27.4.1
The entry of multicastVlanTable.
Indexes
multicastVlanid
Column Syntax OID
multicastVlanid
This object indicates the VLAN ID of the IGMP/MLD snooping
multicast VLAN entry.
Integer32
Constraints:
range: 2-4094
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.1
multicastVlanName
This object indicates the VLAN name of the IGMP/MLD snooping
multicast VLAN entry.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.2
multicastVlanSourcePort
This object indicates the port list of the source ports of the
IGMP/MLD snooping multicast VLAN. The source ports will be set as
tag ports of the VLAN entry and the IGMP control messages received
from themember port…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.3
multicastVlanMemberPort
This object indicates the port list of the member ports of the
IGMP/MLD snooping multicast VLAN. The source ports will be set as
untagged ports of the VLAN entry and the IGMP control messages
received from themember p…
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.4
multicastVlanTagMemberPort
This object indicates the port list of the tag member ports of the
IGMP/MLD snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.5
multicastVlanUntaggedSourcePort
This object indicates the port list of the untag source ports of the
IGMP/MLD snooping multicast VLAN.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.6
multicastVlanState
This object can be used to enable or disable the IGMP/MLD snooping
multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.7
multicastVlanIgmpReplaceSourceIp
The replacement source IP of this IGMP snooping multicast VLAN.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.8
multicastVlanMldReplaceSourceIp
The replacement source IP of this MLD snooping multicast VLAN.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.9
multicastVlanRemapPriority
The remap priority of this multicast VLAN.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.10
multicastVlanReplacePriority
The replacement priority of this multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.11
multicastVlanSrcPortDymLearn
The source port dynamical learn of this multicast VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.12
multicastVlanReplaceCVID
The replacement cvid of this multicast VLAN.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.13
multicastVlanRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.27.4.1.14

multicastVlanGroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.27.5 · 1 row entry · 5 columns
Open in standard view 
The table containing the IGMP/MLD snooping multicast VLAN group information
multicastVlanGroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.27.5.1
The entry of multicastVlanGroupTable.
Indexes
multicastVlanGroupVid multicastVlanGroupIpType multicastVlanGroupFromIp multicastVlanGroupToIp
Column Syntax OID
multicastVlanGroupVid
This object indicates the VID of the IGMP/MLD snooping multicast VLAN group.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.27.5.1.1
multicastVlanGroupIpType
Type of specifies the multicast address list for this VLAN.
Enumeration
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.27.5.1.2
multicastVlanGroupFromIp
Specifies the multicast address list for this VLAN.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.27.5.1.3
multicastVlanGroupToIp
Specifies the multicast address list for this VLAN.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.27.5.1.4
multicastVlanGroupStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.27.5.1.5

dhcpRelayVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.28.1.5 · 1 row entry · 2 columns
Open in standard view 
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
dhcpRelayVlanTableEntry entry .1.3.6.1.4.1.171.10.75.15.2.28.1.5.1
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
Indexes
dhcpRelayVlanSettingsVLANID
Column Syntax OID
dhcpRelayVlanSettingsVLANID
This object displays the current VLAN ID of the device.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.28.1.5.1.1
dhcpRelayVlanSettingsState
This object indicates DHCP relay function of VLAN is enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.28.1.5.1.2

dhcpBOOTPRelayInterfaceSettingsTable

table
.1.3.6.1.4.1.171.10.75.15.2.28.2.1 · 1 row entry · 3 columns
Open in standard view 
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
dhcpBOOTPRelayInterfaceSettingsEntry entry .1.3.6.1.4.1.171.10.75.15.2.28.2.1.1
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
Indexes
dhcpBOOTPRelayInterface dhcpBOOTPRelayServerIP
Column Syntax OID
dhcpBOOTPRelayInterface
This object indicates the name of the IP interface.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.10.75.15.2.28.2.1.1.1
dhcpBOOTPRelayServerIP
This object indicates the DHCP server IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.28.2.1.1.2
dhcpBOOTPRelayInterfaceSettingsRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.28.2.1.1.3

dhcpLocalRelayTable

table
.1.3.6.1.4.1.171.10.75.15.2.29.2 · 1 row entry · 2 columns
Open in standard view 
This table indicates the IP address as a destination to forward (local relay) DHCP packets to.
dhcpLocalRelayTableEntry entry .1.3.6.1.4.1.171.10.75.15.2.29.2.1
A list of information indicates the IP address as a destination to forward (local relay) DHCP packets to.
Indexes
dhcpLocalRelaySettingsVLANID
Column Syntax OID
dhcpLocalRelaySettingsVLANID
This object displays the current VLAN ID of the device.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.29.2.1.1
dhcpLocalRelaySettingsState
This object indicates DHCP local relay function of VLAN is enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.29.2.1.2

lldpPortConfigTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.11 · 1 row entry · 4 columns
Open in standard view 
The table that controls LLDP frame transmission on individual
ports.
lldpPortConfigEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.11.1
LLDP configuration information for a particular port.
This configuration parameter controls the transmission and
the reception of LLDP frames on those ports whose rows are
created in this table.
Indexes
lldpPortConfigPortNum
Column Syntax OID
lldpPortConfigPortNum
The index value used to identify the port component
(contained in the local chassis with the LLDP agent)
associated with this entry.

The value of this object is used as a port index to the
lldpPortConfigT…
LldpPortNumber
Textual Convention: LldpPortNumber Integer32
Type Constraints:
range: 1..4096
 .1.3.6.1.4.1.171.10.75.15.2.32.11.1.1
lldpPortConfigAdminStatus
The administratively desired status of the local LLDP agent.

If the associated lldpPortConfigAdminStatus object has a
value of 'txOnly(1)', then LLDP agent will transmit LLDP
frames on this port and it wi…
Enumerationr/w
Enumerated Values:
1txOnly
2rxOnly
3txAndRx
4disabled
 .1.3.6.1.4.1.171.10.75.15.2.32.11.1.2
lldpPortConfigNotificationEnable
The lldpPortConfigNotificationEnable controls, on a per
port basis, whether or not notifications from the agent
are enabled. The value true(1) means that notifications are
enabled; the value false(2) means that they ar…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.11.1.3
lldpPortConfigTLVsTxEnable
The lldpPortConfigTLVsTxEnable, defined as a bitmap,
includes the basic set of LLDP TLVs whose transmission is
allowed on the local LLDP agent by the network management.
Each bit in the bitmap corresponds to a TLV type …
Bitsr/w
Enumerated Values:
0portDesc
1sysName
2sysDesc
3sysCap
 .1.3.6.1.4.1.171.10.75.15.2.32.11.1.4

lldpXdot3PortConfigTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.1.1 · 1 row entry · 1 columns
Open in standard view 
A table that controls selection of LLDP TLVs to be transmitted 
on individual ports.
lldpXdot3PortConfigEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.1.1.1
LLDP configuration information that controls the
transmission of IEEE 802.3 organizationally defined TLVs on
LLDP transmission capable ports.

This configuration object augments the lldpPortConfigEntry of
th…
Indexes
No indexes recorded
Column Syntax OID
lldpXdot3PortConfigTLVsTxEnable
The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap,
includes the IEEE 802.3 organizationally defined set of LLDP
TLVs whose transmission is allowed on the local LLDP agent by
the network management. Each bit in t…
Bitsr/w
Enumerated Values:
0macPhyConfigStatus
1powerViaMDI
2linkAggregation
3maxFrameSize
 .1.3.6.1.4.1.171.10.75.15.2.32.12.1.1.1.1

lldpXdot3LocPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.2.1 · 1 row entry · 4 columns
Open in standard view 
This table contains one row per port of Ethernet port
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.
lldpXdot3LocPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.2.1.1
Information about a particular port component.
Indexes
lldpXdot3LocPortAutoNegSupported
Column Syntax OID
lldpXdot3LocPortAutoNegSupported
The truth value used to indicate whether the given port
(associated with the local system) supports Auto-negotiation.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.1.1.1
lldpXdot3LocPortAutoNegEnabled
The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the local system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.1.1.2
lldpXdot3LocPortAutoNegAdvertisedCap
This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
local system.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.1.1.3
lldpXdot3LocPortOperMauType
An integer value that indicates the operational MAU type
of the given port on the local system.

This object contains the integer value derived from the
list position of the corresponding dot3MauType as li…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.1.1.4

lldpXdot3LocPowerTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.2.2 · 1 row entry · 6 columns
Open in standard view 
This table contains one row per port of power ethernet 
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.
lldpXdot3LocPowerEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1
Information about a particular port component.
Indexes
lldpXdot3LocPowerPortClass
Column Syntax OID
lldpXdot3LocPowerPortClass
The value that identifies the port Class of the given port
associated with the local system.
LldpPowerPortClass
Textual Convention: LldpPowerPortClass Enumeration
Type Values:
1pClassPSE
2pClassPD
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1.1
lldpXdot3LocPowerMDISupported
The truth value used to indicate whether the MDI power is
supported on the given port associated with the local system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1.2
lldpXdot3LocPowerMDIEnabled
The truth value used to identify whether MDI power is
enabled on the given port associated with the local system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1.3
lldpXdot3LocPowerPairControlable
The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with t…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1.4
lldpXdot3LocPowerPairs
This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the local system.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1.5
lldpXdot3LocPowerClass
This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
local system.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.2.1.6

lldpXdot3LocLinkAggTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.2.3 · 1 row entry · 2 columns
Open in standard view 
This table contains one row per port of link aggregation 
information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.
lldpXdot3LocLinkAggEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.2.3.1
Link Aggregation information about a particular port
component.
Indexes
lldpXdot3LocLinkAggStatus
Column Syntax OID
lldpXdot3LocLinkAggStatus
The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.
LldpLinkAggStatusMap
Textual Convention: LldpLinkAggStatusMap Bits
Type Values:
0aggCapable
1aggEnabled
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.3.1.1
lldpXdot3LocLinkAggPortId
This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component in link aggregation.

If the port i…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.3.1.2

lldpXdot3LocMaxFrameSizeTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.2.4 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port of maximum frame 
size information (as a part of the LLDP 802.3 organizational
extension) on the local system known to this agent.
lldpXdot3LocMaxFrameSizeEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.2.4.1
Maximum Frame Size information about a particular port
component.
Indexes
lldpXdot3LocMaxFrameSize
Column Syntax OID
lldpXdot3LocMaxFrameSize
An integer value indicating the maximum supported frame
size in octets on the given port of the local system.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.32.12.2.4.1.1

lldpXdot3RemPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.3.1 · 1 row entry · 4 columns
Open in standard view 
This table contains Ethernet port information (as a part
of the LLDP 802.3 organizational extension) of the remote
system.
lldpXdot3RemPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.3.1.1
Information about a particular physical network connection.
Indexes
lldpXdot3RemPortAutoNegSupported
Column Syntax OID
lldpXdot3RemPortAutoNegSupported
The truth value used to indicate whether the given port
(associated with remote system) supports Auto-negotiation.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.1.1.1
lldpXdot3RemPortAutoNegEnabled
The truth value used to indicate whether port
Auto-negotiation is enabled on the given port associated
with the remote system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.1.1.2
lldpXdot3RemPortAutoNegAdvertisedCap
This object contains the value (bitmap) of the
ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC
3636) which is associated with the given port on the
remote system.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.1.1.3
lldpXdot3RemPortOperMauType
An integer value that indicates the operational MAU type
of the sending device.

