igsVlanFastLeave

DES-1210-28ME-B2 · .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.8

MIB view Table view

Object

column r/w Enumeration

Enables or disables fast leave for the VLAN. When it is 
'disabled',on reception of a leave message, the switch checks
if they are any interested receivers for the group by sending 
a group specific query before removing the port from the 
forwarding table. If set to 'enabled', the switch does not 
send a group specific query and immediately removes the port
from the forwarding table.

Context

MIB: DES-1210-28ME-B2
OID: .1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.8
Type: column
Access: readwrite
Status: current
Parent: igsVlanFilterEntry
Table: igsVlanFilterTable
Siblings: 16

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enabled
`2`	disabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
igsVlanFilterVlanId Index of IgsVlanFilterEntry. This object indicates the VLAN ID for which the snooping configurations in IgsVlanFilterEntry is to be done.	column	Integer32	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.1`
igsVlanQuerierVersionStatus This object allows you to enable/disable Querier Version function on a specific VLAN.	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.10`
igsVlanDataDrivenLearningAgeOutStatus This object allows you to enable/disable Data Driven Learning Age Out State on a specific VLAN.	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.11`
igsVlanReportSuppression Enables or disables Report suppression in the system.	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.12`
igsVlanRobustnessValue When the switch receives leave message on a port, it sends group specific query to check if there are any other interested receivers for the group. This attribute defines the ma…	column	Integer32	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.13`
igsVlanGrpQueryInterval The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there is any intersted receivers. The switch wil…	column	Integer32	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.14`
igsVlanQueryMaxResponseTime The maximum query response time advertised in IGMPv2 general queries on this interface.	column	Integer32	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.15`
igsVlanProxyReportingStatus This indicates the Proxy Reporting State of this VLAN. When set to enabled, intergrate into multiple IGMP reports or only integrate a single IGMP report for a specific (S,G) bef…	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.16`
igsVlanProxyReportingSourceIP This indicates the IP source address of the igmp report sended by the IGMP snooping proxy reporting in this VLAN.	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.17`
igsVlanSnoopStatus This object allows you to enable/disable IGS function on a specific VLAN.	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.2`
igsVlanQuerier Indicates whether the switch is configured as a querier in the VLAN	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.3`
igsVlanCfgQuerier The snooping switch can be configured as a querier via this object to send out IGMP general queries when IGMP routers are not present in the VLAN. When set to 'enabled', the swi…	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.4`
igsVlanQueryInterval This is the interval (in seconds) for which the switch sends general queries when it is configured as a querier for the VLAN. A switch should be configured as a querier for a VL…	column	Integer32	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.5`
igsVlanRtrPortList List of ports which are configured statically as router ports	column	PortList	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.6`
igsVlanFbdRtrPortList List of ports which can be configured statically as forbidden router ports.	column	PortList	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.7`
igsVlanDataDrivenLearningStatus This object allows you to enable/disable Data Driven Learning function on a specific VLAN.	column	Enumeration	`.1.3.6.1.4.1.171.10.75.15.2.10.3.4.1.9`