t38FaxRelayGrpEntry

CISCO-WAN-T38-FAXRELAY-MIB · .1.3.6.1.4.1.351.150.19.1.1.1.1

MIB view Table view

Object

row

An entry is created when a DS1 interface is 
configured. An entry is deleted when a DS1 
interface is removed. All configurations 
information in an entry is applied to a VoIP 
call when the VoIP call is placed on the DS1
interface.

Context

MIB: CISCO-WAN-T38-FAXRELAY-MIB
OID: .1.3.6.1.4.1.351.150.19.1.1.1.1
Type: row
Status: current
Parent: t38FaxRelayGrpTable
Table: t38FaxRelayGrpTable
Children: 15

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
t38vismDs1Number This object identifies the unique DS1 value for a T1/E1 interface.	column	Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.1`
t38NSFCountryCode The Country Code in the NSF code is a single-byte field identifying the country where the group 3 fax equipment with non-standard capabilities were manufactured. …	column	Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.10`
t38NSFVendorCode The Vendor Code (also called the Terminal Provider Code) in the NSF code is a two-byte field identifying the manufacturer of the group 3 fax equipment with non-standard capabilit…	column	Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.11`
t38NseAckTimeOut This object defines a timeout value in milliseconds for a provision able timer. This timer is started after sending a NSE(Named Signal Event) 200 while waiting for the NSE 201 ac…	column	milliseconds Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.12`
t38FxLCO This object is a configurable default value for the fx(fax option) in LCO(Local Connection Option). In the absence of the MGCP fx LCO, this default value will be used. The MGCP …	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.13`
t38Redundancy deprecated This object is used to enable/disable the Redundancy scheme for UDP-based fax transport.	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.14`
t38T30ECM This object is used to enable/disable T.30 Error Correcting Mode(ECM). ECM is a feature implemented by many new fax devices which improves image quality and page compression cap…	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.15`
t38MaxFaxTxRate This object is used for configuring the maximum fax transmission rate. 'fx2400bps' - maximum transmission rate in 2400 bps. 'fx4800bps' - maximum transmission rat…	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.2`
t38FaxInfoFieldSize deprecated This object is used to configure the fax information field size in bytes.	column	Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.3`
t38HsDataPacketSize This object specifies the size of primary high speed(HS) - the data packet transmitted after the first phase of a T.38 call. 'tenms' - size of the HS in 10 milli…	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.4`
t38LsDataRedundancy This object determines the extent of the internet fax protocol(IFP) packet transmission redundancy for the low-speed control information exchanged during the first phase of a T.3…	column	Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.5`
t38HsDataRedundancy This object determines the extent of the IFP packet transmission redundancy for the high-speed control and image information exchanged following the initial low-speed phase of…	column	Integer32	`.1.3.6.1.4.1.351.150.19.1.1.1.1.6`
t38TCFmethod This object determines the method used to verify the TCF(Training Check Field). For UDP-based fax transport, its value should be set to networkTCF. For TCP-based …	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.7`
t38ErrCorrection deprecated This object is used to enable/disable the FEC scheme for UDP-based fax transport.	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.8`
t38NSFOverride This object is used to enable/disable the gateway to override the NSF(Non-Standard Facilities) code in the following T.30 signals: NSF, NSC (Non-Standard Facilities Command) and …	column	Enumeration	`.1.3.6.1.4.1.351.150.19.1.1.1.1.9`

Indexes