aclL2AccessID
DES-1210-28ME-B2 ·
.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.1
Object
column
Integer32
L2 Filter rule ID. 0 means auto assign.
Context
- MIB
- DES-1210-28ME-B2
- OID
.1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.1- Type
- column
- Access
- readonly
- Status
- current
- Parent
- aclL2RuleEntry
- Table
- aclL2RuleTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-250
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclL2RuleAction Specifies the action to be taken on the packet if the filter
rule matches.
If the action is 'allow', the packet will be forwarded according
to the forwarding rules.
If the action … | column | Enumeration | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.11 |
| aclL2RuleRateLimit Rate limit for matched packet. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.12 |
| aclL2RuleReplaceDSCP Replace DSCP for matched packet. | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.13 |
| aclL2RuleReplace1P Replace DSCP for matched packet. | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.14 |
| aclL2RuleReplaceQueue ACL L2 Rule Replace Queue. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.15 |
| aclL2RuleReplaceVLAN Replace VLAN for matched packet. | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.16 |
| aclL2RuleFilterTimeRange ACL L2 Filter Time Range | column | OctetString | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.17 |
| aclL2RuleVlanIdMask Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this co… | column | OctetString | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.18 |
| aclL2ProfileID ACL Profile ID which this rule join. | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.2 |
| aclL2RuleEtherType The value in the Type/Len field of a frame that will
be matched to trigger this filter. The default value of
this object is '-1', which means the rule don't care this
condition. | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.3 |
| aclL2RuleDstMacAddr Destination MAC address to be matched with the packet. By Default, the
Destination Mac Address will be zero,which means the rule don't care this
condition. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.4 |
| aclL2RuleSrcMacAddr Source MAC address to be matched with the packet. By Default, the Source
Mac Address will be zero, which means the rule don't care this condition..
address | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.5 |
| aclL2RuleInPortList Specifies the complete set of ports over which this filter is applied
for packets ingress at ports in this list. | column | PortList | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.51 |
| aclL2RuleVlanId Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will
be treated as customer Vlan Id. By Default, the value will be '-1',
which means the rule don't care this co… | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.6 |
| aclL2Rule1pPriority 802.1p priority to be matched with the packet. By Default, the value
will be '-1', which means the rule don't care this condition. | column | Integer32 | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.7 |
| aclL2RuleDstMacAddrMask The MAC address Mask work for Destination MAC address.
This field is read-only and copy from it's Profile setting. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.8 |
| aclL2RuleSrcMacAddrMask The MAC address Mask work for Source MAC address.
This field is read-only and copy from it's Profile setting. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.9 |
| aclL2RuleStatus This object indicates the status of this entry. An entry is
created in this table when this object is SET to 'createAndWait'.
The entry in this table is used when the status of th… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.10.75.15.2.15.2.1.1.99 |