sCellEventTrap_9_71

Severity: Normal -- informational in nature. The HSV110 controller identified in the handle field received a request to shutdown. <P> The old_attr.type field and field contain the value 1. The old_attr.value.u32[0] field indicates the type of restart that was requested as follows: <UL><LI>0 = None -- no restart <LI>1 = Regular -- full restart, host system connectivity is lost until the controller returns to normal operation <LI>2 = Fast -- resynchronization, restart of the controller in a manner that has little or no impact on host system connectivity </UL><P> The old_attr.value.u32[1] field indicates whether the other HSV110 controller of the pair was requested to remain operational or to also shutdown as follows: <UL><LI>0 = Remain operational <LI>1 = Coupled shutdown </UL><P> The old_attr.value.u32[2] field indicates whether the HSV110 controller was requested to remain in the power on state or power itself off as follows: <UL><LI>0 = Remain in the power on state <LI>1 = Power itself off </UL><P> The old_attr.value.u32[3] field value indicates whether the Physical Disk Drive enclosure(s) was requested to remain in the power on state or to be powered off as follows: <UL><LI>0 = Remain in the power on state <LI>1 = Powered off </UL><P> The old_attr.value.u32[4] field value indicates whether the battery assemblies located within the HSV110 controller were requested to be enabled or disabled as follows: <UL><LI>0 = Enabled <LI>1 = Disabled </UL><P> The old_attr.value.u32[5] field contains the number of seconds the shutdown operation was requested to be delayed.

MIB

CPQHSV110V3-MIB

OID

.1.3.6.1.4.1.232.0.13602417

Type

notification

Status

current

Parent

compaq