This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF …
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.1.1.4

lldpXdot3RemPowerTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.3.2 · 1 row entry · 6 columns
Open in standard view 
This table contains Ethernet power information (as a part
of the LLDP 802.3 organizational extension) of the remote
system.
lldpXdot3RemPowerEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1
Information about a particular physical network connection.
Indexes
lldpXdot3RemPowerPortClass
Column Syntax OID
lldpXdot3RemPowerPortClass
The value that identifies the port Class of the given port
associated with the remote system.
LldpPowerPortClass
Textual Convention: LldpPowerPortClass Enumeration
Type Values:
1pClassPSE
2pClassPD
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1.1
lldpXdot3RemPowerMDISupported
The truth value used to indicate whether the MDI power
is supported on the given port associated with the remote
system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1.2
lldpXdot3RemPowerMDIEnabled
The truth value used to identify whether MDI power is
enabled on the given port associated with the remote system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1.3
lldpXdot3RemPowerPairControlable
The truth value is derived from the value of
pethPsePortPowerPairsControlAbility object (defined in IETF
RFC 3621) and is used to indicate whether the pair selection
can be controlled on the given port associated with t…
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1.4
lldpXdot3RemPowerPairs
This object contains the value of the pethPsePortPowerPairs
object (defined in IETF RFC 3621) which is associated with
the given port on the remote system.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1.5
lldpXdot3RemPowerClass
This object contains the value of the
pethPsePortPowerClassifications object (defined in IETF
RFC 3621) which is associated with the given port on the
remote system.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.2.1.6

lldpXdot3RemLinkAggTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.3.3 · 1 row entry · 2 columns
Open in standard view 
This table contains port link aggregation information
(as a part of the LLDP 802.3 organizational extension)
of the remote system.
lldpXdot3RemLinkAggEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.3.3.1
Link Aggregation information about remote system's port
component.
Indexes
lldpXdot3RemLinkAggStatus
Column Syntax OID
lldpXdot3RemLinkAggStatus
The bitmap value contains the link aggregation capabilities
and the current aggregation status of the link.
LldpLinkAggStatusMap
Textual Convention: LldpLinkAggStatusMap Bits
Type Values:
0aggCapable
1aggEnabled
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.3.1.1
lldpXdot3RemLinkAggPortId
This object contains the IEEE 802.3 aggregated port
identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1),
derived from the ifNumber of the ifIndex for the port
component associated with the remote system.
…
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.3.1.2

lldpXdot3RemMaxFrameSizeTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.12.3.4 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port of maximum frame 
size information (as a part of the LLDP 802.3 organizational
extension) of the remote system.
lldpXdot3RemMaxFrameSizeEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.12.3.4.1
Maximum Frame Size information about a particular port
component.
Indexes
lldpXdot3RemMaxFrameSize
Column Syntax OID
lldpXdot3RemMaxFrameSize
An integer value indicating the maximum supported frame
size in octets on the port component associated with the
remote system.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.32.12.3.4.1.1

lldpXdot1ConfigPortVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.1.1 · 1 row entry · 1 columns
Open in standard view 
A table that controls selection of LLDP Port VLAN-ID TLVs
to be transmitted on individual ports.
lldpXdot1ConfigPortVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.1.1.1
LLDP configuration information that controls the
transmission of IEEE 802.1 organizationally defined Port
VLAN-ID TLV on LLDP transmission capable ports.

This configuration object augments the lldpPortConfi…
Indexes
No indexes recorded
Column Syntax OID
lldpXdot1ConfigPortVlanTxEnable
The lldpXdot1ConfigPortVlanTxEnable, which is defined as
a truth value and configured by the network management,
determines whether the IEEE 802.1 organizationally defined
port VLAN TLV transmission is allowed on a give…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.1.1.1.1

lldpXdot1ConfigVlanNameTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.1.2 · 1 row entry · 1 columns
Open in standard view 
The table that controls selection of LLDP VLAN name TLV
instances to be transmitted on individual ports.
lldpXdot1ConfigVlanNameEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.1.2.1
LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
VLAN name instance will be transmitted.

This configuration object augments the lldpLocVla…
Indexes
No indexes recorded
Column Syntax OID
lldpXdot1ConfigVlanNameTxEnable
The boolean value that indicates whether the corresponding
Local System VLAN name instance will be transmitted on the
port defined by the given lldpXdot1LocVlanNameEntry.

The value of this object must be …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.1.2.1.1

lldpXdot1ConfigProtoVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.1.3 · 1 row entry · 1 columns
Open in standard view 
The table that controls selection of LLDP Port and Protocol
VLAN ID TLV instances to be transmitted on individual ports.
lldpXdot1ConfigProtoVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.1.3.1
LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol VLAN instance will be transmitted.

This configuration object augments the lldpXd…
Indexes
No indexes recorded
Column Syntax OID
lldpXdot1ConfigProtoVlanTxEnable
The boolean value that indicates whether the corresponding
Local System Port and Protocol VLAN instance will
be transmitted on the port defined by the given
lldpXdot1LocProtoVlanEntry.

The value of this o…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.1.3.1.1

lldpXdot1ConfigProtocolTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.1.4 · 1 row entry · 1 columns
Open in standard view 
The table that controls selection of LLDP Protocol 
TLV instances to be transmitted on individual ports.
lldpXdot1ConfigProtocolEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.1.4.1
LLDP configuration information that specifies the set of
ports (represented as a PortList) on which the Local System
Protocol instance will be transmitted.

This configuration object augments the lldpXdot1Lo…
Indexes
No indexes recorded
Column Syntax OID
lldpXdot1ConfigProtocolTxEnable
The boolean value that indicates whether the corresponding
Local System Protocol Identity instance will be transmitted
on the port defined by the given lldpXdot1LocProtocolEntry.

The value of this object …
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.1.4.1.1

lldpXdot1LocTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.2.1 · 1 row entry · 1 columns
Open in standard view 
This table contains one row per port for IEEE 802.1
organizationally defined LLDP extension on the local system
known to this agent.
lldpXdot1LocEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.2.1.1
Information about IEEE 802.1 organizationally defined
LLDP extension.
Indexes
lldpXdot1LocPortVlanId
Column Syntax OID
lldpXdot1LocPortVlanId
The integer value used to identify the port's VLAN identifier
associated with the local system. A value of zero shall
be used if the system either does not know the PVID or does
not support port-based VLAN operation.
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.1.1.1

lldpXdot1LocProtoVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.2.2 · 1 row entry · 3 columns
Open in standard view 
This table contains one or more rows per Port and Protocol
VLAN information about the local system.
lldpXdot1LocProtoVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.2.2.1
Port and protocol VLAN ID Information about a particular
port component. There may be multiple port and protocol VLANs,
identified by a particular lldpXdot1LocProtoVlanId, configured
on the given port.
Indexes
lldpXdot1LocProtoVlanId
Column Syntax OID
lldpXdot1LocProtoVlanId
The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
local system. A value of zero shall be used if the system
either does not know the protocol VLAN ID (PPV…
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.2.1.1
lldpXdot1LocProtoVlanSupported
The truth value used to indicate whether the given port
(associated with the local system) supports port and protocol
VLANs.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.2.1.2
lldpXdot1LocProtoVlanEnabled
The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the local system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.2.1.3

lldpXdot1LocVlanNameTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.2.3 · 1 row entry · 2 columns
Open in standard view 
This table contains one or more rows per IEEE 802.1Q VLAN
name information on the local system known to this agent.
lldpXdot1LocVlanNameEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.2.3.1
VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1LocVlanId, configured on the given port.
Indexes
lldpXdot1LocVlanId
Column Syntax OID
lldpXdot1LocVlanId
The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port is compatible.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.3.1.1
lldpXdot1LocVlanName
The string value used to identify VLAN name identified by the
Vlan Id associated with the given port on the local system.

This object should contain the value of the dot1QVLANStaticName
object (defined in…
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.3.1.2

lldpXdot1LocProtocolTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.2.4 · 1 row entry · 2 columns
Open in standard view 
This table contains one or more rows per protocol identity
information on the local system known to this agent.
lldpXdot1LocProtocolEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.2.4.1
Information about particular protocols that are accessible
through the given port component.

There may be multiple protocols, identified by particular
lldpXdot1ProtocolIndex, and lldpLocPortNum.
Indexes
lldpXdot1LocProtocolIndex
Column Syntax OID
lldpXdot1LocProtocolIndex
This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.4.1.1
lldpXdot1LocProtocolId
The octet string value used to identify the protocols
associated with the given port of the local system.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.32.13.2.4.1.2

lldpXdot1RemTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.3.1 · 1 row entry · 1 columns
Open in standard view 
This table contains one or more rows per physical network
connection known to this agent.  The agent may wish to
ensure that only one lldpXdot1RemEntry is present for
each local port, or it may choose to maintain multiple
lldpXdot1RemEntries for the same local port.
lldpXdot1RemEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.3.1.1
Information about a particular port component.
Indexes
lldpXdot1RemPortVlanId
Column Syntax OID
lldpXdot1RemPortVlanId
The integer value used to identify the port's VLAN identifier
associated with the remote system. if the remote system
either does not know the PVID or does not support port-based
VLAN operation, the value of lldpXdot1R…
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.1.1.1

lldpXdot1RemProtoVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.3.2 · 1 row entry · 3 columns
Open in standard view 
This table contains one or more rows per Port and Protocol
VLAN information about the remote system, received on the
given port.
lldpXdot1RemProtoVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.3.2.1
Port and protocol VLAN name Information about a particular
port component. There may be multiple protocol VLANs,
identified by a particular lldpXdot1RemProtoVlanId, configured
on the remote system.
Indexes
lldpXdot1RemProtoVlanId
Column Syntax OID
lldpXdot1RemProtoVlanId
The integer value used to identify the port and protocol
VLANs associated with the given port associated with the
remote system.

