dsShdslBertError
DASAN-SHDSL-MIB ·
.1.3.6.1.4.1.6296.9.6.1.1.2.1.15
Object
column
Enumeration
This object provides the count of bit errors since the last time the object was read, as well as the type of synchronization.
Context
- MIB
- DASAN-SHDSL-MIB
- OID
.1.3.6.1.4.1.6296.9.6.1.1.2.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- dsShdslLineStatusEntry
- Table
- dsShdslLineStatusTable
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | outOfSync |
64 | framedSync |
128 | unframedSync |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dsShdslOpState This object identifies the high level operational state for the STU. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.1 |
| dsShdslTxPower This object identifies the local STU transmit power in tenths of a dBm. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.10 |
| dsShdslFramerSync This object returns information regarding the framer synchronization status. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.11 |
| dsShdslRmtTomData This object provides vendor-provided data, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.12 |
| dsShdslDriftAlarm This object identifies if the receive clock is in or out of range. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.13 |
| dsShdslReceiverGain This object provides the total receiver gain in dB. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.14 |
| dsShdslFramerOHAndDefects This object returns overhead data. The four least significant bits contain the overhead data in the following format: bit 0 is losd, bit 1 is sega, bit 2 is ps, and bit 3 is segd. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.16 |
| dsShdslRmtFwVersion This object provides the transceiver firmware release number of the STU at the other end of the loop. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.17 |
| dsShdslUtopiaCellDelineation This object indicates whether cell delineation has been found. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.18 |
| dsShdslUtopiaRxCellCnt This object indicates the number of UTOPIA cells received since the last time the object has been called. The maximum value is 0xFFFF. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.19 |
| dsShdslStartProgress This object identifies the current detailed operational state of the STU. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.2 |
| dsShdslUtopiaCellDropCnt This object indicates the number of UTOPIA cells dropped since the last time the object has been called. The maximum value is 0xFF. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.20 |
| dsShdslUtopiaRxHecErrorCnt This object indicates the number of UTOPIA cells with HEC errors since the last time the object has been called. The maximum value is 0xFF. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.21 |
| dsShdslUtopiaTxCellCnt This object indicates the number of UTOPIA cells transmitted since the last time the object has been called. The maximum value is 0xFFFF. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.22 |
| dsShdslRmtNsfCusId This object returns the customer identification that was sent by the STU at the other end of the loop. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.23 |
| dsShdslRmtNsfCusData This object returns non-standard format customer data that was sent by the STU at the other end of the loop. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.24 |
| dsShdslLocalHandshake This object provides a way to see what capabilities are supported by the local STU. A total of 26 handshake parameters are supported. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.25 |
| dsShdslRemoteHandshake This object provides a way to see what capabilities are supported by the STU at the other end of the loop. A total of 26 handshake parameters are supported. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.26 |
| dsShdslActualHandshake This object provides the results of capabilities exchanged during handshake. A total of 26 handshake parameters are supported. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.27 |
| dsShdslRmtTxPower This object provides the transmit power of the STU at the other end of the loop. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.28 |
| dsShdslRmtPowerBackoff This object indicates whether power backoff is enabled or disabled at the STU at the other end of the loop. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.29 |
| dsShdslFwRelease Transceiver firmware release number. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.3 |
| dsShdslAutoRetrainCount This object indicates the number of automatic retrains. This counter is only reset when a startup is initiated. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.30 |
| dsShdslEocState This object provides status information about the eoc stage. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.31 |
| dsShdslFramerOneSecondCnt This object provides CRC, SEGA, and LOSW defect one second error counts, and should be called every second. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.32 |
| dsShdslNtrFault This object identifies the Network Timing Recovery Fault. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.33 |
| dsShdslCpeMasterCore | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.34 |
| dsShdslParametricTestResult Indicates the Result of the Parametric Test conducted on the Xcvr. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.35 |
| dsShdslParametricTestArray Conexant parameter that indicates the Parametric Test Array. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.36 |
| dsShdslLineSwap This object indicates if the physical lines are swapped, i.e., logical channel A is connected to physical channel B. This applies to 4-wire operation only. | column | Enumeration | .1.3.6.1.4.1.6296.9.6.1.1.2.1.4 |
| dsShdslRmtCountryCode This object provides the country code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. GlobespanVirata sets this to USA. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.5 |
| dsShdslRmtEncoderA This object identifies the 21-bit value corresponding to encoder coefficient A, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.6 |
| dsShdslRmtEncoderB This object identifies the 21-bit value corresponding to encoder coefficient B, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.7 |
| dsShdslRmtProviderCode This object identifies the provider code word, as defined in ITU-T G.991.2, for the STU at the other end of the loop. | column | OctetString | .1.3.6.1.4.1.6296.9.6.1.1.2.1.8 |
| dsShdslLocDetect This object is used to determine if carrier has been lost. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.9.6.1.1.2.1.9 |