bertLoopbackMask
CISCO-WAN-SRM-BERT-MIB ·
.1.3.6.1.4.1.351.110.6.1.28.1.7
Object
column
SNMPv2-SMIInteger32
Every loopback is represented by 2 bits of mask. Bits 0-5 are
valid in this integer. The meaning of the mask can be
understood from the example below:
----------------------------------------------
Loopback | SM | Test Medium
| support | Port
----------------------------------------------
Far End Loopback | 1 | 1
Facility Loopback | 1 | 1
Metallic Loopback | 1 | 0
----------------------------------------------
(Table contents applicable to FRSM-4T1)
bertLoopbackMask = 011111 binary
The column titles represent the variables bertLoopback
depends on. The mask is represented in column
major order.
Context
- MIB
- CISCO-WAN-SRM-BERT-MIB
- OID
.1.3.6.1.4.1.351.110.6.1.28.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- bertSupportedTestsTableEntry
- Table
- bertSupportedTestsTable
- Siblings
- 7
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| bertSupportedTestsTableIndex This index is the physical slot number of the Service
Module whose entry it represents in the table.
For MGX 8220, the range is 5-14.
For MGX 8850, the range is 1-6, 9-14, 17-2… | column | Integer32 | .1.3.6.1.4.1.351.110.6.1.28.1.1 |
| bertSupportFlag 'yes' if the table entry correctly represents the supported
tests for the SM on the corresponding slot. 'no' if no tests
at all are supported. | column | Enumeration | .1.3.6.1.4.1.351.110.6.1.28.1.2 |
| bertTestMediumMask Every test medium is represented by a bit of mask. Bits 0-1 are
valid in this integer. The meaning of the mask can be
understood from the example below:
-------… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.6.1.28.1.3 |
| bertModeMask Every mode is represented by 2 bits of mask. Bits 0-5 are
valid in this integer. The meaning of the mask can be
understood from the example below:
-----------------------------… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.6.1.28.1.4 |
| bertDeviceToLoopMask Every class of devices to loop is represented by 6 bits
of mask. Bits 0-29 are valid in this integer. The meaning
of the mask can be understood from the example below:
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.6.1.28.1.5 |
| bertPatternMask Every class of patterns is represented by 2 bits of mask.
Bits 0-3 are valid in this integer. The meaning of the
mask can be understood from the example below:
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.351.110.6.1.28.1.6 |
| bertCardT1E1Type Specifies whether a t1 or e1 card. | column | Enumeration | .1.3.6.1.4.1.351.110.6.1.28.1.8 |