cyPMUnitPhases
CYCLADES-ACS5K-PM-MIB ·
.1.3.6.1.4.1.2925.8.5.3.1.12
Object
column
Enumeration
Number of phases of this PDU unit.
Context
- MIB
- CYCLADES-ACS5K-PM-MIB
- OID
.1.3.6.1.4.1.2925.8.5.3.1.12- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cyPMUnitEntry
- Table
- cyPMUnitTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | single-phase |
3 | three-phase |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cyPMUnitNumber The number of the PM unit in the daisy-chained mode. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2925.8.5.3.1.1 |
| cyPMUnitCycleInterval Number of seconds that a socket stays off
before turning it back on. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.10 |
| cyPMUnitID PDU identification. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2925.8.5.3.1.11 |
| cyPMUnitBanks Number of banks of this PDU unit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.13 |
| cyPMUnitNominalVoltage Nominal Voltage configured for this PDU unit, when it does not have voltage sensor | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.14 |
| cyPMUnitPower Power Consumption of this PDU unit (it is estimated when PDU does not have voltage sensor). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.15 |
| cyPMUnitVersion The software version of this PM unit. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2925.8.5.3.1.2 |
| cyPMUnitOutlets Number of outlets of this PM unit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.3 |
| cyPMUnitFirstOutlet Number of the first outlet of this PM unit. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.4 |
| cyPMUnitCurrent Current of this PM unit in AMP.
The value of this object is the actual current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the current is 0.5 AMP.) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.5 |
| cyPMUnitMaxCurrent Maximum current of this PM unit in AMP.
The value of this object is the maximum current in
AMP * 10. You need to translate the readed value
(Ex. : value is 5, the maximum current… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.6 |
| cyPMUnitSequenceInterval Sequence interval delay.
Valid values are 2 to 15 (seconds). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2925.8.5.3.1.9 |