CUMULUS-POE-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
13

poeObjectsTable

table
.1.3.6.1.4.1.40310.3.2 · 1 row entry · 13 columns
Open in standard view
Uses the cumulus variant from /opt/observium/mibs/cumulus.
Command help
Walk poeObjectsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CUMULUS-POE-MIB' -M '/opt/observium/mibs/cumulus:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CUMULUS-POE-MIB::poeObjectsTable' 
This table displays POE current, voltage, type and other attributes
for each port.
poeObjectsEntry row .1.3.6.1.4.1.40310.3.2.1
An entry containing POE attributes (indexed by ifIndex).
Indexes
Column Syntax OID
portName
The textual port name used by the system (such as swp1).
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.40310.3.2.1.1
portPriority
The portPriority is an integer value that determine which ports
should be shut down if the system is in a power limited
situation. Ports with low priority will get disconnected first,
followed by high priority, then cri…
Enumeration
Enumerated Values:
1low
2high
3critical
 .1.3.6.1.4.1.40310.3.2.1.2
portType
The portType represents the type of DC power the system is
supplying to this port. POE is designated IEEE802.3af (2) and
POE+ is designated IEEE802.3at (3). UPOE is designated as high power (5).
Ports desigated as IEEE8…
Enumeration
Enumerated Values:
1none
2ieee802Dot3af
3ieee802Dot3at
4legacy
5highpower
6invalid
7ieee802Dot3afat
 .1.3.6.1.4.1.40310.3.2.1.3
portStatus
The portStatus represents the current status of the port.
Enumeration
Enumerated Values:
1unknown
2disabled
3searching
4connected
5powerdenied
6fault
 .1.3.6.1.4.1.40310.3.2.1.4
portClass
The portClass represents the standard class of the port shown as
follows:
Class usage Class current Power range Class description
[mA] [Watt]
========================================…
Enumeration
Enumerated Values:
0default
1verylowpower
2lowpower
3midpower
4highpower
 .1.3.6.1.4.1.40310.3.2.1.5
portFourPairModeEnabled
This object represents whether 4 Pair PoE mode is enabled or disabled
for the device on this port. An integer value of 1 means it is enabled
(true) and operating in 4 Pair PoE mode and a value of 2 means it is
disabled …
Enumeration
Enumerated Values:
1true
2false
 .1.3.6.1.4.1.40310.3.2.1.6
portVoltage
The portVoltage represents the port voltage in millivolts.
An integer like 50400 should be divided by 1000 for a value
of 50.4 Volts.
millivoltsMilliValue .1.3.6.1.4.1.40310.3.2.1.7
portCurrent
The portCurrent represents the port current in milliamps.
An integer like 50400 should be divided by 1000 for a value
of 50.4 Amps.
milliampsMilliValue .1.3.6.1.4.1.40310.3.2.1.8
portPower
The portPower represents the port power usage in milliwatts.
An integer like 50400 should be divided by 1000 for a value
of 50.4 Watts.
milliwattsMilliValue .1.3.6.1.4.1.40310.3.2.1.9
portMaxPower
The portMaxPower represents the maximum port power available
and is measured in milliwatts. An integer like 50400
should be divided by 1000 for a value of 50.4 Watts.
milliwattsMilliValue .1.3.6.1.4.1.40310.3.2.1.10
portAllocatedPower
The portAllocatedPower represents the power allocated to the port
regardless of LLDP for the device in milliwatts.
milliwattsMilliValue .1.3.6.1.4.1.40310.3.2.1.11
lldpRequestedPower
The lldpRequestedPower is either blank or the number of milliwatts
requested for the device via LLDP.
milliwattsMilliValue .1.3.6.1.4.1.40310.3.2.1.12
lldpAllocatedPower
The lldpAllocatedPower is either blank or the number of milliwatts
allocated for the device via LLDP.
milliwattsMilliValue .1.3.6.1.4.1.40310.3.2.1.13