dsShdslRmtProviderCode

DASAN-SHDSL-MIB · .1.3.6.1.4.1.6296.9.6.1.1.2.1.8
MIB view Table view

Object

column OctetString 
This object identifies the provider code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop.

Context

MIB
DASAN-SHDSL-MIB
OID
.1.3.6.1.4.1.6296.9.6.1.1.2.1.8
Type
column
Access
readonly
Status
current
Parent
dsShdslLineStatusEntry
Table
dsShdslLineStatusTable
Siblings
35

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dsShdslOpState
This object identifies the high level operational state for the STU.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.1
dsShdslTxPower
This object identifies the local STU transmit power in tenths of a dBm.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.10
dsShdslFramerSync
This object returns information regarding the framer synchronization status.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.11
dsShdslRmtTomData
This object provides vendor-provided data, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.12
dsShdslDriftAlarm
This object identifies if the receive clock is in or out of range.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.13
dsShdslReceiverGain
This object provides the total receiver gain in dB.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.14
dsShdslBertError
This object provides the count of bit errors since the last time the object was read, as well as the type of synchronization.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.15
dsShdslFramerOHAndDefects
This object returns overhead data. The four least significant bits contain the overhead data in the following format: bit 0 is losd, bit 1 is sega, bit 2 is ps, and bit 3 is segd.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.16
dsShdslRmtFwVersion
This object provides the transceiver firmware release number of the STU at the other end of the loop.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.17
dsShdslUtopiaCellDelineation
This object indicates whether cell delineation has been found.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.18
dsShdslUtopiaRxCellCnt
This object indicates the number of UTOPIA cells received since the last time the object has been called. The maximum value is 0xFFFF.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.19
dsShdslStartProgress
This object identifies the current detailed operational state of the STU.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.2
dsShdslUtopiaCellDropCnt
This object indicates the number of UTOPIA cells dropped since the last time the object has been called. The maximum value is 0xFF.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.20
dsShdslUtopiaRxHecErrorCnt
This object indicates the number of UTOPIA cells with HEC errors since the last time the object has been called. The maximum value is 0xFF.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.21
dsShdslUtopiaTxCellCnt
This object indicates the number of UTOPIA cells transmitted since the last time the object has been called. The maximum value is 0xFFFF.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.22
dsShdslRmtNsfCusId
This object returns the customer identification that was sent by the STU at the other end of the loop.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.23
dsShdslRmtNsfCusData
This object returns non-standard format customer data that was sent by the STU at the other end of the loop.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.24
dsShdslLocalHandshake
This object provides a way to see what capabilities are supported by the local STU. A total of 26 handshake parameters are supported.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.25
dsShdslRemoteHandshake
This object provides a way to see what capabilities are supported by the STU at the other end of the loop. A total of 26 handshake parameters are supported.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.26
dsShdslActualHandshake
This object provides the results of capabilities exchanged during handshake. A total of 26 handshake parameters are supported.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.27
dsShdslRmtTxPower
This object provides the transmit power of the STU at the other end of the loop.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.28
dsShdslRmtPowerBackoff
This object indicates whether power backoff is enabled or disabled at the STU at the other end of the loop.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.29
dsShdslFwRelease
Transceiver firmware release number.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.3
dsShdslAutoRetrainCount
This object indicates the number of automatic retrains. This counter is only reset when a startup is initiated.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.30
dsShdslEocState
This object provides status information about the eoc stage.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.31
dsShdslFramerOneSecondCnt
This object provides CRC, SEGA, and LOSW defect one second error counts, and should be called every second.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.32
dsShdslNtrFault
This object identifies the Network Timing Recovery Fault.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.33
dsShdslCpeMasterCorecolumnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.34
dsShdslParametricTestResult
Indicates the Result of the Parametric Test conducted on the Xcvr.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.35
dsShdslParametricTestArray
Conexant parameter that indicates the Parametric Test Array.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.36
dsShdslLineSwap
This object indicates if the physical lines are swapped, i.e., logical channel A is connected to physical channel B. This applies to 4-wire operation only.
columnEnumeration.1.3.6.1.4.1.6296.9.6.1.1.2.1.4
dsShdslRmtCountryCode
This object provides the country code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. GlobespanVirata sets this to USA.
columnOctetString.1.3.6.1.4.1.6296.9.6.1.1.2.1.5
dsShdslRmtEncoderA
This object identifies the 21-bit value corresponding to encoder coefficient A, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.6
dsShdslRmtEncoderB
This object identifies the 21-bit value corresponding to encoder coefficient B, as defined in ITU-T G.991.2, for the STU at the other end of the loop.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.7
dsShdslLocDetect
This object is used to determine if carrier has been lost.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.6296.9.6.1.1.2.1.9