If port and protocol VLANs are not supported on the given
port associated w…
Integer32
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.2.1.1
lldpXdot1RemProtoVlanSupported
The truth value used to indicate whether the given port
(associated with the remote system) is capable of supporting
port and protocol VLANs.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.2.1.2
lldpXdot1RemProtoVlanEnabled
The truth value used to indicate whether the port and
protocol VLANs are enabled on the given port associated with
the remote system.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.2.1.3

lldpXdot1RemVlanNameTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.3.3 · 1 row entry · 2 columns
Open in standard view 
This table contains one or more rows per IEEE 802.1Q VLAN
name information about the remote system, received on the
given port.
lldpXdot1RemVlanNameEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.3.3.1
VLAN name Information about a particular port component.
There may be multiple VLANs, identified by a particular
lldpXdot1RemVlanId, received on the given port.
Indexes
lldpXdot1RemVlanId
Column Syntax OID
lldpXdot1RemVlanId
The integer value used to identify the IEEE 802.1Q
VLAN IDs with which the given port of the remote system
is compatible.
Q-BRIDGE-MIBVlanId
Textual Convention: Q-BRIDGE-MIBVlanId Integer32
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.3.1.1
lldpXdot1RemVlanName
The string value used to identify VLAN name identified by the
VLAN Id associated with the remote system.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.3.1.2

lldpXdot1RemProtocolTable

table
.1.3.6.1.4.1.171.10.75.15.2.32.13.3.4 · 1 row entry · 2 columns
Open in standard view 
This table contains one or more rows per protocol information
about the remote system, received on the given port.
lldpXdot1RemProtocolEntry entry .1.3.6.1.4.1.171.10.75.15.2.32.13.3.4.1
Protocol information about a particular port component.
There may be multiple protocols, identified by a particular
lldpXdot1ProtocolIndex, received on the given port.
Indexes
lldpXdot1RemProtocolIndex
Column Syntax OID
lldpXdot1RemProtocolIndex
This object represents an arbitrary local integer value used
by this agent to identify a particular protocol identity.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.4.1.1
lldpXdot1RemProtocolId
The octet string value used to identify the protocols
associated with the given port of remote system.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.32.13.3.4.1.2

cpuFilterProfileTable

table
.1.3.6.1.4.1.171.10.75.15.2.33.1.2 · 1 row entry · 20 columns
Open in standard view 
A table to CPUInterfaceFilter profile .
cpuFilterProfileEntry entry .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1
Each entry in this table is a CPUInterfaceFilter profile.
Index to the table is CPUInterfaceFilter profile ID.
Indexes
cpuFilterProfileNo
Column Syntax OID
cpuFilterProfileNo
The CPUInterfaceFilter Profile ID. The ID 1 to 50 is user-defined CPUInterfaceFilter,
and the ID more than 50 is reserved for system-defined CPUInterfaceFilter.
The user only allow to create user-defined CPUInterfaceFil…
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.1
cpuFilterProfileType
The CPUInterfaceFilter Profile type, possible value are
l2 (1) - for MAC-based rule,
l3 (2) - for IPv4-based rule,
udf (9) - for User-defined rule,
l3v6 (11) - for IPv6-based rule
Enumerationr/w
Enumerated Values:
1l2
2l3
9udf
11l3v6
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.2
cpuFilterProfileRuleCount
The number of rules in this profile.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.3
cpuFilterProfileMask
Indicate which field want to care in the packet.
Turn on the following bits to select the following items
Type Item BIT
------------------------------------------
L2 DST_MAC …
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.4
cpuFilterProfileDstMacAddrMask
The CPUInterfaceFilter Profile destination MAC address mask.
If DST_MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleDstMacAddr,
to caculate a range of MAC address which i…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.5
cpuFilterProfileSrcMacAddrMask
The CPUInterfaceFilter Profile source MAC address mask.
If SRC_MAC is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL2RuleSrcMacAddr,
to caculate a range of MAC address which is rea…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.6
cpuFilterProfileIPProtocol
Indicate which IP Protocol will be care in this profile.
Only profile type is l3 can set the IP protocol.
For others, this field will be none.
Enumerationr/w
Enumerated Values:
0none
1icmp
2igmp
6tcp
17udp
41ipv6
255ipMask
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.7
cpuFilterProfileIPProtocolMask
The CPUInterfaceFilter Profile IP protocol mask.
If cpuFilterProfileIPProtocol set to ipMask, this field will be refered.
It will work with its member rule field,cpuFilterL3RuleProtocol,
to caculate a range of IP proto…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.8
cpuFilterProfileDstIpAddrMaskType
IPv6 Address type.
Enumerationr/w
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.9
cpuFilterProfileDstIpAddrMask
The CPUInterfaceFilter Profile destination IP address mask.
If DST_IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleDstIpAddr,
to caculate a range of IP address which is re…
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.10
cpuFilterProfileSrcIpAddrMaskType
IPv6 Address type.
Enumerationr/w
Enumerated Values:
1iPv4
2iPv6
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.11
cpuFilterProfileSrcIpAddrMask
The CPUInterfaceFilter Profile source IP address mask.
If SRC_IP is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleSrcIpAddr,
to caculate a range of IP address which is really …
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.12
cpuFilterProfileDstPortMask
The CPUInterfaceFilter Profile UDP/TCP destination port mask.
If DST_PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpDstPort,
to caculate a range of destination po…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.13
cpuFilterProfileSrcPortMask
The CPUInterfaceFilter Profile UDP/TCP source port mask.
If SRC_PORT is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterL3RuleTcpUdpSrcPort,
to caculate a range of source port which i…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.14
cpuFilterProfileOffset1Mask
The CPUInterfaceFilter Profile Offset1 mask.
If Offset1 is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterUdfRuleOffset1,
to caculate a range of offset1 which is really care.
The val…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.15
cpuFilterProfileOffset2Mask
The CPUInterfaceFilter Profile Offset2 mask.
If Offset2 is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterUdfRuleOffset2,
to caculate a range of offset2 which is really care.
The val…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.16
cpuFilterProfileOffset3Mask
The CPUInterfaceFilter Profile Offset3 mask.
If Offset3 is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterUdfRuleOffset3,
to caculate a range of offset3 which is really care.
The val…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.17
cpuFilterProfileOffset4Mask
The CPUInterfaceFilter Profile Offset4 mask.
If offset4 is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterUdfRuleOffset4,
to caculate a range of offset4 which is really care.
The val…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.18
cpuFilterProfileOffset5Mask
The CPUInterfaceFilter Profile Offset5 mask.
If Offset5 is turn on in cpuFilterProfileMask,
it will work with its member rule field,cpuFilterUdfRuleOffset5,
to caculate a range of offset5 which is really care.
The val…
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.19
cpuFilterProfileStatus
This object indicates the status of this entry, can only be set to
'createAndWait','active' and 'destroy'.
When the value of the entry status is 'createAndWait', it could be
set to 'active' only if the three values of…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.33.1.2.1.20

cpuFilterL2RuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.33.2.1 · 1 row entry · 12 columns
Open in standard view 
A table to configure L2 filter rules in the system.
cpuFilterL2RuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1
Each entry in this table is a L2 filter rule.
Index to the table is the L2 filter number and Profile ID.
Indexes
cpuFilterL2ProfileID cpuFilterL2AccessID
Column Syntax OID
cpuFilterL2ProfileID
L2 Filter rule ID.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.1
cpuFilterL2AccessID
CPUInterfaceFilter Profile ID which this rule join.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.2
cpuFilterL2RuleEtherType
The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition.
Integer32r/w
Constraints:
range: -1--1
range: 1501-65535
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.3
cpuFilterL2RuleDstMacAddr
Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.4
cpuFilterL2RuleSrcMacAddr
Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.5
cpuFilterL2RuleVlanId
Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-4094
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.6
cpuFilterL2Rule1pPriority
802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.7
cpuFilterL2RuleDstMacAddrMask
The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.8
cpuFilterL2RuleSrcMacAddrMask
The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.9
cpuFilterL2RuleInPortList
Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.10
cpuFilterL2RuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action is 'drop', the packet will be discarded.
Enumerationr/w
Enumerated Values:
1allow
2drop
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.11
cpuFilterL2RuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.33.2.1.1.14

cpuFilterL3RuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.33.3.1 · 1 row entry · 25 columns
Open in standard view 
A table to configure L3 filter rules in the system.
cpuFilterL3RuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1
Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.
Indexes
cpuFilterL3RuleProfileNo cpuFilterL3RuleAccessID
Column Syntax OID
cpuFilterL3RuleProfileNo
L3 Filter rule ID.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.1
cpuFilterL3RuleAccessID
The Profile ID which this rule join.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.2
cpuFilterL3RuleProtocol
The type of protocol to be checked against the packet.
Enumerationr/w
Enumerated Values:
1icmp
2igmp
6tcp
17udp
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.3
cpuFilterL3RuleProtocolMask
The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX …
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.4
cpuFilterL3RuleICMPMessageType
The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1',which…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.5
cpuFilterL3RuleICMPMessageCode
The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1', whic…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.6
cpuFilterL3RuleDstIpAddr
Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.7
cpuFilterL3RuleSrcIpAddr
Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.8
cpuFilterL3RuleDstIpAddrMask
The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.9
cpuFilterL3RuleSrcIpAddrMask
The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.10
cpuFilterL3RuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.11
cpuFilterL3RuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.12
cpuFilterL3RuleTcpUdpDstPortMask
The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.13
cpuFilterL3RuleTcpUdpSrcPortMask
The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.14
cpuFilterL3RuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.15
cpuFilterL3RuleTcpRstBit
The TCP RST bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.16
cpuFilterL3RuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.17
cpuFilterL3RuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default
value is 'dontcare'(-1). which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.18
cpuFilterL3RuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.19
cpuFilterL3RuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.20
cpuFilterL3RuleDscp
The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.21
cpuFilterL3RuleIgmpType
The IGMP Type to be checked against the packet.A default value is '-1',
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.22
cpuFilterL3RulePortList
Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.23
cpuFilterL3RuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
Enumerationr/w
Enumerated Values:
1allow
2drop
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.24
cpuFilterL3RuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.33.3.1.1.27

