cwrChanOamLoopbkTxInterval

CISCO-WAN-RPM-CONN-EXT-MIB · .1.3.6.1.4.1.351.150.9.1.1.1.1.6

MIB view Table view

Object

column r/w seconds Unsigned32

This specifies how often to generate an OAM F5 loopback cell
from this channel.  0 will disable generation of OAM F5
loopback cells.

Context

MIB: CISCO-WAN-RPM-CONN-EXT-MIB
OID: .1.3.6.1.4.1.351.150.9.1.1.1.1.6
Type: column
Access: readwrite
Status: current
Units: seconds
Parent: cwRpmChanExtEntry
Table: cwRpmChanExtTable
Siblings: 9

Syntax

seconds Unsigned32

Values & Constraints

Object Constraints

range: 0-600

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cwrChanSubInterface The RPM's backplane sub-interface for which this channel is configured. Sub-interface 0 means the switch port.	column	Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.1`
cwrChanOamRetryInterval The frequency that end-to-end F5 OAM loopback cells are transmitted when a change in UP/DOWN state of a PVC is being verified. This object only applies if OAM management is enable…	column	seconds Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.10`
cwrChanVcd Virtual Circuit Descriptor. A unique number which identifies a connection.	column	Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.2`
cwrChanAalEncapType ATM adaptation layer (AAL) and Encapsulation type. aal5ciscoPPP - For Cisco PPP over ATM. 'cwrChanVirtualTemplate' is required to be …	column	Enumeration	`.1.3.6.1.4.1.351.150.9.1.1.1.1.3`
cwrChanVirtualTemplate This object identifies the virtual template. The non-zero value need to be specified for Cisco PPP or MUX-type PPP encapsulation (i.e. cwrChanAalEncapType = aal5c…	column	Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.4`
cwrChanInArpInterval This specifies how often Inverse ARP datagrams will be sent on this channel. 0 will disable the InArp for this channel. This object is only supported for aal5snap encapsulation (…	column	minutes Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.5`
cwrChanOamManage This enables/disables OAM management for this channel. If set to true(1), OAM management is enabled.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.351.150.9.1.1.1.1.7`
cwrChanOamRetryUpCount Number of consecutive end-to-end F5 OAM loopback cell responses that must be received in order to change a PVC connection state to up. This object only applies if OAM management i…	column	Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.8`
cwrChanOamRetryDownCount Number of consecutive end-to-end F5 OAM loopback cell responses that are not received in order to change a PVC connection state to down. This object only applies if OAM management…	column	Unsigned32	`.1.3.6.1.4.1.351.150.9.1.1.1.1.9`