agentPethFaultStatus

DELL-POWER-ETHERNET-MIB · .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.9
MIB view Table view

Object

column Enumeration 
Describes the error description when the pse port is in fault status.
A value of none(0) specifies that the pse port is not in any error state.
A value of mpsAbsent(1) specifies that the pse port has detected and absence
of main power supply.
A value of short(2) specifies that the pse port has detected a short circuit
condition.
A value of overload(3) specifies that the pd connected to the pse port had tried
to draw more power than permissible by the hardware. 
A value of powerDenied(4) specifies that the pse port has been denied power
because of shortage of power or due to administrative action.
A value of thermalShutdown(5) specifies that the thermal threshold has exceeded 
for the pse port.
A value of startupFailure(6) as fault status indicates that the port does not have
sufficient voltage.

Context

MIB
DELL-POWER-ETHERNET-MIB
OID
.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.9
Type
column
Access
readonly
Status
current
Parent
agentPethPsePortEntry
Table
agentPethPsePortTable
Siblings
12

Syntax

Enumeration

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
agentPethPowerLimit
The configured maximum power this port can provide to an attached device measured in Milliwatts.
columnMilliwatts SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.1
agentPethPortReset
A value of reset(1) is used to move the pse port dot3at state to idle. A read on this object will always return the value none(0). The value none(0) can not be forcibly set by the…
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.10
agentPethPowerLimitMin
The minimum power this port can be configured to provide, measured in Milliwatts.
columnMilliwatts SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.11
agentPethPowerLimitMax
The maximum power this port can be configured to provide, measured in Milliwatts.
columnMilliwatts SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.12
agentPethPowerClassifications
Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others…
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.13
agentPethOutputPower
The power this port is supplying to an attached device measured in Milliwatts.
columnMilliwatts SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.2
agentPethOutputCurrent
The current this port is supplying to an attached device measured in Milliamps.
columnMilliamps SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.3
agentPethOutputVolts
The voltage this port is supplying to an attached device measured in Volts.
columnVolts SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.4
agentPethTemperature
The temperature measured at this port of the PoE Controller. It is measured in degree celcius.
columnDEGREES SNMPv2-SMIGauge32.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.5
agentPethPowerLimitType
Describes or controls the maximum power that a port can deliver. A value of dot3at(1) means that the port power limit is as per the dot3at class of the PD attached. A value of use…
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.6
agentPethHighPowerEnable
true (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.7
agentPethPowerDetectionType
Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of dot3atonly(2) means that IEEE 802.3at detection scheme is use…
columnEnumeration.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.8