cpqNicIfLogMapGroupType

The type of Fault Tolerance supplied by this logical adapter.
              
The following types of Fault Tolerance are supported:
              
unknown(1)
  Indicates that the instrument agent does not recognize the
  controller.  You may need to upgrade the instrument agent.
              
none(2)
  Indicates the logical adapter is not fault tolerant.
  There is a single physical adapter associated with the
  logical adapter.
              
redundantPair(3)
  Indicates that the logical adapter has two adapters associated
  with it.  One adapter is active and the other adapter is a
  hot standby.  No longer used.
              
nft(4)
  Network Fault Tolerance.  The logical adapter has two or more
  adapters associated with it.  One adapter is active on the
  network and the other(s) are hot standby(s).
              
alb(5)
  Adaptive Load Balancing. Indicates that the logical adapter has
  more than one physical adapter associated with it.  One adapter
  transmits and receives, while the others only transmit.  If the
  receiving adapter fails, one of the other adapters assumes this
  role.  No longer used.
              
fec(6)
  Fast EtherChannel.  This allows all physical adapters
  associated with the logical adapter to both receive and
  transmit.  This requires a switch that cooperates with
  the adapters.  If any adapter fails, the load is spread
  among the remaining adapters.  No longer used.
              
gec(7)
  Gigabit EtherChannel.  This allows all physical adapters
  associated with the logical adapter to both receive and
  transmit.  This requires a gigabit switch that cooperates
  with the adapters.  If any adapter fails, the load is
  spread among the remaining adapters.  No longer used.
              
ad(8)
  IEEE802.3ad Link Aggregation.  This allows all physical
  adapters associated with the logical adapter to both receive
  and transmit.  This requires a switch that cooperates with
  the adapters.  If any adapter fails, the load is spread
  among the remaining adapters.  No longer used.
              
slb(9)
  Switch-assisted load balancing.  This allows all physical
  adapters associated with the logical adapter to both receive
  and transmit.  This requires a switch that cooperates with
  the adapters.  If any adapter fails, the load is spread
  among the remaining adapters.  Aggregates fec, gec, and ad.
              
tlb(10)
  Transmit Load Balancing. Indicates that the logical adapter has
  more than one physical adapter associated with it.  One adapter
  transmits and receives, while the others only transmit.  If the
  receiving adapter fails, one of the other adapters assumes this
  role.  Formerly alb.
               
		 redundancySet(11)
  Indicates that the logical adapter has more than one adapter associated
  with it. This value is used when the type of the team could not be determined.
              
		 switchInd(12)
			 The teaming will work with any Ethernet switches - even non-intelligent switches.
              
		 lacp(13)
			IEEE 802.1ax works by using the Link Aggregation Control Protocol (LACP) to 
			dynamically identify links that are connected between the host and a given switch. 
              
		 team(14)
			just team.

MIB

CPQNIC-MIB

OID

.1.3.6.1.4.1.232.18.2.2.1.1.4

Type

column

Access

readonly

Status

mandatory

Parent

cpqNicIfLogMapEntry