CISCO-WAN-SRM-BERT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
10

bertDDSSeekResultsTable

table
.1.3.6.1.4.1.351.110.6.1.27 · 1 row entry · 2 columns
Open in standard view 
This table contains all available DDS patterns detected
and latched by an interaface(lines,ports etc) configured
to detect DDS patterns.
bertDDSSeekResultsTableEntry entry .1.3.6.1.4.1.351.110.6.1.27.1
An entry in the detected DDS codes table.
Indexes
bertDDSSeekResultsTableIndex
Column Syntax OID
bertDDSSeekResultsTableIndex
Denotes the serial number of the entry in the table.
Integer32
Constraints:
range: 1-20
 .1.3.6.1.4.1.351.110.6.1.27.1.1
bertDDSCode
Denotes the type of DDS code detected.
Enumeration
Enumerated Values:
10block
24unassignedMuxChannel
26muxOutOfSync
28test
30abnormalStationCondition
40channelLoopback
42ocuLoopback
44dsuLoopback
50unnamed
58transitionInProgress
86loopbackEnable
90farEndVoice
108testAlert
114mjuAlert
120release
126idle
 .1.3.6.1.4.1.351.110.6.1.27.1.2

bertSupportedTestsTable

table
.1.3.6.1.4.1.351.110.6.1.28 · 1 row entry · 8 columns
Open in standard view 
A list of supported tests for a given SM.
bertSupportedTestsTableEntry entry .1.3.6.1.4.1.351.110.6.1.28.1
A general supported tests entry.
Indexes
bertSupportedTestsTableIndex
Column Syntax OID
bertSupportedTestsTableIndex
This index is the physical slot number of the Service
Module whose entry it represents in the table.
For MGX 8220, the range is 5-14.
For MGX 8850, the range is 1-6, 9-14, 17-22, 25-30.
Integer32
Constraints:
range: 1-30
 .1.3.6.1.4.1.351.110.6.1.28.1.1
bertSupportFlag
'yes' if the table entry correctly represents the supported
tests for the SM on the corresponding slot. 'no' if no tests
at all are supported.
Enumeration
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.351.110.6.1.28.1.2
bertTestMediumMask
Every test medium is represented by a bit of mask. Bits 0-1 are
valid in this integer. The meaning of the mask can be
understood from the example below:

--------------------------
TestMedium | …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.6.1.28.1.3
bertModeMask
Every mode is represented by 2 bits of mask. Bits 0-5 are
valid in this integer. The meaning of the mask can be
understood from the example below:
-----------------------------------------------------------
Mode …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.6.1.28.1.4
bertDeviceToLoopMask
Every class of devices to loop is represented by 6 bits
of mask. Bits 0-29 are valid in this integer. The meaning
of the mask can be understood from the example below:

-------------------------------…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.6.1.28.1.5
bertPatternMask
Every class of patterns is represented by 2 bits of mask.
Bits 0-3 are valid in this integer. The meaning of the
mask can be understood from the example below:

----------------------------------------…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.6.1.28.1.6
bertLoopbackMask
Every loopback is represented by 2 bits of mask. Bits 0-5 are
valid in this integer. The meaning of the mask can be
understood from the example below:
----------------------------------------------
Loopback …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.351.110.6.1.28.1.7
bertCardT1E1Type
Specifies whether a t1 or e1 card.
Enumeration
Enumerated Values:
1t1
2e1
 .1.3.6.1.4.1.351.110.6.1.28.1.8