stpBridgeMaxHop

DES-1210-28ME-B2 · .1.3.6.1.4.1.171.10.75.15.2.6.1.17
MIB view Table view

Object

scalar r/w Integer32 
The value that all bridges use for MaxAge when
this bridge is acting as the root. The granularity 
of this timer is specified to be 1 second.
An agent may return a badValue error if a set is
attempted to a value which is not a whole number
of seconds.

Context

MIB
DES-1210-28ME-B2
OID
.1.3.6.1.4.1.171.10.75.15.2.6.1.17
Type
scalar
Access
readwrite
Status
current
Parent
stpBridgeGlobal
Siblings
17

Syntax

Integer32

Values & Constraints

Object Constraints
range: 600-4000

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
stpModuleStatus
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled…
scalarEnumeration.1.3.6.1.4.1.171.10.75.15.2.6.1.1
stpRootCost
The Cost of the path to the CIST Root as seen from this bridge.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.10
stpMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…
scalarTimeout.1.3.6.1.4.1.171.10.75.15.2.6.1.11
stpForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines h…
scalarTimeout.1.3.6.1.4.1.171.10.75.15.2.6.1.12
stpRootPort
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.13
stpTopologyChangeTrapStatus
This object is for enabling or disabling topology change event trap in the system.
scalarEnumeration.1.3.6.1.4.1.171.10.75.15.2.6.1.14
stpNewRootTrapStatus
This object is for enabling or disabling new root event trap in the system.
scalarEnumeration.1.3.6.1.4.1.171.10.75.15.2.6.1.15
stpNewRootTrapsnode-.1.3.6.1.4.1.171.10.75.15.2.6.1.16
stpNniBpduAddr
The value dot1d(1) indicates that Tx BPDU Header should be 01-80-c2-00-00-00 on nni ports when qinq enabled. The value dot1ad(2) indicates that Tx BPDU Header should be 01-80…
scalarEnumeration.1.3.6.1.4.1.171.10.75.15.2.6.1.18
stpProtocolVersion
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' in…
scalarEnumeration.1.3.6.1.4.1.171.10.75.15.2.6.1.2
stpBridgePriority
The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
scalarInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.3
stpTxHoldCount
The value used by the Port Transmit state machine to limit the maximum transmission rate.
scalarInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.4
stpBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error …
scalarInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.5
stpBridgeHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
scalarInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.6
stpBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of Br…
scalarInteger32.1.3.6.1.4.1.171.10.75.15.2.6.1.7
stpFowardBPDU
This object is for enabling or disabling forward BPDU.
scalarEnumeration.1.3.6.1.4.1.171.10.75.15.2.6.1.8
stpRootBridge
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier…
scalarBridgeId.1.3.6.1.4.1.171.10.75.15.2.6.1.9