cpuFilterv6L3RuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.33.3.2 · 1 row entry · 24 columns
Open in standard view 
A table to configure L3 filter rules in the system.
cpuFilterv6L3RuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1
Each entry in this table is a L3 filter rule.
Index to the table is L3 filter number and Profile ID.
Indexes
cpuFilterv6L3RuleProfileNo cpuFilterv6L3RuleAccessID
Column Syntax OID
cpuFilterv6L3RuleProfileNo
L3 Filter rule ID.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.1
cpuFilterv6L3RuleAccessID
The Profile ID which this rule join.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.2
cpuFilterv6L3RuleProtocol
The type of protocol to be checked against the packet.
Enumerationr/w
Enumerated Values:
1icmp
6tcp
17udp
41ipv6
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.3
cpuFilterv6L3RuleProtocolMask
The IP protocol mask.
This field is read-only and copy from it's Profile setting.
It will work with the other field,cpuFilterL3RuleProtocol,
to caculate a range of IP protocol which is really care.
The value is in HEX …
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.4
cpuFilterv6L3RuleICMPMessageType
The message type to be checked against the packet. If the
message type matches with the packet, then the packet will be
dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1',which…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.5
cpuFilterv6L3RuleICMPMessageCode
The message code to be checked against the packet. If the
packet matches with the message code, then the packet will
be dropped / allowed based on the action set in cpuFilterL3RuleAction.
The default value is '-1', whic…
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.6
cpuFilterv6L3RuleDstIpAddr
Destination IP address to be matched with the packet.
The default value will be zero, which means the rule
don't care this condition.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.7
cpuFilterv6L3RuleSrcIpAddr
Source IP address to be matched with the packet.
The default value will be zero, which means the
rule don't care this condition.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.8
cpuFilterv6L3RuleDstIpAddrMask
The IP subnet mask for Destination IP address.
This field is read-only and copy from it's Profile setting.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.9
cpuFilterv6L3RuleSrcIpAddrMask
The IP subnet mask for Source IP address.
This field is read-only and copy from it's Profile setting.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.10
cpuFilterv6L3RuleTcpUdpDstPort
The TCP / UDP destination port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.11
cpuFilterv6L3RuleTcpUdpSrcPort
The TCP / UDP source port. The default value is -1,
which means the rule don't care this condition.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.12
cpuFilterv6L3RuleTcpUdpDstPortMask
The TCP / UDP Destination port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.13
cpuFilterv6L3RuleTcpUdpSrcPortMask
The TCP / UDP Source port Mask.
This field is read-only and copy from it's Profile setting.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.14
cpuFilterv6L3RuleTcpAckBit
The TCP ACK bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.15
cpuFilterv6L3RuleTcpRstBit
The TCP RST bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.16
cpuFilterv6L3RuleTcpUrgBit
The TCP Urg bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.17
cpuFilterv6L3RuleTcpPshBit
The TCP Psh bit to be checked against the packet. The default
value is 'dontcare'(-1). which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.18
cpuFilterv6L3RuleTcpSynBit
The TCP Syn bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.19
cpuFilterv6L3RuleTcpFinBit
The TCP Fin bit to be checked against the packet. The default
value is 'dontcare'(-1), which means the rule don't care this
condition.
Enumerationr/w
Enumerated Values:
-1dontcare
1establish
2notEstablish
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.20
cpuFilterv6L3RuleTrafficClass
The IP Dscp value to be checked against the packet.
A default value is '-1', which means the rule don't
care this condition.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.21
cpuFilterv6L3RulePortList
Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.22
cpuFilterv6L3RuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
Enumerationr/w
Enumerated Values:
1allow
2drop
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.23
cpuFilterv6L3RuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.33.3.2.1.24

cpuFilterUdfRuleTable

table
.1.3.6.1.4.1.171.10.75.15.2.33.4.1 · 1 row entry · 15 columns
Open in standard view 
A table to configure Udf filter rules in the system.
cpuFilterUdfRuleEntry entry .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1
Each entry in this table is a Udf filter rule.
Index to the table is Udf filter number and Profile ID.
Indexes
cpuFilterUdfRuleProfileNo cpuFilterUdfRuleAccessID
Column Syntax OID
cpuFilterUdfRuleProfileNo
Udf Filter rule ID.
Integer32
Constraints:
range: 1-5
 .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.1
cpuFilterUdfRuleAccessID
The Profile ID which this rule join.
Integer32
Constraints:
range: 1-3
 .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.2
cpuFilterUdfRuleOffset1
The filter value of Offset 1.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.3
cpuFilterUdfRuleOffset2
The filter value of Offset 2.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.4
cpuFilterUdfRuleOffset3
The filter value of Offset 3.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.5
cpuFilterUdfRuleOffset4
The filter value of Offset 4.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.6
cpuFilterUdfRuleOffset5
The filter value of Offset 5.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.7
cpuFilterUdfRuleOffset1Mask
The filter Mask of Offset 1.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.8
cpuFilterUdfRuleOffset2Mask
The filter Mask of Offset 2.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.9
cpuFilterUdfRuleOffset3Mask
The filter Mask of Offset 3.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.10
cpuFilterUdfRuleOffset4Mask
The filter Mask of Offset 4.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.11
cpuFilterUdfRuleOffset5Mask
The filter Mask of Offset 5.
OctetString .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.12
cpuFilterUdfRulePortList
Specifies the complete set of ports over which if the packet arrives
this filter rule will be applicable.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.13
cpuFilterUdfRuleAction
Specifies the action to be taken on the packet if the filter
rule matches.
Enumerationr/w
Enumerated Values:
1allow
2drop
 .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.14
cpuFilterUdfRuleStatus
This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of this object
is SET 'active'. The entry in…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.33.4.1.1.15

staticARPTable

table
.1.3.6.1.4.1.171.10.75.15.2.34.2 · 1 row entry · 3 columns
Open in standard view 
A list of the Static MACs
staticARPEntry entry .1.3.6.1.4.1.171.10.75.15.2.34.2.1
A Static MAC entry containing the mac and forwarding port.
Indexes
staticARPIP staticARPMac
Column Syntax OID
staticARPIP
The VLAN ID of the static ARP IP.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.34.2.1.2
staticARPMac
The MAC address associated of the static ARP entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.34.2.1.3
staticARPRowStatus
The status of an entry in the Static ARP Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available. The trunk member port can not set up static ARP.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.34.2.1.5

cableDiagTable

table
.1.3.6.1.4.1.171.10.75.15.2.35.1 · 1 row entry · 13 columns
Open in standard view 
A table that contains the cable situation for each port.
cableDiagEntry entry .1.3.6.1.4.1.171.10.75.15.2.35.1.1
A list of cable situations for each port on the device.
Indexes
cableDiagPortIndex
Column Syntax OID
cableDiagPortIndex
The interface index for which the configuration in this
entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.1
cableDiagPortType
Indicates the supported port data rate classification.
Enumeration
Enumerated Values:
0fastEthernet
1gigaEthernet
2other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.2
cableDiagLinkStatus
This object indicates the link status.
Enumeration
Enumerated Values:
0linkdown
1linkup
2other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.3
cableDiagPair1Status
Cable diagnostics pair 1 test result.
Enumeration
Enumerated Values:
0ok
1open
2short
3open-short
4crosstalk
5unknown
6count
7no-cable
8other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.4
cableDiagPair2Status
Cable diagnostics pair 2 test result.
Enumeration
Enumerated Values:
0ok
1open
2short
3open-short
4crosstalk
5unknown
6count
7no-cable
8other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.5
cableDiagPair3Status
Cable diagnostics pair 3 test result.
Enumeration
Enumerated Values:
0ok
1open
2short
3open-short
4crosstalk
5unknown
6count
7no-cable
8other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.6
cableDiagPair4Status
Cable diagnostics pair 4 test result.
Enumeration
Enumerated Values:
0ok
1open
2short
3open-short
4crosstalk
5unknown
6count
7no-cable
8other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.7
cableDiagPair1Length
Cable Diagnostics pair 1 fault distance.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.8
cableDiagPair2Length
Cable diagnostics pair 2 fault distance.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.9
cableDiagPair3Length
Cable diagnostics pair 3 fault distance.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.10
cableDiagPair4Length
Cable diagnostics pair 4 fault distance.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.11
cableDiagAction
Function to run the cable diagnostic on selected port.
Can not detect fiber ports
Enumerationr/w
Enumerated Values:
1action
2processing
3other
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.12
cableDiagStatus
Indicates the status of cable diagnostics on the port.
not-run - cable diagnostics has never been run for this port
processing - cable diagnostics is currently running on the port
last-test-ok - the last cable diagnosti…
Enumeration
Enumerated Values:
1notrun
2processing
3lasttestok
4lasttestfailed
 .1.3.6.1.4.1.171.10.75.15.2.35.1.1.13

autoCableDiagTable

table
.1.3.6.1.4.1.171.10.75.15.2.35.2 · 1 row entry · 2 columns
Open in standard view 
When detecting a port linkdown, system will execute cable diagnostic function on the port, 
and then send the trap that includes test result.
autoCableDiagEntry entry .1.3.6.1.4.1.171.10.75.15.2.35.2.1
When detecting a port linkdown, system will execute cable diagnostic function on the port,
and then send the trap that includes test result.
Indexes
autoCableDiagPortIndex
Column Syntax OID
autoCableDiagPortIndex
The interface index for which the configuration in this
entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.35.2.1.1
autoCableDiagStatus
This object indicates the link status.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.35.2.1.2

vlanTrunkTable

table
.1.3.6.1.4.1.171.10.75.15.2.36.1.2 · 1 row entry · 2 columns
Open in standard view 
This table is used to manage the VLAN trunking feature of the device.
vlanTrunkEntry entry .1.3.6.1.4.1.171.10.75.15.2.36.1.2.1
There is one entry in this table for each created
port-channel port.
Indexes
vlanTrunkIfIndex
Column Syntax OID
vlanTrunkIfIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.36.1.2.1.1
vlanTrunkState
Sets the VLAN trunk status as enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.36.1.2.1.2

qinqTable

table
.1.3.6.1.4.1.171.10.75.15.2.37.1.2 · 1 row entry · 5 columns
Open in standard view 
A table that contains Q-in-Q VLAN mode information about each port.
qinqEntry entry .1.3.6.1.4.1.171.10.75.15.2.37.1.2.1
A list of Q-in-Q VLAN mode information for each port.
Indexes
qinqIfIndex
Column Syntax OID
qinqIfIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.37.1.2.1.1
qinqRoleState
Sets the QinQ Role as NNI or UNI.
Enumerationr/w
Enumerated Values:
1nni
2uni
 .1.3.6.1.4.1.171.10.75.15.2.37.1.2.1.2
qinqOuterTPID
Sets the QinQ Outer TPID value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.37.1.2.1.3
qinqTrustCVIDState
Sets the QinQ Trust CVID state as enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.37.1.2.1.4
qinqVLANTranslationState
Sets the QinQ VLANTranslation state as enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.37.1.2.1.5

