portStatus
CUMULUS-POE-MIB ·
.1.3.6.1.4.1.40310.3.2.1.4
Object
column
Enumeration
The portStatus represents the current status of the port.
Context
- MIB
- CUMULUS-POE-MIB
- OID
.1.3.6.1.4.1.40310.3.2.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- poeObjectsEntry
- Table
- poeObjectsTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | unknown |
2 | disabled |
3 | searching |
4 | connected |
5 | powerdenied |
6 | fault |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portName The textual port name used by the system (such as swp1). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.40310.3.2.1.1 |
| portMaxPower The portMaxPower represents the maximum port power available
and is measured in milliwatts. An integer like 50400
should be divided by 1000 for a value of 50.4 Watts. | column | milliwatts MilliValue | .1.3.6.1.4.1.40310.3.2.1.10 |
| portAllocatedPower The portAllocatedPower represents the power allocated to the port
regardless of LLDP for the device in milliwatts. | column | milliwatts MilliValue | .1.3.6.1.4.1.40310.3.2.1.11 |
| lldpRequestedPower The lldpRequestedPower is either blank or the number of milliwatts
requested for the device via LLDP. | column | milliwatts MilliValue | .1.3.6.1.4.1.40310.3.2.1.12 |
| lldpAllocatedPower The lldpAllocatedPower is either blank or the number of milliwatts
allocated for the device via LLDP. | column | milliwatts MilliValue | .1.3.6.1.4.1.40310.3.2.1.13 |
| portPriority The portPriority is an integer value that determine which ports
should be shut down if the system is in a power limited
situation. Ports with low priority will get disconnected fi… | column | Enumeration | .1.3.6.1.4.1.40310.3.2.1.2 |
| portType The portType represents the type of DC power the system is
supplying to this port. POE is designated IEEE802.3af (2) and
POE+ is designated IEEE802.3at (3). UPOE is designated as … | column | Enumeration | .1.3.6.1.4.1.40310.3.2.1.3 |
| portClass The portClass represents the standard class of the port shown as
follows:
Class usage Class current Power range Class description
[mA] [Watt]
… | column | Enumeration | .1.3.6.1.4.1.40310.3.2.1.5 |
| portFourPairModeEnabled This object represents whether 4 Pair PoE mode is enabled or disabled
for the device on this port. An integer value of 1 means it is enabled
(true) and operating in 4 Pair PoE mod… | column | Enumeration | .1.3.6.1.4.1.40310.3.2.1.6 |
| portVoltage The portVoltage represents the port voltage in millivolts.
An integer like 50400 should be divided by 1000 for a value
of 50.4 Volts. | column | millivolts MilliValue | .1.3.6.1.4.1.40310.3.2.1.7 |
| portCurrent The portCurrent represents the port current in milliamps.
An integer like 50400 should be divided by 1000 for a value
of 50.4 Amps. | column | milliamps MilliValue | .1.3.6.1.4.1.40310.3.2.1.8 |
| portPower The portPower represents the port power usage in milliwatts.
An integer like 50400 should be divided by 1000 for a value
of 50.4 Watts. | column | milliwatts MilliValue | .1.3.6.1.4.1.40310.3.2.1.9 |