DELL-POWER-ETHERNET-MIB Table View

A table of per-port information and configuration objects relating 
to the power status of each port.

agentPethPsePortEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1

A collection of objects providing additional power information
and control parameters for the specified port.

Indexes

No indexes recorded

Column	Syntax	OID
agentPethPowerLimit The configured maximum power this port can provide to an attached device measured in Milliwatts.	MilliwattsSNMPv2-SMIGauge32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.1
agentPethOutputPower The power this port is supplying to an attached device measured in Milliwatts.	MilliwattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.2
agentPethOutputCurrent The current this port is supplying to an attached device measured in Milliamps.	MilliampsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.3
agentPethOutputVolts The voltage this port is supplying to an attached device measured in Volts.	VoltsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.4
agentPethTemperature The temperature measured at this port of the PoE Controller. It is measured in degree celcius.	DEGREESSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.5
agentPethPowerLimitType Describes or controls the maximum power that a port can deliver. A value of dot3at(1) means that the port power limit is as per the dot3at class of the PD attached. A value of user(2) means that the port power limit is …	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.6
agentPethHighPowerEnable true (1) The PSE port can deliver power up to 32Watts. false(2) The PSE port can deliver power up to 18Watts	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.7
agentPethPowerDetectionType Describes PD detection mechanism performed by the PSE port. A value of none(0) means no detection is done. A value of dot3atonly(2) means that IEEE 802.3at detection scheme is used. A value of dot3atandlegacy(3) means t…	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.8
agentPethFaultStatus Describes the error description when the pse port is in fault status. A value of none(0) specifies that the pse port is not in any error state. A value of mpsAbsent(1) specifies that the pse port has detected and absenc…	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.9
agentPethPortReset A value of reset(1) is used to move the pse port dot3at state to idle. A read on this object will always return the value none(0). The value none(0) can not be forcibly set by the administrtor.	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.10
agentPethPowerLimitMin The minimum power this port can be configured to provide, measured in Milliwatts.	MilliwattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.11
agentPethPowerLimitMax The maximum power this port can be configured to provide, measured in Milliwatts.	MilliwattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.12
agentPethPowerClassifications Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephones, WLAN access points and others, will be classified according to their …	Enumeration	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.1.1.13

A table of objects that display and control attributes
of the main power source in a PSE  device. Ethernet
switches are one example of boxes that would support
these objects.
Values of all read-write objects in this table are
persistent at restart/reboot.

agentPethMainPseEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1.1

A set of objects that display and control the Main
power of a PSE.

Indexes

No indexes recorded

Column	Syntax	OID
agentPethMainPseLegacy Enable/Disable Legacy device detection. The value true(1) means legacy devices are detected; the value false(2) means legacy devices are not detected.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.2.1.1.1

A table of per-unit information and configuration objects relating 
to the power configurtion for the entire pse unit.

agentPethPseEntry row .1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1

A collection of objects providing additional power information
and control parameters for the specified pse unit.

Indexes

No indexes recorded

Column	Syntax	OID
agentPethPsePowerManagementMode Describes or controls the power management algorithm used by the pse to deliver power to the requesting PDsthat a pds. A value of dynamic(1) means that power consumption of each port is measured and calculated in real…	Enumerationr/w	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1.1
agentPethPseThresholdPower Measured usage power expressed in Watts.	WattsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.674.10895.5000.2.6132.1.1.15.1.3.1.6