qinqVlanTranslationCVIDTable

table
.1.3.6.1.4.1.171.10.75.15.2.37.2.1 · 1 row entry · 4 columns
Open in standard view 
A table that contains VLAN translation information applied in enabling 
port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ.
qinqVlanTranslationCVIDEntry entry .1.3.6.1.4.1.171.10.75.15.2.37.2.1.1
A list of VLAN translation information applied in enabling a
port's swQinQPortVlanTranslation, swQinQPortTrustCVID and QinQ.
Indexes
qinqVlanTranslationCVID
Column Syntax OID
qinqVlanTranslationCVID
The customer VLAN identifier in a C-TAG.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.37.2.1.1.1
qinqVlanTranslationSVID
A VLAN identifier conveyed in an S-TAG.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.37.2.1.1.2
qinqVlanTranslationSVIDOperation
The 'add' action indicates to add a tag for the assigned SP-VLAN
before the C-VLAN tag. If there is S-TAG in the packet, this rule
will not take effect.
The 'replace' action indicates to replace the C-VLAN in the tag by…
Enumerationr/w
Enumerated Values:
1add
2replace
 .1.3.6.1.4.1.171.10.75.15.2.37.2.1.1.3
qinqVlanTranslationCVIDRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.37.2.1.1.4

swTimeRangeSettingTable

table
.1.3.6.1.4.1.171.10.75.15.2.38.1 · 1 row entry · 21 columns
Open in standard view 
A table to configure time Range in the system.
swTimeRangeSettingEntry entry .1.3.6.1.4.1.171.10.75.15.2.38.1.1
A schedule entry to configure time Range in the system.
Indexes
swTimeRangeIndex
Column Syntax OID
swTimeRangeIndex
The Time Range identifier. The maximum number of Schedule entry is
the number of ports supported PoE function.
The value must be between 1 and 52.
Integer32
Constraints:
range: 1-52
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.1
swTimeRangeName
The Schedule name associated with the Schedule entry (e.g., `abc, bbb').
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.2
swTimeRangeDate
Enable/Disable date range checking while executing time base PoE.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.3
swTimeRangeStartYear
Start year of the Schedule entry.
Enumerationr/w
Enumerated Values:
2009y2009
2010y2010
2011y2011
2012y2012
2013y2013
2014y2014
2015y2015
2016y2016
2017y2017
2018y2018
2019y2019
2020y2020
2021y2021
2022y2022
2023y2023
2024y2024
2025y2025
2026y2026
2027y2027
2028y2028
2029y2029
2030y2030
2031y2031
2032y2032
2033y2033
2034y2034
2035y2035
2036y2036
2037y2037
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.4
swTimeRangeStartMonth
Start month of the Schedule entry.
Enumerationr/w
Enumerated Values:
1january
2february
3march
4april
5may
6june
7july
8august
9september
10october
11november
12december
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.5
swTimeRangeStartDay
Start day of the Schedule entry.
The value must be from 1 to 31.
Integer32r/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.6
swTimeRangeStartHour
Start hour of the Schedule entry.
The value must be from 0 to 23.
Integer32r/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.7
swTimeRangeStartMinute
Start minute of the Schedule entry.
The value must be from 0 to 59.
Integer32r/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.8
swTimeRangeEndYear
End year of the Schedule entry.
Enumerationr/w
Enumerated Values:
2009y2009
2010y2010
2011y2011
2012y2012
2013y2013
2014y2014
2015y2015
2016y2016
2017y2017
2018y2018
2019y2019
2020y2020
2021y2021
2022y2022
2023y2023
2024y2024
2025y2025
2026y2026
2027y2027
2028y2028
2029y2029
2030y2030
2031y2031
2032y2032
2033y2033
2034y2034
2035y2035
2036y2036
2037y2037
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.9
swTimeRangeEndMonth
End month of the Schedule entry.
Enumerationr/w
Enumerated Values:
1january
2february
3march
4april
5may
6june
7july
8august
9september
10october
11november
12december
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.10
swTimeRangeEndDay
End day of the Schedule entry.
The value must be from 1 to 31.
Integer32r/w
Constraints:
range: 1-31
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.11
swTimeRangeEndHour
End hour of the Schedule entry.
The value must be from 0 to 23.
Integer32r/w
Constraints:
range: 0-23
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.12
swTimeRangeEndMinute
End minute of the Schedule entry.
The value must be from 0 to 59.
Integer32r/w
Constraints:
range: 0-59
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.13
swTimeRangeMonday
Enable/Disble scheduling Monday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.14
swTimeRangeTuesday
Enable/Disble scheduling Tuesday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.15
swTimeRangeWednesday
Enable/Disble scheduling Wednesday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.16
swTimeRangeThursday
Enable/Disble scheduling Thursday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.17
swTimeRangeFriday
Enable/Disble scheduling Friday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.18
swTimeRangeSaturday
Enable/Disble scheduling Saturday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.19
swTimeRangeSunday
Enable/Disble scheduling Sunday.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.20
swTimeRangeRowStatus
The status of an entry in the Time Range Information Table. Only a subset
of the rowstatus variables (active, notinservice, createAndWait, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.38.1.1.21

ipv4smtpRecvMailAddrTable

table
.1.3.6.1.4.1.171.10.75.15.2.40.5 · 1 row entry · 3 columns
Open in standard view 
Receivers' mail address table.
ipv4smtpRecvMailAddrEntry entry .1.3.6.1.4.1.171.10.75.15.2.40.5.1
Receivers' mail address entry.
Indexes
ipv4smtpRecvMailAddrIndex
Column Syntax OID
ipv4smtpRecvMailAddrIndex
Receivers' mail address index (1~8).
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.75.15.2.40.5.1.1
ipv4smtpRecvMailAddr
Receivers' mail address.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.40.5.1.2
ipv4smtpRecvMailAddrStatus
Rowstatus of the receiver's mail address.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.40.5.1.3

smtpRecvMailAddrTable

table
.1.3.6.1.4.1.171.10.75.15.2.40.6.7 · 1 row entry · 3 columns
Open in standard view 
Receivers' mail address table.
smtpRecvMailAddrEntry entry .1.3.6.1.4.1.171.10.75.15.2.40.6.7.1
Receivers' mail address entry.
Indexes
smtpRecvMailAddrIndex
Column Syntax OID
smtpRecvMailAddrIndex
Receivers' mail address index (1~8).
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.171.10.75.15.2.40.6.7.1.1
smtpRecvMailAddr
Receivers' mail address.
OctetStringr/w .1.3.6.1.4.1.171.10.75.15.2.40.6.7.1.2
smtpRecvMailAddrStatus
Rowstatus of the receiver's mail address.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.40.6.7.1.3

staticRouteTable

table
.1.3.6.1.4.1.171.10.75.15.2.42.1 · 1 row entry · 8 columns
Open in standard view 
A list of the Static Route Table.
staticRouteEntry entry .1.3.6.1.4.1.171.10.75.15.2.42.1.1
A Static route entry maintain by the IP Address, netmask and gateway.
Indexes
staticRouteIpAddr staticRouteNetmask staticRouteGateway
Column Syntax OID
staticRouteInterfaceID
The InterfaceID of the static Route entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.1
staticRouteIpAddr
Allows the entry of an IP address that will be a static entry into
the Switch's Routing Table.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.2
staticRouteNetmask
Allows the entry of a subnet mask corresponding to the IP address above.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.3
staticRouteGateway
Allows the entry of an IP address of a gateway for the IP address above.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.4
staticRouteMetric
Allows the entry of a routing protocol metric representing the number of
routers between the Switch and the IP address above.(1-65535)
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.5
staticRouteProtocol
The route protocol of the static route entry.
Enumeration
Enumerated Values:
0default
1static
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.6
staticRouteActiveStatus
The active/inactive status of the static route entry.
Enumeration
Enumerated Values:
0active
1inactive
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.8
staticRouteRowStatus
The status of an entry in the Static Route Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.42.1.1.9

staticRouteV6Table

table
.1.3.6.1.4.1.171.10.75.15.2.42.2 · 1 row entry · 8 columns
Open in standard view 
A list of the Static Route Table.
staticRouteV6Entry entry .1.3.6.1.4.1.171.10.75.15.2.42.2.1
A Static route entry maintain by the IP Address, netmask and gateway.
Indexes
staticRouteV6IpAddr staticRouteV6Prefix staticRouteV6NextHop
Column Syntax OID
staticRouteV6InterfaceID
The InterfaceID of the static Route entry.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.1
staticRouteV6IpAddr
Allows the entry of an IP address that will be a static entry into
the Switch's Routing Table.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.2
staticRouteV6Prefix
Allows the entry of a subnet mask corresponding to the IP address above.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.3
staticRouteV6NextHop
Allows the entry of an IP address of a gateway for the IP address above.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.4
staticRouteV6Metric
Allows the entry of a routing protocol metric representing the number of
routers between the Switch and the IP address above.(1-65535)
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.5
staticRouteV6Protocol
The route protocol of the static route entry.
Enumeration
Enumerated Values:
0default
1static
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.6
staticRouteV6ActiveStatus
The active/inactive status of the static route entry.
Enumeration
Enumerated Values:
0active
1inactive
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.8
staticRouteV6RowStatus
The status of an entry in the Static Route Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.42.2.1.9

limitIpMulticastProfileTable

table
.1.3.6.1.4.1.171.10.75.15.2.45.1 · 1 row entry · 4 columns
Open in standard view 
A list of the limit ip multicast Profile Table.
limitIpMulticastProfileEntry entry .1.3.6.1.4.1.171.10.75.15.2.45.1.1
A limit ip multicast entry maintain by the start IP Address, end ip address, profile id.
Indexes
limitIpMulticastIPType limitIpMulticastProfileID
Column Syntax OID
limitIpMulticastIPType
Indicate the IP type of profile.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.171.10.75.15.2.45.1.1.1
limitIpMulticastProfileID
The ProfileID of the limit ip multicast profile entry.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.10.75.15.2.45.1.1.2
limitIpMulticastProfileName
The ProfileName of the limit ip multicast profile entry.
OctetStringr/w
Constraints:
range: 1-20
 .1.3.6.1.4.1.171.10.75.15.2.45.1.1.3
limitIpMulticastProfileStatus
The status of an entry in the limit ip multicast profile Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.45.1.1.4

limitIpMulticastEntryTable

table
.1.3.6.1.4.1.171.10.75.15.2.45.2 · 1 row entry · 5 columns
Open in standard view 
A list of the limit ip multicast entry Table.
limitIpMulticastEntry entry .1.3.6.1.4.1.171.10.75.15.2.45.2.1
A limit ip multicast entry maintain by the start IP Address, end ip address, profile id.
Indexes
limitIpMulticastEntryIPType limitIpMulticastEntryProfileID limitIpMulticaststartIpAddr limitIpMulticastendIpAddr
Column Syntax OID
limitIpMulticastEntryIPType
Indicate the IP type of entry.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.171.10.75.15.2.45.2.1.1
limitIpMulticastEntryProfileID
The ProfileID of the limit ip multicast entry.
Integer32
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.10.75.15.2.45.2.1.2
limitIpMulticaststartIpAddr
The limit ip multicast IP address is used to set start ip
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.45.2.1.3
limitIpMulticastendIpAddr
The limit ip multicast IP address is used to set end ip
OctetString
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.45.2.1.4
limitIpMulticastStatus
The status of an entry in the limit ip multicast entry Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy)
are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.45.2.1.5

limitIpMulticastPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.45.3 · 1 row entry · 6 columns
Open in standard view 
A list of the limit ip multicast Port entry Table.
limitIpMulticastPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.45.3.1
A limit ip multicast entry maintain by the Port Index.
Indexes
limitIpMulticastPortIPType limitIpMulticastPortID
Column Syntax OID
limitIpMulticastPortIPType
Indicate the IP type of entry.
Enumeration
Enumerated Values:
1ipv4
2ipv6
 .1.3.6.1.4.1.171.10.75.15.2.45.3.1.1
limitIpMulticastPortID
The Port Index of the limit ip multicast port entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.45.3.1.2
limitIpMulticastPortState
The limit ip multicast port state
Enumerationr/w
Enumerated Values:
1permit
2deny
 .1.3.6.1.4.1.171.10.75.15.2.45.3.1.3
limitIpMulticastPortProfileID
The limit ip multicast port mapping profileID list.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.45.3.1.4
limitIpMulticastPortMaxGrp
The limit ip multicast per-port max group.
Integer32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.171.10.75.15.2.45.3.1.5
limitIpMulticastPortAction
The limit ip multicast port action.
Enumerationr/w
Enumerated Values:
1drop
2replace
 .1.3.6.1.4.1.171.10.75.15.2.45.3.1.6

sysGratuitousARPTable

table
.1.3.6.1.4.1.171.10.75.15.2.48.2.1 · 1 row entry · 2 columns
Open in standard view 
Set/Add Gratuitous ARP interface name and interval time.
sysGratuitousARPEntry entry .1.3.6.1.4.1.171.10.75.15.2.48.2.1.1
The entry of gratuitous ARP!
Indexes
sysGratuitousARPIFName
Column Syntax OID
sysGratuitousARPIFName
Interface name.
OctetString
Constraints:
range: 1-24
 .1.3.6.1.4.1.171.10.75.15.2.48.2.1.1.1
sysGratuitousARPInterval
Gratuitous ARP interval time for each interface.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.48.2.1.1.2

mcastFilterPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.49.1 · 1 row entry · 2 columns
Open in standard view 
A table to control multicast filtering modes.
mcastFilterPortEntry entry .1.3.6.1.4.1.171.10.75.15.2.49.1.1
An entry appears in this table for each interface in the mcastFiltertem.

Index to the table is the interface index of the port.
Indexes
mcastFilterPortIndex
Column Syntax OID
mcastFilterPortIndex
Interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.49.1.1.1
mcastFilterPortType
Configures the multicast filtering modes as below :
forward -Forwards all unregistered groups.
filter -Filters all unregistered groups.
Enumerationr/w
Enumerated Values:
1forward
2filter
 .1.3.6.1.4.1.171.10.75.15.2.49.1.1.2

neighborTable

table
.1.3.6.1.4.1.171.10.75.15.2.50.1 · 1 row entry · 7 columns
Open in standard view 
A list of the Neighbor Cache Table.
neighborEntry entry .1.3.6.1.4.1.171.10.75.15.2.50.1.1
A Neighbor cache entry containing the ifindex and ipv6 addr.
Indexes
neighborIfindex neighborIPv6Addr neighborMACAddr
Column Syntax OID
neighborIfindex
The interface index of the Neighbor entry.
Must be conform to the existing interface name.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.1
neighborIPv6Addr
Allows the entry of an IP address that will be a Neighbor entry into
the Neighbor Cache Table.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.2
neighborMACAddr
The MAC address associated of the Neighbor entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.3
neighborType
The type associated of the Neighbor entry.
Enumeration
Enumerated Values:
1static
2dynamic
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.4
neighborCacheState
The type associated of the Neighbor entry.
Enumeration
Enumerated Values:
1static
2reachable
3incomplete
4stale
5delay
6probe
7notinservice
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.5
neighborActiveStatus
The active status of the Neighbor entry.
Enumeration
Enumerated Values:
1active
2inactive
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.6
neighborRowStatus
The status of an entry in the Neighbor Cache Table. Only a subset
of the rowstatus variables (active, createAndGo, destroy) are available.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.50.1.1.7

eoamTable

table
.1.3.6.1.4.1.171.10.75.15.2.51.1.2 · 1 row entry · 7 columns
Open in standard view 
A table that contains EOAM mode information about each port.
eoamEntry entry .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1
A list of EOAM mode information for each port.
Indexes
eoamIfIndex
Column Syntax OID
eoamIfIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.1
eoamState
Sets the EOAM state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.2
eoamMode
Sets the EOAM mode as active or passive.
Enumerationr/w
Enumerated Values:
1passive
2active
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.3
eoamReceivedRemoteLoopback
Sets the EOAM received or ignore remote loopback packets.
Enumerationr/w
Enumerated Values:
1ignore
2process
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.4
eoamRemoteLoopback
Sets the EOAM remote loopback start or stop.
Enumerationr/w
Enumerated Values:
1noLoopBack
2startLoopBack
3remoteLoopBack
4stopLoopBack
5localLoopBack
6unknownLoopBack
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.5
eoamDyingGaspEnable
Sets the EOAM dying gasp state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.6
eoamCriticalEventEnable
Sets the EOAM critical event state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.1.2.1.7

eoamLinkMonitorTable

table
.1.3.6.1.4.1.171.10.75.15.2.51.2.1 · 1 row entry · 13 columns
Open in standard view 
A table that contains EOAM link monitor information about each port.
eoamLinkMonitorEntry entry .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1
A list of EOAM link monitor information for each port.
Indexes
eoamLinkMonitorIfIndex
Column Syntax OID
eoamLinkMonitorIfIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.1
errorSymbolNotifyState
Sets the EOAM error symbol notify state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.2
errorSymbolThreshold
Sets the EOAM error symbol threshold.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.3
errorSymbolWindow
Sets the EOAM error symbol window.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.4
errorFrameNotifyState
Sets the EOAM error frame notify state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.5
errorFrameThreshold
Sets the EOAM error frame threshold.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.6
errorFrameWindow
Sets the EOAM error symbol window.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.7
errorFrameSecondsNotifyState
Sets the EOAM error symbol notify state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.8
errorFrameSecondsThreshold
Sets the EOAM error symbol threshold.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.9
errorFrameSecondsWindow
Sets the EOAM error symbol window.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.10
errorFramePeriodNotifyState
Sets the EOAM error symbol notify state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.11
errorFramePeriodThreshold
Sets the EOAM error symbol threshold.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.12
errorFramePeriodWindow
Sets the EOAM error symbol window.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.171.10.75.15.2.51.2.1.1.13

duldTable

table
.1.3.6.1.4.1.171.10.75.15.2.52.1.1 · 1 row entry · 6 columns
Open in standard view 
A table that contains DULD mode information about each port.
duldEntry entry .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1
A list of DULD mode information for each port.
Indexes
duldIfIndex
Column Syntax OID
duldIfIndex
The index of the port.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1.1
duldState
Sets the DULD admin state enabled or disabled.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1.2
duldOperState
Gets the DULD Oper state enabled or disabled.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1.3
duldMode
Sets the DULD mode as shutdown or normal.
Enumerationr/w
Enumerated Values:
1shutdown
2normal
 .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1.4
duldLinkStatus
Gets the DULD link status.
Enumeration
Enumerated Values:
1unknow
2bidirectional
3txFault
4rxFault
5linkDown
 .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1.5
duldDiscoveryTime
Sets the DULD discovery time.
Unsigned32r/w
Constraints:
range: 5-65535
 .1.3.6.1.4.1.171.10.75.15.2.52.1.1.1.6

macBasedVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.70.1 · 1 row entry · 7 columns
Open in standard view 
A table that contains information on Vlan-MAC address 
mapping.
macBasedVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.70.1.1
Entry that contains Vlan-MAC address mapping.
Indexes
vlanMacMapIndex
Column Syntax OID
vlanMacMapIndex
Index of cmMacBasedVlanEntry. This object indicates the mac vlan entry for which
the configurations in cmMacBasedVlanEntry is to be done.
Integer32
Constraints:
range: 1-128
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.1
vlanMacMapAddr
The Mac address for which the Vlan mapping is present in the entry.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.2
vlanMacMapAddrMask
The Mac address for which the Vlan mapping is present in the entry.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.3
vlanMacMapVid
The Vlan to which the mac address of this entry is mapped to.
VlanIndexr/w
Textual Convention: VlanIndex Unsigned32
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.4
vlanMacStatus
The status given to the mac-vlan entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.5
vlanMacType
The type given to the mac-vlan entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.6
vlanMacMapRowStatus
The row status of the entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.70.1.1.99

macBasedVlanLearningTable

table
.1.3.6.1.4.1.171.10.75.15.2.70.2 · 1 row entry · 5 columns
Open in standard view 
A table that contains information on Vlan-MAC address 
mapping by sw learning.
macBasedVlanLearningEntry entry .1.3.6.1.4.1.171.10.75.15.2.70.2.1
Entry that contains Vlan-MAC address mapping by sw learning.
Indexes
vlanMacMapLearningAddr
Column Syntax OID
vlanMacMapLearningAddr
The Mac address for which the Vlan mapping is present in the learning entry.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.70.2.1.1
vlanMacMapLearningVid
The Vlan to which the mac address of this learning entry is mapped to.
VlanIndex
Textual Convention: VlanIndex Unsigned32
 .1.3.6.1.4.1.171.10.75.15.2.70.2.1.2
vlanMacLearningStatus
The status given to the mac-vlan learning entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.70.2.1.3
vlanMacLearningType
The type given to the mac-vlan learning entry.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.70.2.1.4
vlanMacMapLearningRowStatus
The row status of the learning entry.
SNMPv2-TCRowStatus
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.70.2.1.99

sysBPDUAttackCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.77.3 · 1 row entry · 4 columns
Open in standard view 
A table to control BPDU Attack features either for 
the entire switch or for each interface in the switch.
sysBPDUAttackCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.77.3.1
An entry appears in this table for each interface
in the system.
Indexes
sysBPDUAttackCtrlIndex
Column Syntax OID
sysBPDUAttackCtrlIndex
The interface index of the port for which the configuration
in this entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.77.3.1.1
sysBPDUAttackPortState
Used to configure the BPDU Attack Protection state of a port.
The default state is disable.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.77.3.1.2
sysBPDUAttackPortMode
Used to configure the BPDU Attack Protection mode of a port.
Enumerationr/w
Enumerated Values:
1drop
2block
3shutdown
 .1.3.6.1.4.1.171.10.75.15.2.77.3.1.3
sysBPDUAttackPortStatus
Use this to view per port BPDU attack protection status.
Enumeration
Enumerated Values:
1normal
2underAttack
 .1.3.6.1.4.1.171.10.75.15.2.77.3.1.4

dhcpv6RelayInterfaceSettingsTable

table
.1.3.6.1.4.1.171.10.75.15.2.86.2.1 · 1 row entry · 3 columns
Open in standard view 
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
dhcpv6RelayInterfaceSettingsEntry entry .1.3.6.1.4.1.171.10.75.15.2.86.2.1.1
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
Indexes
dhcpv6RelayInterface dhcpv6RelayServerIP
Column Syntax OID
dhcpv6RelayInterface
This object indicates the maximum number of router hops that the DHCPv6 packets can cross.
OctetString
Constraints:
range: 0-12
 .1.3.6.1.4.1.171.10.75.15.2.86.2.1.1.1
dhcpv6RelayServerIP
This object indicates the DHCP server IP address.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.86.2.1.1.2
dhcpv6RelayInterfaceSettingsRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.86.2.1.1.99

dhcpv6RelayOpt38Table

table
.1.3.6.1.4.1.171.10.75.15.2.86.4.1 · 1 row entry · 4 columns
Open in standard view 
A table to control port security features of the device.
dhcpv6RelayOpt38Entry entry .1.3.6.1.4.1.171.10.75.15.2.86.4.1.1
An entry appears in port security table for each interface
in the system.
Indexes
dhcpv6RelayOpt38PortIndex
Column Syntax OID
dhcpv6RelayOpt38PortIndex
The interface index for which the configuration in this
entry applies.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.86.4.1.1.1
dhcpv6RelayOpt38PortState
Enable / disable option 38 port state.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.86.4.1.1.2
dhcpv6RelayOpt38PortType
Configure option 38 port Type.
Enumerationr/w
Enumerated Values:
0default
1user-defined
 .1.3.6.1.4.1.171.10.75.15.2.86.4.1.1.3
dhcpv6RelayOpt38PortID
Configure option 38 port ID. Only works when type is user-defined
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.86.4.1.1.4

mldsVlanRouterTable

table
.1.3.6.1.4.1.171.10.75.15.2.88.3.3 · 1 row entry · 2 columns
Open in standard view 
This table contains the list of ports through which 
a router, in a particular VLAN is reachable.
mldsVlanRouterEntry entry .1.3.6.1.4.1.171.10.75.15.2.88.3.3.1
Contains the VLAN ID and list of ports on which
routers are present in the VLAN.
Indexes
mldsVlanRouterVlanId
Column Syntax OID
mldsVlanRouterVlanId
VLAN ID of the ports through which router is reachable.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.88.3.3.1.1
mldsVlanRouterPortList
List of ports on which routers are present.
These router ports are learnt through control messages
received from routers, and can also be configured
statically.
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.88.3.3.1.2

mldsVlanFilterTable

table
.1.3.6.1.4.1.171.10.75.15.2.88.3.4 · 1 row entry · 13 columns
Open in standard view 
This table contains configuration of snooping
on specific Vlans. This Table is valid only when VLAN is  
enabled in the system.
mldsVlanFilterEntry entry .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1
Contains snooping status , version and fast leave
configuration for a specific VLAN.
Indexes
mldsVlanFilterVlanId
Column Syntax OID
mldsVlanFilterVlanId
Index of MldsVlanFilterEntry. This object indicates the VLAN ID for which
the snooping configurations in MldsVlanFilterEntry is to be done.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.1
mldsVlanSnoopStatus
This object allows you to enable/disable MLDS function on a specific VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.2
mldsVlanQuerier
Indicates whether the switch is configured as a querier in the VLAN
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.3
mldsVlanCfgQuerier
The snooping switch can be configured as a querier via this object
to send out MLD general queries when IGMP routers are not present in the VLAN.
When set to 'enabled', the switch will generate general queries.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.4
mldsVlanQueryInterval
This is the interval (in seconds) for which the switch
sends general queries when it is configured as a querier for
the VLAN. A switch should be configured as a querier for a VLAN
only when there is no queriers in th…
Integer32r/w
Constraints:
range: 60-600
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.5
mldsVlanRtrPortList
List of ports which are configured statically as router ports
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.6
mldsVlanFbdRtrPortList
List of ports which can be configured statically as forbidden router ports.
PortListr/w
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.7
mldsVlanFastLeave
Enables or disables fast leave for the VLAN. When it is
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending
a group specific query before removin…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.8
mldsVlanDataDrivenLearningStatus
This object allows you to enable/disable
Data Driven Learning function on a specific VLAN.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.9
mldsVlanReportSuppression
Enables or disables Report suppression in the system.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.10
mldsVlanRobustnessValue
When the switch receives leave message on a port, it
sends group specific query to check if there are any other
interested receivers for the group. This attribute defines
the maximum number of queries sent by the swit…
Integer32r/w
Constraints:
range: 2-255
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.11
mldsVlanGrpQueryInterval
The value of this attribute defines the time period with which
the switch will send group specific queries on a port to check
if there is any intersted receivers. The switch will send
'mldsRobustnessValue' queries be…
Integer32r/w
Constraints:
range: 1-25
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.12
mldsVlanQueryMaxResponseTime
The maximum query response time advertised in MLDv1 general
queries on this interface.
Integer32r/w
Constraints:
range: 10-25
 .1.3.6.1.4.1.171.10.75.15.2.88.3.4.1.13

mldsVlanMulticastGroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.88.3.5 · 1 row entry · 4 columns
Open in standard view 
This table contains MAC based multicast forwarding 
information.
mldsVlanMulticastGroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.88.3.5.1
This table contains VLAN ID, multicast group MAC address and the
list of ports onto which the multicast data packets for group
should be forwarded.
Indexes
mldsVlanMulticastGroupVlanId mldsVlanMulticastGroupIpAddress
Column Syntax OID
mldsVlanMulticastGroupVlanId
VLAN ID pertaining to the Multicast forwarding entry
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.88.3.5.1.1
mldsVlanMulticastGroupIpAddress
Multicast group IP address. This object indicates that a
multicast group address was learned in the switch and be represented
as IP address format.
INET-ADDRESS-MIBInetAddress
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.88.3.5.1.2
mldsVlanMulticastGroupMacAddress
Multicast group MAC address. This object indicates that a
multicast group address was learned in the switch and be represented
as MAC address format.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.10.75.15.2.88.3.5.1.3
mldsVlanMulticastGroupPortList
List of ports onto which the multicast data
packets destined for this group will be forwarded.
PortList
Textual Convention: PortList OctetString
 .1.3.6.1.4.1.171.10.75.15.2.88.3.5.1.4

mldsHostTable

table
.1.3.6.1.4.1.171.10.75.15.2.88.4.1 · 1 row entry · 4 columns
Open in standard view 
This table is used to manage
the IGMP Host based Fast Leave function of the switch.
mldsHostEntry entry .1.3.6.1.4.1.171.10.75.15.2.88.4.1.1
Contains management entities for
IGMP Host based fast leave function.
Indexes
mldsHostTableVLANID mldsHostTableGroupAddress mldsHostTablePort mldsHostTableHostIPAddress
Column Syntax OID
mldsHostTableVLANID
VLAN ID of IPv6 Host table entry.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.88.4.1.1.1
mldsHostTableGroupAddress
Group address of IPv6 Host table entry.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.88.4.1.1.2
mldsHostTablePort
Port number of IPv6 Host table entry.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.88.4.1.1.3
mldsHostTableHostIPAddress
Host IP address of Group in IPv6 Host table entry.
Ipv6Address
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.10.75.15.2.88.4.1.1.4

pppoePortTable

table
.1.3.6.1.4.1.171.10.75.15.2.98.2 · 1 row entry · 7 columns
Open in standard view 
A table to control PPPoE features of the device.
pppoePortEntry entry .1.3.6.1.4.1.171.10.75.15.2.98.2.1
An entry appears in PPPoE table for each interface
in the system.
Indexes
pppoePortIndex
Column Syntax OID
pppoePortIndex
Interface index of the port for the configuration
in this entry applies.
Integer32
Constraints:
range: 1-6
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.1
pppoePortState
PPPoE per port state
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.2
pppoePortCircuitIDType
PPPoE per port circuit ID type
Enumerationr/w
Enumerated Values:
0ip
1mac
2udf
3vendor2
4vendor3
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.3
pppoePortUDFString
PPPoE per port UDF string
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.4
pppoePortCircuitIDVendor3String
PPPoE per port circuit ID vendor3 string
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.5
pppoePortRemoteIDType
PPPoE per port remote ID type
Enumerationr/w
Enumerated Values:
0default
1vendor2
2vendor3
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.6
pppoePortRemoteIDVendor3String
PPPoE per port remote ID vendor3 string
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.98.2.1.7

doSCtrlTable

table
.1.3.6.1.4.1.171.10.75.15.2.99.1 · 1 row entry · 8 columns
Open in standard view 
A table that holds the DoS prevention settings of the device.
doSCtrlEntry entry .1.3.6.1.4.1.171.10.75.15.2.99.1.1
A list of DoS prevention settings of the device.
Indexes
doSCtrlType
Column Syntax OID
doSCtrlType
This object indicates the DoS prevention type.
Enumeration
Enumerated Values:
1land-attack
2blat-attack
3smurf-attack
4tcp-null-scan
5tcp-xmascan
6tcp-synfin
7tcp-syn-srcport-less-1024
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.1
doSCtrlState
This object indicates the status of the DoS prevention type.
Enumerationr/w
Enumerated Values:
0disabled
1enabled
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.2
doSCtrlActionType
This object indicates the action for the DoS prevention type.
If this object is set to 'mirror' and DoSCtrlState is set to 'enable', the configuration
will not take effect until a valid mirror port is specified. If mi…
Enumerationr/w
Enumerated Values:
0drop
1mirror
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.3
doSCtrlMirrorPort
This object indicates the port to which the attack packet will be forwarded.
A value of 0 means that the DoS prevention action type is either not set to 'mirror'.
or the 'mirror' DoS action is not active. When DoSCtrlAc…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.4
doSCtrlMirrorReplace1P
This object indicates the packet to which the attack packet will be replaced 1p to mirror port.
The Range of 1p is 0 ~ 7. If value set to -1, it means no chenged.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.5
doSCtrlMirrorRxRate
This object indicates the packet to which the attack packet will be rate limited to mirror port.
The Range of rx limit is 0 or 64~1024000. If rate set to 0, it means no limit.
Integer32r/w
Constraints:
range: 0-1024000
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.6
doSCtrlFrameCount
This object indicates the frame counts of the DoS prevention type.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.7
doSCtrlClearFrameCount
This object will clear frame count when set to clear.
Enumerationr/w
Enumerated Values:
0normal
1clear
 .1.3.6.1.4.1.171.10.75.15.2.99.1.1.8

agentPORTutilizationTable

table
.1.3.6.1.4.1.171.10.75.15.2.100.3 · 1 row entry · 6 columns
Open in standard view
agentPORTutilizationEntry entry .1.3.6.1.4.1.171.10.75.15.2.100.3.1
Indexes
agentPORTutilizationPortIndex
Column Syntax OID
agentPORTutilizationPortIndex Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.100.3.1.1
agentPORTutilizationPortTX5sec SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.100.3.1.2
agentPORTutilizationPortRX5sec SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.100.3.1.3
agentPORTutilizationPortUtil5sec SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.100.3.1.4
agentPORTutilizationPortUtil1min SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.100.3.1.5
agentPORTutilizationPortUtil5min SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.10.75.15.2.100.3.1.6

protocolGroupNameTable

table
.1.3.6.1.4.1.171.10.75.15.2.101.1 · 1 row entry · 2 columns
Open in standard view 
A table to control protocol group name features of the device.
protocolGroupNameEntry entry .1.3.6.1.4.1.171.10.75.15.2.101.1.1
An entry appears in protocol group name table for each interface
in the system.
Indexes
protocolGroupGID
Column Syntax OID
protocolGroupGID
The group ID of protocol group name table.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.101.1.1.1
protocolGroupName
The group name of protocol group name table.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.10.75.15.2.101.1.1.2

protocolGroupTable

table
.1.3.6.1.4.1.171.10.75.15.2.101.2 · 1 row entry · 4 columns
Open in standard view 
A table to control protocol group features of the device.
protocolGroupEntry entry .1.3.6.1.4.1.171.10.75.15.2.101.2.1
An entry appears in protocol group table for each interface
in the system.
Indexes
protocolGroupId protocolGroupFrameType protocolGroupProtocolValue
Column Syntax OID
protocolGroupId
The group ID of protocol group table.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.101.2.1.1
protocolGroupFrameType
The frame type of protocol group table.
Enumeration
Enumerated Values:
1ethernet
2ieee8023-snap
 .1.3.6.1.4.1.171.10.75.15.2.101.2.1.2
protocolGroupProtocolValue
The protocol value of protocol group table.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.101.2.1.3
protocolGroupRowStatus
The row status of protocol group table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.101.2.1.99

protocolVlanTable

table
.1.3.6.1.4.1.171.10.75.15.2.101.3 · 1 row entry · 4 columns
Open in standard view 
A table to control protocol vlan features of the device.
protocolVlanEntry entry .1.3.6.1.4.1.171.10.75.15.2.101.3.1
An entry appears in protocol vlan table for each interface
in the system.
Indexes
protocolVlanPort protocolVlanVID protocolVlanGroupID
Column Syntax OID
protocolVlanPort
The interface number of protocol vlan table.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.101.3.1.1
protocolVlanVID
The vlan ID of protocol vlan table.
Integer32
Constraints:
range: 1-4094
 .1.3.6.1.4.1.171.10.75.15.2.101.3.1.2
protocolVlanGroupID
The group ID of protocol vlan table.
Integer32
Constraints:
range: 1-16
 .1.3.6.1.4.1.171.10.75.15.2.101.3.1.3
protocolVlanRowStatus
The row status of protocol vlan table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.10.75.15.2.101.3.1.99

l2PTPortTable

table
.1.3.6.1.4.1.171.10.75.15.2.102.2 · 1 row entry · 3 columns
Open in standard view 
A table that cont
ains the cable situation for each port.
l2PTEntry entry .1.3.6.1.4.1.171.10.75.15.2.102.2.1
A list of cable situations for each port on the device.
Indexes
l2PTPortIndex
Column Syntax OID
l2PTPortIndex
This object indicates the port number.
For all machines give maximum port number.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.102.2.1.1
l2PTPortType
This object indicates the Layer 2 protocol tunneling port type.

The 'none' value indicates that the port is normal. Layer 2 protocol tunneling
is disabled on this port.

The 'uni' value indi…
Enumerationr/w
Enumerated Values:
1none
2uni
3nni
 .1.3.6.1.4.1.171.10.75.15.2.102.2.1.2
l2PTProtocol
This object indicates the tunneled protocols on this port.
This object can only be applied on a UNI port.

If the 'stp' BIT is set, the STP BPDU will be tunneled.

If the 'gvrp' BIT is set, …
Bitsr/w
Enumerated Values:
0stp
1gvrp
2macCC
3macCD
4lldp
5isis
 .1.3.6.1.4.1.171.10.75.15.2.102.2.1.3

l2PTThresholdTable

table
.1.3.6.1.4.1.171.10.75.15.2.102.3 · 1 row entry · 2 columns
Open in standard view 
This table contains the protocol tunneling threshold of a UNI port.
l2PTThresholdEntry entry .1.3.6.1.4.1.171.10.75.15.2.102.3.1
A list with the Layer2 Protocol tunneling threshold.
Indexes
l2PTPortIndex l2PTProtocolIndex
Column Syntax OID
l2PTProtocolIndex
This object indicates the tunneled protocol of the port.
Enumeration
Enumerated Values:
1stp
2gvrp
3macCC
4macCD
5lldp
6isis
 .1.3.6.1.4.1.171.10.75.15.2.102.3.1.1
l2PTDropThreshold
This object indicates the drop threshold for a given protocol on a UNI port.
If the arrival rate of a tunneled protocol has reached its threshold, the received
PDUs of this protocol will be dropped.
The value 0 indicat…
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.10.75.15.2.102.3.1.2

sfpVendorInfoTable

table
.1.3.6.1.4.1.171.10.75.15.2.104.1 · 1 row entry · 11 columns
Open in standard view 
This table indicates the IP address as a destination to forward (relay) DHCP packets to.
sfpVendorInfoEntry entry .1.3.6.1.4.1.171.10.75.15.2.104.1.1
A list of information indicates the IP address as a destination to forward (relay) DHCP packets to.
Indexes
sfpPortIndex
Column Syntax OID
sfpPortIndex
The available of index for fiber ports.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.1
sfpConnectorType SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.2
sfpTranceiverCode SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.3
sfpBaudRate SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.4
sfpVendorName SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.5
sfpVendorOui SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.6
sfpVendorPn SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.7
sfpVendorRev SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.8
sfpWavelength SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.9
sfpVendorSn SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.10
sfpDateCode SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.104.1.1.11

ddmActionMgmtTable

table obsolete
.1.3.6.1.4.1.171.10.75.15.2.105.1.2 · 1 row entry · 3 columns
Open in standard view 
This table contains the configuration of the action taken 
when any parameter exceeds its threshold.
ddmActionMgmtEntry entry .1.3.6.1.4.1.171.10.75.15.2.105.1.2.1
This is an entry of the swDdmConfigActionTable.
Indexes
ddmActionPort
Column Syntax OID
ddmActionPort
This object indicates the port.
The available of index for fiber ports.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.105.1.2.1.1
ddmActionState obsolete
This object indicates the action type.
Enumerationr/w
Enumerated Values:
0disable
1enable
 .1.3.6.1.4.1.171.10.75.15.2.105.1.2.1.2
ddmActionShutdown obsolete
This object indicates the action type.
Enumerationr/w
Enumerated Values:
0none
1alarm
2warning
 .1.3.6.1.4.1.171.10.75.15.2.105.1.2.1.3

ddmThresholdMgmtTable

table
.1.3.6.1.4.1.171.10.75.15.2.105.1.3 · 1 row entry · 6 columns
Open in standard view 
This table contains DDM temperature configuration information.
ddmThresholdMgmtEntry entry .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1
This is an entry of the swDdmConfigThresholdTable.
Indexes
ddmThresholdPort ddmThresholdType
Column Syntax OID
ddmThresholdPort
This object indicates the port.
The available of index for fiber ports.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1.1
ddmThresholdType
This object indicates the threshold type.
Enumeration
Enumerated Values:
0temperature
1voltage
2bias
3txPower
4rxPower
 .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1.2
ddmHighAlarm
This object indicates the high alarm threshold value to be configured. As the
value is a floating point data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1.3
ddmLowAlarm
This object indicates the low alarm threshold value to be configured. As the
value is a floating data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1.4
ddmHighWarning
This object indicates the high warning threshold value to be configured. As
the value is a floating data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1.5
ddmLowWarning
This object indicates the low warning threshold value to be configured. As
the value is a floating data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.1.3.1.6

ddmStatusTable

table
.1.3.6.1.4.1.171.10.75.15.2.105.2.1.1 · 1 row entry · 6 columns
Open in standard view 
This table contains the DDM status information.
ddmStatusEntry entry .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1
This is an entry of the ddmStatusTable.
Indexes
ddmStatusPort
Column Syntax OID
ddmStatusPort
This object indicates the port.
The available of index for fiber ports.
Integer32
Constraints:
range: 1-28
 .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1.1
ddmTemperature
This object indicates the real time value of the temperature. As the value
is a floating point data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1.2
ddmVoltage
This object indicates the real time value of the supply voltage. As the value
value is a floating point data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1.3
ddmBiasCurrent
This object indicates the real time value of the tx bias.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1.4
ddmTxPower
This object indicates the real time value of the tx power. As the value
is a floating point data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1.5
ddmRxPower
This object indicates the real time value of the rx power. As the value is
a floating data type, the DisplayString type is used to define this parameter.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.171.10.75.15.2.105.2.1.1.1.6

swLedInfoTable

table
.1.3.6.1.4.1.171.10.75.15.2.121.1.1 · 1 row entry · 2 columns
Open in standard view 
This table contains the LED information.
swLedInfoEntry entry .1.3.6.1.4.1.171.10.75.15.2.121.1.1.1
A list of front panel LED information for each unit in the system.
Indexes
swLedInfoUnitId
Column Syntax OID
swLedInfoUnitId
The object indicates the unit ID.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.171.10.75.15.2.121.1.1.1.1
swLedInfoFrontPanelLedStatus
This object is a set of system LED indicators. The first 32 octets are
defined as next, and following octets are for logical port LED.

Octet 1 is console led:
0x01 = a user is login through console
0…
OctetString .1.3.6.1.4.1.171.10.75.15.2.121.1.1.1.2